@SavingSalvage Last serviced 10th October 2023.@ 59,366 miles. Oil and filter, brake fluid, spark plugs, pollen filter, transfer case fluid. Main dealer Crawley. All others done same place, so full main dealer. Hope that helps.
@@SavingSalvagego on jaguar service history website enter the chassis number on the website and it will give you every bit of service this vehicle has ever had at main dealer or main dealer approved garage.
@@SavingSalvage According to the Topix software (exact same as main dealer) yes, just looked online tonight for you. If you need anything don't hesitate to ask Dean. Good luck with it.
@SavingSalvage - Dean, an episode deconstructing the knackered engine would be interesting to understand the damage the water caused? Good luck with the build!
Do people not realise Dean has so many cars on the go so he can upload content these cars take ages to get parts for that's why he has so many projects just enjoy the videos your favourite car will be bk soon 😁😁😁😁😁😁
What? Like a Corsa? Thats a ridiculous comment.. parts will always be tricky to come by unless its some kind of boring run of the mill rebuild, which I know ur not doing and haven't done for a long time Dean your smashing it, your videos are brilliant 😀
Dean, don't forget to do all the common failure items on the new-used engine before putting back in the car cause it's a pain later. Eg Y coolant pipe, oil cooler pipe to water pump & supercharger coupler! Good luck with the car, it's an awesome proj! If it gets done on time think about bidding on the 2023 corvette that's now on Copart.
Done a few flood Cars, I always drains oil the take plugs out flood cilinders with marvin mystry oil or another lube..... Then put new cheap oil and hook up good battery turn over car...... if you do it like your way you are pumping water in bottom of oil pan into main bearings...........not a good 😢idea
I agree with you brother this video was a cringe just absolutely everything not to do to a flood car especially since ur trying to sell it in online auction or w.e. these TH-camrs absolutely don't give fuck . Unless it's Sreten or LSC
I think you should do a strip down of the old engine to see exactly what the issue is, a good little video for people that are interested in that stuff. Madness u cant get parts for the engine either, another reason why insurance is so expensive.
@@rockyhudson you can’t check the oil unless you drain and refil.. also no reason it should have oil in. And you can crank an engine without oil in it.
I came to the comments for that reason........ For all he knew, the sump could have been full of water........ So possibly didn't need a new engine if he'd have drained the oil / water before going at it with a breaker bar and starter motor with no fuse protection.......
@@banditdarville. the engine just inhaled water, if the engine was physically full of water it would have been in a much bigger floor and therefore it would have been Cat B and not allowed back on the road
I came here from Mat Armstrong (found Mat from Freddy) and am now addicted to this channel. I'd like to see a rebuild of an older damaged Mercedes CLS 350 - it must be one of the most beautiful quick, large but practical cars around. I always wanted one and they've finally dropped into my bracket. I'd love to see what you made of one.
Best looking car of the last few years without doubt, one of these is in my dream garage for sure which is odd because my dream garage is full of older stuff, Fords mainly lol
I've had an XF with this engine in for the last 6 years, they are incredible when they work... I'm extremely envious of how accessible the rear coolant bridge is in the Ftype as in the XF it's almost under the dashboard! Like any Ford or BMW, assume all the black plastic coolant parts are cracked. One of them will be.
Your lucky if you get it going, I bought a flood damaged 2019 SLC, I don't have a Ramp tried turning on the crank seized solid, put a cheap Amazon camera down the bores loads of corrosion and water, in the end I did a simple test, got a long BBQ skewer, put it down the 4 bores and it went in further in one bore more than the others which told me the conrod was bent, took the engine apart piston number one Conrod was bent like a banana still in the middle of rebuilding the engine, I wanted to save it as it's only done 15,000 miles
Dean…you are a brave man taking on so many jobs and all at the same time…you must keep each set of bits in different containers to stop them getting jumbled up! On the car, yes the engine is scrap but the body shut lines looked a bit random at the front as if the owner had powered into a flood at a fair speed and the water had pushed all the front valance and grille slightly backwards. When the engine is out,give everything a good check and see if it all aligns properly…you need a full respray going by your inspection so the repair margins are financially very close.😬😬Good luck! 😃😃😃😃😃
I have just rebuilt a Discovery Sport ingenium that took in water, it had bent a rod so bad the piston was wedged onto the crank which made it feel like it was seized, second hand rod, rings, bearings and chains and it's running great.
