Matco Tools $23.00 A Week Gets You A Roll Cart PLUS $1000 In Tools. Serpentine Belt Wrench Set
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- Roll Cart Deals are back on the Matco truck and we look at the serpentine belt wrench kit.
Thanks for watching ! I truly appreciate each and every view we get on our videos. Your support and comments are truly amazing. You guys that are subscribed, are awesome, thanks for giving us your time to watch the videos.
If you aren’t subscribed to my channel, please subscribe, it doesn’t cost you a single dime !
Follow me on Instagram: KoonTrucking and Diesel Medic we always post interest and funny content plus some cool pics we take of jobs and new tools. TikTok: Koon Trucking
If you are interested in Koon Trucking or Diesel Medic shirts or stickers teespring.com/...
Here are some of my favorite links to get some awesome tools and coupon and discount codes to save you some money.
Be sure to check them out (just clicking my link and getting to Amazon helps to support the channel. Even if you don’t buy the item listed, just using my link and then choosing another item will help)
For some of my favorite tools click the link here: www.amazon.com...
Bolster Bolt Organizer 10% Off use KoonTruck10 boltster.com/?...
That code will even work on Amazon amzn.to/3fV9TKI
www.gripty.com code KOON10 for 10% off
www.motivxtools.com use code KOON for 10% off entire order
Olsa Tools: Use the code KOON to save 10% off your purchases rebrand.ly/KOON
OTR Performance a cheap and effective way to clear codes and force a regen. Use this link and reference code: CKoon to save 5% off
otrperformance... this is a owner ops dream!
Rinse Kit rinsekit.com/?...
Check out www.vampiretools.com and use the code KOON15 and save 15% off your entire purchase plus free shipping in the Cont. US
LunchEaze luncheaze.com/... $5 off purchase
Type E Marking Paste type-e-marking...
Tribus Tools: bit.ly/2MalUQ0 use code: koontrucking save 5% plus free shipping
Wera Screwdrivers and other awesome German Tools: www.kctoolco.c...
Capri Tools Work Light: 620 Lumens of awesome: www.amazon.com...
Tekton 1/4” socket set www.amazon.com...
Grey Pneumatic Duo-Socket Set Metric Master Set. This is an awesome set can be used on a ratchet or impact!! www.amazon.com...
Lang Tools Master Feeler Gauges:
www.amazon.com...
Gearwrench Bolt Biter Set 👍🏻 www.amazon.com...
OEM Tools Magnetic Rechargeable Light (the battery life is amazing on this light, super bright. My favorite magnetic light)
www.amazon.com...
Knipex Cobra Pliers (some of my go to Pliers):
www.amazon.com...
Streamlight Stylus Pro Rechargeable Flashlight:
www.amazon.com...
I use Tub O Towels to keep all my tools looking nice and clean. Here is the link to them:
www.amazon.com...
Gearwrench Brake Reset Tools (Drum Brakes): www.amazon.com...
Email: koontrucking101@gmail.com
Koon Trucking
200 Davidson Dr.
Booneville MS 38829
Follow our Diesel Medic channel / @dieselmedic5673
I wish my matco guy did deals like this! I’d be all over it!
BMW said transmissions have life long fluid in sealed cases, then they decided to delete the oil dipstick in 06 and rely on a sensor to tell you how much engine oil it has. Imo that's ridiculous.
Even the regular engine oil level . Cars say full but no physical way to actually tell
It appears the Matco truck is better stocked and a little neater than Hamilton’s Snap-On truck.
I've never been on a matco truck that was a mess. My snap on reps have boxes everywhere... hell my snap on guy you can't even get to the back half of his truck.
Love snapon better than any other tool truck but seems like a bull has hit our snap on truck. You will be just talking to the snapon man and shit just falls off the shelves or the ceiling. Meanwhile the matco man has his wife dust the shelves at every stop. Lol
We just got a matco truck for the first time in 2 years, first new guy in 5 in our area, poor guy makes the hole Micheal had to climb out of look like a puddle. The man's got a lake to dry out but at the end of the day he's got lots of customers who have wanted to purchase his brand for a long time.
When I started as a tech Matco hooked me up with $20 dollars a week on a 4s box... Got to give it to Matco made it affordable for me as a young tech starting off..Great videos always waiting for the next one 👍
You probably dont give a damn but does anyone know of a tool to log back into an instagram account?
I was dumb lost the login password. I appreciate any tips you can offer me.
@Aries Sterling instablaster =)
@Dax Taylor thanks for your reply. I found the site on google and I'm in the hacking process now.