I was looked after by JLR when the F-Type was launched, and I got a drive in it around an old RAF base. This is my “achievable dream” car, without a doubt.
You know what Dean you have to be one of the best car repairs on TH-cam to date there is never a dull moment in any of your videos. I’ve literally been sat on the edge of my chair enjoying this and the,n as I’m into it you end it till the next one gutted, but bring on the next one mate and thank you for sharing it all with us…… great Contant Dean also what I like is nothing seems to phase you. You just get on with it,,, as cool as a cucumber😅😅😅😅
That's the last ford V8 that was made when Jag was owned by ford. I used to work for a company that used those engines to age catalysts for JLR. They used to drop valves all the time and they were hard to come by new in 2019 -20. We had to use recon ones once ford stopped supporting JAG. So not surprised you couldn't get bits 😂
It's the AJ-V8 Gen 3, based on the same AJ series V8 that was designed by Jaguar, it's not a Ford engine, although Ford used the second Gen AJ 4.0 in the LS and Thunderbird.
Great car Dean, please remember the air boxes they must be full of water. I'm sure you did it off camera. Don't want a repeat on the new engine. Keep up the good work
That horrible rattle sounds like small end bearings. It quite possible someone started the engine with some cylinders full of water, which hydro-locked it. The engine was running on all cylinders so expect still enough compression left to run the damaged cylinders. The hydraulic lifters may also have been badly damaged. Without testing for oil pressure and compression test each cylinder, it’s difficult to be certain. It didn’t sound like big end bearings though, so could be a potential fix for someone. The engine was very tight at first due to the rust buildup on the cylinder walls where the water was still present-hence the explosion of rusty water when you cranked it over with the plugs out. A fun engine rebuild for someone !.
Great content, keep up the good work fella 👍 The SVR has many differences to a standard R hence their much elevated prices when new. Different suspension set up, flat floor, titanium and inconel exhaust system, different front intake and side aero,.seats are specific to SVR's and thinner/lighter than standard, plus other little tweaks. They are also holding their used values incredibly well. Mine has increased in value since I purchased it earlier this year. They are an incredible vehicle.
Braver than me Dean , I did a Maserati Gransport a few years back hydrolock , was a bent conrod in the end , but i would have drained and re filled the oil first , and then use an endiscope to check the bores and valves , as it could of been a bent valve , a lot easier
Having had 2 SVRs the first being a 67 plate, I can tell you that there is a host of of differences to the FType R, although I’m not sure how close the R becalm once the SVR was dropped. Front splitter and rear diffuser I believe are different, exhausts are inconel and titanium and much lighter. Suspension is different to the R. Interior wise; branding and seats. Rear spoilers were all carbon fibre. I fantastic car which with carbon ceramics and hence different wheels looks stunning. The pre Sept 18 cars sounded awesome. I didn’t want to get ride of my last one, a 19 plater, it had 13k miles and was just short of five years old. But I did buy a 992 TS which, sadly, sounds like a sowing machine. Bring back my supercharged V8.
The svr is a beast , change the charger pulleys while out get a remap bit more power ! Love the content wish I could come help for a few days lol ! Can't wait to see it running again !
You are one brave and clever person can’t say man anymore can we glad I retired from the garage trade modern car’s very complicated love your videos very entertaining thank you
Dean js my favourite on TH-cam. He just gets better on a weekly basis. Drawn to this channel mainly cos vw audi group stuff .but it seams its the others that doesn't take him long to learn. Top bloke top channel top content. ❤😮😮
It’s mint how nothing really seems to phase you. My head would have come off at the prospect of finding an engine, fitting it and the worry of it running well. Fair play Dean you got some skills and stones my man.
There was a moment when I looked at it and thought… I’ve never worked on a jag in my life and the first thing I’m doing is dropping the engine and box out of a 5.0 SVR 😂
Dean, love your videos and your way to present stuff (more than Mark's to be honest) But I think simple things as lighting are bringing them down. Please invest in better lights for the camera. We can't see very well when you get under the car. The mess around also looks bad, but I understand car take much much more space in pieces than once finished.
Just checked and it's got full jaguar service history 👍 if you want to drop me a message I can give you a link so you can check all jaguar and landrover service history online 👍 Last service was Oct 2023 at 59k miles, had all oils and filters along with spark plugs and transfer case service
The problem with flood damaged is to do the repair correctly and not have numerous wierd faults a few years down the line. All wiring and electrical items at least under the bonnet (if only driven in deep water and not gone inside) need replacing.. else it will all look like your starter wiring.. and that sounds is text book bent rod.
Fun fact, all of this era of JLR products have 8 cylinders. It is just a question of how many pistons they have. To reduce production costs, the v6 and the v8 use the same block. The “V6” version uses the cylinder heads from an inline 3 Ford engine on each side.
That's the mega fuse not a pyro fuse though, that will have blown due to the water in the cylinder causing the starter to draw too much current I'd imagine.
you should watch Chris Slix rebuild of an SVR.... parts are pretty tough to find as they were so limited! looking forward to this rebuild, would look good on my drive!
I love your choice of cars. Just bought my SVR tickets. Do you plan to change the clutch on the replacement engine? Not that I’m encouraging you to do anymore work than you already do. Superb channel and keep up the great work.
Fyi it's not the insurer that sets the reserve, it's copart. I used to send the cars to copart from a major uk insurer. Copart just pays a set % of the vehicle value depending on cat to the insurer. So its copart you're arguing with on the value side, its how they make money after all (plus fees)
That almost horizontal radiator at the front is the cooling radiator for the charge cooling system. As always, you're a brave man Dean lol, hope it all goes well for you.
Great car, love these Jaguars. Unfortunately I cant join the lottery because I am from the Netherlands. It looks difficult to work on, but if anyone can its you Dean ! Looking forward to the next video.
I sooooo need to win this car, I’ve dreamed of owning an f-type since they launched. Looking forward to see how it develops. Tickets brought, I’m all in
Dean LEXUS LFA Something different that hasn’t been done on TH-cam yet I don’t think and such a awesome sounding car too if that car is possible to get and if you can get it for the right price because it won’t be cheap haha keep up the good videos 👌
The smartest thing that should be on everyone's mind right now should be to invest in different streams of income that are not dependent on the government. Especially with the current economic crisis around the world. This is still a good time to invest in gold, silver, and digital currencies (BTC ETH...)
After I raised up to 325k trading with her I bought a new House and a car here in the states a also paid for my son's surgery (Oscar). Glory to God.shalom..
21:30 last time I heard knocking like that was after I'd hydrolocked at 70Mph overtaking an HGV is torrential rain in a modified Mk2 Golf Gti. The hole that con rod smashed in the block could fit my fist in......🤣🤣🤣
Crank the engine by hand by all means but your asking for trouble turning it backwards, the timing chain/belt and associated guides/tensioners are designed to go one way only.
Having had the same noise on another v8 it sounds like a bent valve that is stuck open and the piston is hitting it, check with boroscope and you may see witness marks on the piston
The 508PS on the engine code means 5 litre, 8 cylinder, petrol supercharged. Not that its got 508PS lol. These are cracking cars, still one of my favourites from my time at dealer
Win the SVR here: competeforcars.co.uk/product/jaguar-f-type-5-0-svr-2018/
full history
@@MrBLANNY1 🤣🤣🤣🤣 You know he bent that conrod by trying to start it don't ya
@SavingSalvage Last serviced 10th October 2023.@ 59,366 miles. Oil and filter, brake fluid, spark plugs, pollen filter, transfer case fluid. Main dealer Crawley. All others done same place, so full main dealer. Hope that helps.