Seems to take a while so I will get back to you later with my results.
@Dax Taylor It worked and I actually got access to my account again. I am so happy:D
Thank you so much you saved my ass :D
@Aries Sterling no problem :D
I used to "help" my dad I was a kid lol. He used to clean and reset the truck every few months. And every day was reset and reload. I didn't see him much lol.
That beef jerkey is awesome 👌. Black pepper is my favorite.
My dad has a friend that was a sales rep for a couple scan tool companies.First one was Allen Test,he ended up leaving them after SPX bought them out.Allen Test ended up being discontinued after the buyout.Then he was a salesman for Vetronix,was forced into retirement by Bosch after Bosch bought out Vetronix in 2003.Reason was Bosch found out he was one of two reps that made the most money,wanted to cut his commission and pay to save money.
I wish i had a matco guy in my area like this i haven't hade one in about 8 years
Here’s hoping that you and your family stay safe thru these 2 storms. Same to all the tool trucks that come your way. Great video, Michael’s wife was funny with her facial expressions. Stay safe you all.🙏
My Toyota 70 Series LandCruiser has a metal dash, even the glove box door is metal. It is 1991 though.
They still make them but they have put a plastic dash in them for the airbags.
Un-fortunately they don't sell them in the US
Just a thought about your comment about the gauges a vehicle should have.
On modern aircraft, they have what is called a Glass Cockpit. All the gauges have been replaced with screens. All the gauges are still there on the screens.
Now, modern vehicles all come with a small screen, it wouldn't take much to have a page in the software that you display all the gauges you wanted on the standard screen.
Today I got the new Matco 1/2 Impact MT2779 green this impact is SWEET a real power house I'm so happy i got this today! Every one in the shop wish they got one! Me working in a small engine repair shop for 44 years by far the Matco MT2779 impact is the best so being that said all you tech's get one better that a snap on and I like snap on too but Matco has the better deal on price and a more powerful tool.
He always has amazing deals on tool carts
Micheal seems like a nice guy sounds like pretty good mechanic to sure is not pushy either
That thousand dollars in free tools is the best thing going Matco came by two months before a new rep was starting a route when he finally showed up the second week I jumped right on it..my dealer is the man he let me put it right on the truck account long story short it's paid off and I have a top drawer and it's stuffed I'm not getting a hutch I'm going for the top box..!
The plastic push lock fuel and air lines on trucks were developed to make it easier to assemble the vehicle. No wrenches on the assembly line. Just snap it together. Headaches for the mechanics and more repair cost for the vehicle owners.
I actually really like the push lock air lines....so much easier than a seized swivel style airline
Good points made in this video, and it really showed how good of a Matco dealer Michael is. As mechanics we pay the premium for the tool man to come by every week and have what we need or replace tools that need replaced. I hate hearing stories of dealers refusing to warranty tools, those jokers are in the wrong business.
I used to buy Napa’s tools until I had one computer wannabe mechanic who wouldn’t warranty their tools. I got a hold of another persons attention via Facebook and he contacted me and warrantied my tools. Then I ended up trading them in for Matco
Somewhere along the line the "Tool" part of the tool truck videos is getting lost.
DIY Steve this was a tool video? I thought it was a vlog
The tools never change, he wouldn’t have anything to film every week. This is mostly what mechanics do on tool trucks
I usually do my own work on my truck, but I was in a pinch on time so I took my truck in for an oil change. I drove across America then did another oil change my self. When I took the oil filter off, it was the same size as my wife 4 cylinder. These sob’s put a 4 bang filter on my v8. 🤦♂️🤦♂️🤦♂️🤦♂️
It only took me once to figure out I need tp work on my own cars. I worry about the day I no longer can.
I think if Joe went with Grey Pneumatic, Astro Pneumatic, KC Tools, SP Tools, or something like that I agree he would be way better off
12:53 mark. His wife's face says it all 😂😂😂
She needs to join in the conversation. It’s odd that she’s just standing there smiling occasionally.
I feel like a could write a Dr.Seuss rhyme with my tool collection. I have old tools and new. I have black Matco sockets and chrome Cornwell extensions too. I have orange pry bars handles and snap on blue. I have a great big red box and a tiny blue. I have really expensive PICO scope and cheap harbor freight stool!
“Nothing is built to last”. I reckon that’s part of the “planned obsolescence” of the business world. I hope Michael doesn’t plan to move to another “tool truck” brand; his Better-half would have to order different hats. I enjoy watching the tool truck films and seeing an independent business owner successful from the dedication, hard work, and honesty (from what I’ve observed) that is needed.
If I may say Mr. Clay, I don’t know if it was the angle you’re holding the camera or not, but you looked “give out” in the intro.
Micheal always has new tools to show very good. His boss is doing a job keeping him on track. Miss bill hope him and his family are well.
my 1930s snap on and mac sockets are still going strong. The metals used today are cheaper
Man you have been turning wrenches a long while.
@@harveysmith100 when my grandfather passed, I was given some of his tools. I took all the big sockets to work and use them everyday. Most are 30s-50s era sockets. All my metric stuff is new however.
@@CalebsCars That makes sense. I thought you must be 110 years old.
@Flat Bastard Engineering Channel most metals today used for alot of tool brands are recycled metals and even when made in USA, the recycled metal was still purchased elsewhere.
@@harveysmith100 a lot of Proto stuff too. I beat the crap out of them everyday on semi's and trailers and they handle every bit of it.
Current vehicles are built to last till its outnof warranty. After that they dont care if it dissentegrates.
Plastic fuel lines can be repaired. There is quick connects like shark bites or can be repaired with special clamps.
Man i wish I had a matco dealer in my area thatd do that I can work with that man thats awsome
Dam. Thats not a bad deal. Wish my matco dealer would do this.
The reason for the tape over the ABS light or whatnot, in trucking at least, is that dot inspectors have been known to dock drivers for having such lights on. I haven't actually looked up the regulation in the FMCSA book but I was dispatching a driver who dealt with that once. As we say, don't give them anything to latch onto ...!
Pretty nice tool cart might have to look into one
I will say i have recently ran my truck with 1.5qts of oil not knowing because i trusted my light that never can't on
I’d say after being in the business 5 years and you know your going to do it the rest of your life then go big or go home get the biggest box they offer and be done
Wise old tech once told me..."a tool box is just storage, spend your money on the tools and not the box"
Couldn't have said it better myself. Tools over anything.
I need something like that in my life down here in south Louisiana
I would like to see Michael's wife(the BOSS) do some more tool selling or at least talk. She looks really bored watching you guys just talk it up. She did a fabulous job demonstrating that light pack a little while back. Other than that, love the videos.
Maybe he has a deal with the wife where her job is to just look pretty.
My first tool box was Plastic Tubes and lids...Stacked them 3 high...Hell I would have used a cardboard box..Till I knew I was going to stick around...As I seen people go $5k in debt. And not enough business to pay for lunch. Much less their tool bill...
Lol, I’ve blown 2 plastic oil plugs out of my mustang... the life blood of an engine, they are insuring with plastic...
Not even an Anvil lasts forever now. Hard to believe but I’ve seen many horns break off. That’s why those OLD anvils are never for sale unless it’s an estate auction
That purple trim box is SEXY!!!!!!
I refuse to send a tool in. I'd rather just get rid of it. I paid alot of money for this tool for the service. I shouldn't have spend even $1 to mail a tool in. I told that to snap on and they ended up mailing me my rebuild kits for my ratchets
snap on sends you a shipping label for everything no questions asked.
@@ron4america386 damn, news 2 me. Go Snap on.
Hey Clay if you want to get that check engine light to stay off in the Envoy you can buy oxygen sensor defoulers for the rear oxygen sensor they work great and are very easy to install
I w thought about it but it doesn’t bother me because I know what it is. If I was to sell it I would put them on it.
I wish the local Matco guy would stop by our shop. He told us he was too busy for us
That sucks but it’s his loss
@@KoonTrucking you get all the good tool truck guys haha
I've learned people don't actually care about the vehicle they spent thousands on worked on a Escalade yesterday. (Replaced trans) they refused to replace a leaking rear main seal and exhaust gasket....which the exhaust came off to pull the trans anyway....
I’ve got that serpentine belt tool kit. Love it. My guy might not be matco Michael but he’s just as awesome
Those old fords used to have oil level sensor light comes on if you need oil 😉😉
Great video y'all have a great week and stay safe 👍
Only $23.00 a week and the MATCO guy owns your soul.
We had a Marco dealer. He still owns the rout and won't let the other guy come through. He stops across the street. Bull shit
Fords theory need for dipstick because owners don't take time to check anyways.