And that’s why I bought it! Thankyou mate, really appreciate it! So did less than a 1000 miles 😬
What a guy
@@SavingSalvagego on jaguar service history website enter the chassis number on the website and it will give you every bit of service this vehicle has ever had at main dealer or main dealer approved garage.
@@SavingSalvage According to the Topix software (exact same as main dealer) yes, just looked online tonight for you. If you need anything don't hesitate to ask Dean. Good luck with it.
On the engine that's scrap .. least you know it's got main dealer brake pads 😂
@SavingSalvage - Dean, an episode deconstructing the knackered engine would be interesting to understand the damage the water caused?
Good luck with the build!
Definitely 👍
on my lambo block it damaged the cylinder walls.
Do people not realise Dean has so many cars on the go so he can upload content these cars take ages to get parts for that's why he has so many projects just enjoy the videos your favourite car will be bk soon 😁😁😁😁😁😁
Absolutely ❤
Yup.
Or maybe buy cars that aren't hard to get parts for 😂
What? Like a Corsa? Thats a ridiculous comment..
parts will always be tricky to come by unless its some kind of boring run of the mill rebuild, which I know ur not doing and haven't done for a long time
Dean your smashing it, your videos are brilliant 😀
Peugeot 205
Dean, don't forget to do all the common failure items on the new-used engine before putting back in the car cause it's a pain later. Eg Y coolant pipe, oil cooler pipe to water pump & supercharger coupler!
Good luck with the car, it's an awesome proj!
If it gets done on time think about bidding on the 2023 corvette that's now on Copart.
Done a few flood Cars, I always drains oil the take plugs out flood cilinders with marvin mystry oil or another lube..... Then put new cheap oil and hook up good battery turn over car...... if you do it like your way you are pumping water in bottom of oil pan into main bearings...........not a good 😢idea
I agree with you brother this video was a cringe just absolutely everything not to do to a flood car especially since ur trying to sell it in online auction or w.e. these TH-camrs absolutely don't give fuck . Unless it's Sreten or LSC
I think you should do a strip down of the old engine to see exactly what the issue is, a good little video for people that are interested in that stuff. Madness u cant get parts for the engine either, another reason why insurance is so expensive.
I agree, it would be very interesting to see what happened for future reference 😊
Its bolloxed..dont bother..bent pistons.
Great job Dean . Don't forget to check airboxs for any water still in
I would have through step 1 would have been drain oil, then pull plugs and turn by hand.
Same why didn't he check the oil before starting it?
@@rockyhudson you can’t check the oil unless you drain and refil.. also no reason it should have oil in. And you can crank an engine without oil in it.
I came to the comments for that reason........ For all he knew, the sump could have been full of water........ So possibly didn't need a new engine if he'd have drained the oil / water before going at it with a breaker bar and starter motor with no fuse protection.......
@@banditdarville. the engine just inhaled water, if the engine was physically full of water it would have been in a much bigger floor and therefore it would have been Cat B and not allowed back on the road
They ad on buyers fees. I say never.
The F Type is a stunning looking car. Love the styling. 👍
Yeah pity it’s just a ford 🙄🙄
@@JayKehoe in what way?
As far as I’m aware the older jaguars had a mondeo chassis and running gear
@@chrisblay In the same way that a Lamborghini is just an Audi and a Ferrari is just a Fiat.
@@minimoog4236 paying for the fancy badge.!!
I would like Bmw M5 on the channel 😅
I would love to see something a bloke can buy and fix in a shed with no 30k to spare..