And the plastic oil pans will not fail because about every 4th oil change it will need new sealant and a new pan installed. Just cut a dang groove and install a rubber seal like old days and stop the leaking pans FORD.
can I get a part number on the Matco eagle
The only thing that engineers think of is ease of assembly how quick can we get it together
They also think of the budget they have to meet or get their ass canned. Lol
Yep, they design this crap to be assembled easier in the factory. They don't care that the mechanic has to remove the engine just to replace a part. The non-serviceable transmission filter is the biggest joke.
i think the air filter on an 05 - 07 focus is funnier than the ns trans filter. also, automotive engineers seem to take into consideration how to make doing maintenance frustrate the customer to the point where they pay for the maintenance to be done. the engineers that can make it such a pain in the ass to the point that shops won't deal with it leaving taking it to the dealership is the only option, those engineers get bonuses
Check fluids every time you drive it.
You can always be like John Shelton and win a Matco tool truck
Damn he won or gave away a truck? Gotta hear this one
Koon Trucking he won his matco truck from a drawing they had goin on when he started out. He runs in tupelo or used to anyway
Wish we could have matco here in the UK. Love the videos 👍🏻
Man I tell you what, the tool truck guys here in Idaho ain't friendly at all. Nothing like the guys you have over there. I've tried to set up deals where I'll pay $100 a week with my credit card and they turned me down. I have to order tools from Matco, Snap-on and Mac directly.
That sucks. Generally people in the South are all the same. What you see on these videos is pretty much how it is. It’s a different world around us and we like it just the way it is down here!
It's nylon not "plastic"... they're really good fuel lines actually.... it's the master kit to service them that costs pretty good chunk of money....
You bringing up plastic pans made me think of those damn Paccar oil pans with those stupid plastic drain plugs
this reminded me of the #2 rule of being a diagnostic/troubleshooting mechanic/diagnosing anything (all credit to aVe btw) dont trust the guy that worked on it before you .. if he said he checked something assume he really didnt no matter who it is. i dont know how many jobs i did prior to ascertaining this line of thinking, hey cody this truck needs this valve put on and my dumbass would just change it rather than diagnose it myself,and making double work. problem would end up being something totally different 4 times outta 10 roundabout.
for more on the subject look up 3 simple rules for troubleshooting problems aVe
AvE
1. Do the easiest thing first
2. Don't rely on the people that tried and failed prior
3. 90% of problems are between the driver's seat and the steering wheel
Bonus: If it can go wrong, it WILL go wrong. (Murphy's Law)
$23 a week. You CAN go wrong with that lol.
I will a have a new Matco dealer in October, because I am moving the shop to a new location across town and I will own the building no landlord! But the new location is not on my current guys route. I hope he doesn’t suck, What I am worried he might not warranty anything I bought from the old guy! If he does that I will be pissed and I will meet the old guy somewhere! Snap-On guy will be the same he will get come on a different day
Love the Flag behind them but it needs to be turned the other way with The union on the observers left side. Keep the awesome content up!!!!
He’s explained it in other videos. There’s a door behind him that it shows from the outside looking in. He can’t explain to those people why it would be displayed backwards but if people Come on the truck he can explain to them and pull it back so they can see the windshield. He can’t have it right both ways so ......
Koon Trucking awesome. So when he’s driving down the road they see it looking in. 🇺🇸🇺🇸
Dexter Hanson yes sir
lol i just got a brand new double 4s for 23$ a week. thats all you get ??? lol
I missed the part of how many weeks
Would a matco truck come by a residential location?
23 Dolla for the next ten years
That's what I was wondering. The tool guys are in business to make money. I'm glad there are many YT mechanics going "Please don't just look at the payment/week or month." If you don't have that "Old timer" around to warn you.
It's not that people are "just lazy" that a car's engine oil or transmission fluid can go low or to zero over time. People today just don't know they're supposed to check them at least once a week and keep up with fluid levels. Owner manuals have gotten so big and complicated that most people don't open them until they have to change a tire. It's not just 80 y.o. women, but people across all age groups that haven't been taught by their dads or had a course in basic auto maintenance (in high school or elsewhere) to know what to look for and how often. You're not expected to know as much as a mechanic and be able to fix it yourself, but you've got a piece of machinery that is the second most-expensive item (after a house) that you'll invest your hard-earned money in. You should at least know how to check fluid levels and take it to a service mechanic to perform needed work to make it last as long as possible. That's just simple economics and common sense.
@Koon Trucking have you seen the Milwaukee Pipeline video on the Milwaukee 1” D handle M18 Impact 2868-20
No I haven’t seen it
Great videos but if you could please get camera with image stabilization or get a gimbal the shaking get a little to much. Keep up the good work.