I worked at JLR Crawley for 18 years, I’m sure this was a regular customer, fairly sure it has a good history
Yeah correct full history from Crawley 🙌🏼
Love the content despite not having a mechanical bone in my body. Its educational on many levels
I came here from Mat Armstrong (found Mat from Freddy) and am now addicted to this channel. I'd like to see a rebuild of an older damaged Mercedes CLS 350 - it must be one of the most beautiful quick, large but practical cars around. I always wanted one and they've finally dropped into my bracket. I'd love to see what you made of one.
Best looking car of the last few years without doubt, one of these is in my dream garage for sure which is odd because my dream garage is full of older stuff, Fords mainly lol
Nice 😍 I love the F type too 👍 your garage sounds cool.
I am building my dream V12 supercar with the OG zonda engine 😎
"I'm not going to enter a battle with myself!" 😂😂😂 Priceless 👍
I've had an XF with this engine in for the last 6 years, they are incredible when they work... I'm extremely envious of how accessible the rear coolant bridge is in the Ftype as in the XF it's almost under the dashboard! Like any Ford or BMW, assume all the black plastic coolant parts are cracked. One of them will be.
Your lucky if you get it going, I bought a flood damaged 2019 SLC, I don't have a Ramp tried turning on the crank seized solid, put a cheap Amazon camera down the bores loads of corrosion and water, in the end I did a simple test, got a long BBQ skewer, put it down the 4 bores and it went in further in one bore more than the others which told me the conrod was bent, took the engine apart piston number one Conrod was bent like a banana still in the middle of rebuilding the engine, I wanted to save it as it's only done 15,000 miles
I would like to see an SQ7 or an RS6🙌
I don’t know how you repair all these cars on your own - amazing. Love the channel. Thanks for all the hours of great content 👍👍
Thanks for watching!
@@SavingSalvage watching is the easy bit. You are the one doing all the hard work. Cheers for the reply - much appreciated 👍
Dean…you are a brave man taking on so many jobs and all at the same time…you must keep each set of bits in different containers to stop them getting jumbled up! On the car, yes the engine is scrap but the body shut lines looked a bit random at the front as if the owner had powered into a flood at a fair speed and the water had pushed all the front valance and grille slightly backwards. When the engine is out,give everything a good check and see if it all aligns properly…you need a full respray going by your inspection so the repair margins are financially very close.😬😬Good luck! 😃😃😃😃😃
I have just rebuilt a Discovery Sport ingenium that took in water, it had bent a rod so bad the piston was wedged onto the crank which made it feel like it was seized, second hand rod, rings, bearings and chains and it's running great.
Loving this one Dean, love these SVR F types!
I like the F type too 🙂
I was looked after by JLR when the F-Type was launched, and I got a drive in it around an old RAF base. This is my “achievable dream” car, without a doubt.
You know what Dean you have to be one of the best car repairs on TH-cam to date there is never a dull moment in any of your videos. I’ve literally been sat on the edge of my chair enjoying this and the,n as I’m into it you end it till the next one gutted, but bring on the next one mate and thank you for sharing it all with us…… great Contant Dean also what I like is nothing seems to phase you. You just get on with it,,, as cool as a cucumber😅😅😅😅
Thanks 😊
That's the last ford V8 that was made when Jag was owned by ford. I used to work for a company that used those engines to age catalysts for JLR. They used to drop valves all the time and they were hard to come by new in 2019 -20. We had to use recon ones once ford stopped supporting JAG. So not surprised you couldn't get bits 😂
It's the AJ-V8 Gen 3, based on the same AJ series V8 that was designed by Jaguar, it's not a Ford engine, although Ford used the second Gen AJ 4.0 in the LS and Thunderbird.
@jamesgeorge4874 Not a Ford engine as such, but some FoMoCo parts and built at Ford Bridgend Engine Plant.
That's a good price to be fair considering you can do the work yourself looking forward to this build
Yes it is the car you have, reg near Brighton in 2017 and registered as a Jaguar F Type V8 SVR AWD AUTO. Hope that helps mate
I had a Scirocco MK2. Miss that car. Even though they are old now would love to see one rebuilt. Would love to see a 4wd conversion
Great car Dean, please remember the air boxes they must be full of water.
I'm sure you did it off camera. Don't want a repeat on the new engine.
Keep up the good work
Would be interesting to see a Kia Stinger GTS on the channel.. little different
Yeah agree. Nice refreshing change from loads of channels all constantly doing the same BMW's, Audis and Volkswagen
Dean you are a car rebuilding machine! The amount of projects you have going at any given time is crazy especially with that lambo too!
That horrible rattle sounds like small end bearings. It quite possible someone started the engine with some cylinders full of water, which hydro-locked it. The engine was running on all cylinders so expect still enough compression left to run the damaged cylinders. The hydraulic lifters may also have been badly damaged. Without testing for oil pressure and compression test each cylinder, it’s difficult to be certain. It didn’t sound like big end bearings though, so could be a potential fix for someone. The engine was very tight at first due to the rust buildup on the cylinder walls where the water was still present-hence the explosion of rusty water when you cranked it over with the plugs out. A fun engine rebuild for someone !.
Great content, keep up the good work fella 👍
The SVR has many differences to a standard R hence their much elevated prices when new.
Different suspension set up, flat floor, titanium and inconel exhaust system, different front intake and side aero,.seats are specific to SVR's and thinner/lighter than standard, plus other little tweaks.
They are also holding their used values incredibly well.
Mine has increased in value since I purchased it earlier this year.
They are an incredible vehicle.
Thanks! 👍
These Jags are absolutely gorgeous! Looking so forward to this build Dean! Just watching the video now but thought I would comment anyway!
Change the coolant pipes if they are the original ones as they are prone to failure. Good luck! 😊
Good on you for not being bullied by the insurance company. All the best for the rest of the build 🥳
Braver than me Dean , I did a Maserati Gransport a few years back hydrolock , was a bent conrod in the end , but i would have drained and re filled the oil first , and then use an endiscope to check the bores and valves , as it could of been a bent valve , a lot easier
Having had 2 SVRs the first being a 67 plate, I can tell you that there is a host of of differences to the FType R, although I’m not sure how close the R becalm once the SVR was dropped. Front splitter and rear diffuser I believe are different, exhausts are inconel and titanium and much lighter. Suspension is different to the R. Interior wise; branding and seats. Rear spoilers were all carbon fibre. I fantastic car which with carbon ceramics and hence different wheels looks stunning. The pre Sept 18 cars sounded awesome. I didn’t want to get ride of my last one, a 19 plater, it had 13k miles and was just short of five years old. But I did buy a 992 TS which, sadly, sounds like a sowing machine. Bring back my supercharged V8.
The svr is a beast , change the charger pulleys while out get a remap bit more power ! Love the content wish I could come help for a few days lol ! Can't wait to see it running again !
Dean is an inspiration love the commitment he puts into the builds keep up the good work 👍👍👍👍
Thanks 👍
Top chops, Dean: nice to see that F type being given a chance - like you say, someone has looked after it.
Nice one Dean, it's a lovely car. Look forward to hearing it start up post-engine swap!
You are one brave and clever person can’t say man anymore can we glad I retired from the garage trade modern car’s very complicated love your videos very entertaining thank you
Never purchased tickets before but I love your channel Dean. Just grabbed a few and love the content. Cheers.
Awesome, thank you!
Love the look and sound of these!
As an Aussie watching I can't help but notice that the Jag has a very Aston Martin DB9 body shape.
Ian Callum designed both
@@MikeTimbers fisker designed the DB9
@@jase6370fisker with callum
Would love to see an Alfa Giulia on the channel dean. ❤
Oooh - yes - great idea 👍
Great suggestion
Check Chris Slix out. He's doing one of those I think
@@benjamtaylor6179 Thanks for that 👍
Alfa will have to many problems
Dean js my favourite on TH-cam. He just gets better on a weekly basis. Drawn to this channel mainly cos vw audi group stuff .but it seams its the others that doesn't take him long to learn. Top bloke top channel top content. ❤😮😮
Thank you mate 😊
Great video on my favourite car, I hope it goes easy looking forward to the next one Dean.