We will gladly accept the gimbal or a stabilized lens ..... My shipping address is in the description and I use Canon EF mount lens the 50mm is currently on sale at B&H Photo
I myself will miss Matco tool's had a dealer this time for 5 years at start of covid 19 he went out for safty never came back called any times he finaly said sold his truck out of businss , called outher dealer and he to busy for any new cutomers stops 2 builings down went down he said no more customers even if we came down so #donewiththiscrap . Also i am always paid ahead never behind , sent Matco email has been crickets no reply back so now have many thousands of Matco that will just be a loss as to NO SERVICE !
They call them IDIOT LIGHTS for a dam good reason.
Can u use a sharkbite connector on the fuel line ?
Is that serpentine belt kit a rebranded gear wrench product? Very curious.
Moore tools less talk....go!
Where was that deal when I started
What is the price on that serp kit?
How many weeks?
You can buy two ratchets and a socket set and your already at $1000 from Matco ask me how I know 🤦♂️
Haha
Now when you say 23 a week how many weeks is that.
Depends how much the box is and your credit.
The rest of your life......
Most people don't think like you and me. Yeah sure that's fine and dandy 23 bucks but what's that gonna be over my life? 5 years? 10 years? You might end up paying more than you woud if you would of just paid it right off, and you're stuck with payments for so long. Many things like that screw you over. Hell even going from monthly to yearly Car insurance payments they try to scam you out of like 500 600 700 bucks easy for paying monthly, yeah no thanks.
Til the day you die if you buy all your tools off the truck.😂
@Lord Raiden * a week
Why everyone talks bad things about matco tools at end tools are tools don't make your smart
Matco tools are great, anyone who says otherwise doesn’t use them. I do prefer my Snap-on ratchets though, they’re smoother.
My snap on dealer sales autel scanner and told me snap on going get lawsuit against autel because of copy software
Joe should go gearwrench
Already have a Gearwrench Dealer, he’s our OLD Matco dealer
Is the 23$ A week on truck credit?
Not brought Matco credit
Don’t understand! Lol. Sorry. New to all this!
Lol “yeah that’s retarded”
No ice Michael is definitely a cool cat.😎
Always love a video with a beautiful woman in it.
Now is he gonna run your credit bc if so that’s a huge rip off, in interest. On a credit account I bet that dude is charging clear over 20% interest especially as a kid starting off. Man dude is robbing them. Gonna take them 5 years to pay off the box and those “free tools.” You want a good deal. Wait till February when matco has another convention. Talk about a hell of a deal on the box side of things.
I'm missing something very important; is it $23/week for life, until the tools are paid off and in this case how much are we looking at, or what?
All depends on your credit
@@KoonTrucking That's a first one! So the price changes with the credit rating... I would assume it changes to being more expensive when you're in the shitter and it gets "cheaper" for the rich... Now I get to understand why all those losers "protest" against what they call "systemic racism", but it does not go after a specific race or color, it goes after the poor people. I might be wrong and the poorer you are, the cheaper they will sell it to you LOL! In any case, I don't even know if it's legal to sell this way, without disclosing a price and an APR. And back to my point; all these tool-truck companies do, is bring young and inexperienced people (not only) into slavery. Your replay actually confirms that. Stay safe and have a good one!
@@A.Dude. the total price would change according due the APR... And yes they have to legally disclose the APR and everything, but they don't know your apr til they run your credit.
@@chrisgeorge1362 That I will agree to, but the price needs to be disclosed regardless. The poor guy needs to know if he buys a hundred dollars worth or a gazillion dollar worth... This entire business in UN-ethical!
@@A.Dude. one of the required items on the disclosures of the financing agreement will be the principal (price) , interests charge, and the total amount financed
$23 a week for the rest of your life... and your kids lives too
Just wanting to be the first comment 🤣
Or go to harbor freight and buy a toolbox and all the tools you could need for $350 and you dont owe anybody sht lol a wrench is a wrench whether it made with the best german steel or in china, it will get the job done. These overpriced tools are for the guys that are retired and just want something perty to look at when they need a wrench to fix the wifes tv mount or for the guy that wants to feel like a pro mechanic without actually being able to back it up lol
I hate to tell you but a wrench is not just a wrench. And a socket isn’t just a socket or a ratchet isn’t a ratchet. Harbor freight doesn’t fit the fasteners as good because they are cheap made. Stripping bolts is not fun, there’s a huge difference in tools and the way they are made.
$23/wk for the rest of your life. 🤣
👍🇨🇦
1st