It’s mint how nothing really seems to phase you. My head would have come off at the prospect of finding an engine, fitting it and the worry of it running well. Fair play Dean you got some skills and stones my man.
There was a moment when I looked at it and thought… I’ve never worked on a jag in my life and the first thing I’m doing is dropping the engine and box out of a 5.0 SVR 😂
@SavingSalvage you can do it, one step at a time. Going to be interesting.
Great content Dean, I love to watch you porking about with high end motors. Bought my ticket! 🏎️
Dean, love your videos and your way to present stuff (more than Mark's to be honest) But I think simple things as lighting are bringing them down. Please invest in better lights for the camera. We can't see very well when you get under the car. The mess around also looks bad, but I understand car take much much more space in pieces than once finished.
Thanks for the tips!
Brave man, Dean. Love this content. Cheers.
Just checked and it's got full jaguar service history 👍 if you want to drop me a message I can give you a link so you can check all jaguar and landrover service history online 👍
Last service was Oct 2023 at 59k miles, had all oils and filters along with spark plugs and transfer case service
Doesn't matter now though with a new engine
Love this already, please put on Compete for Cars when it's done ! Too soon ? come on it will be fine and easy fix........
Great video! All the best with it, look forward to the follow up vid. "Thanks for sharing" 👍
The problem with flood damaged is to do the repair correctly and not have numerous wierd faults a few years down the line. All wiring and electrical items at least under the bonnet (if only driven in deep water and not gone inside) need replacing.. else it will all look like your starter wiring.. and that sounds is text book bent rod.
like the project work on so many different cars. always a variety.
Fun fact, all of this era of JLR products have 8 cylinders. It is just a question of how many pistons they have. To reduce production costs, the v6 and the v8 use the same block. The “V6” version uses the cylinder heads from an inline 3 Ford engine on each side.
I love this car, even the entry level one. I love it the same way I loved a Chrysler crossfire back in 2008.
Remember building those engines! Uk made at Ford Engine Plant in Bridgend, great times with plenty overtime haha
Way let’s go like that you are getting into the flood stuff mate
great vid dean love the f type cool build
That's the quickest ticket I've ever bought from you - 10 minutes into your video 😂. Lets hope its the lucky one 🤞
good luck to all that buy tickets
Dean you make it look easy well-done
Cant be the only one screaming pyro fuse, well done, mate
Wasn’t in a crash so should be fine 😅
That's the mega fuse not a pyro fuse though, that will have blown due to the water in the cylinder causing the starter to draw too much current I'd imagine.
Sounded like the diesel mixer on site cracking up
Just say it’s a diesel motor ….then everyone sweet 💪
OMG, I couldn't listen to that. Horrific
Jlr service history is downloadable from the website you just need the vin 👍
Very good looking car, beautiful in white.
Sounds fine... for a PD diesel
Not usually a fan of Jaaaaags but this is a stunner
you should watch Chris Slix rebuild of an SVR.... parts are pretty tough to find as they were so limited! looking forward to this rebuild, would look good on my drive!
I love your choice of cars. Just bought my SVR tickets. Do you plan to change the clutch on the replacement engine? Not that I’m encouraging you to do anymore work than you already do. Superb channel and keep up the great work.
Do the e tron. It’s fun learning something new and not giving up
These are more fun than the crashed ones to watch. I used to watch all the creators but started to get bored of them. Only really watch yours now
Great video, crazy that you can't buy pistons and con rods separate
Evo x fq360, hks engine built by hks as the test bed for the fq400, non bloody runner as it’s mine haha, good luck mate, love your vids
lifted on forks on rear to avoid park brake. probably a quick shunt about
Fyi it's not the insurer that sets the reserve, it's copart. I used to send the cars to copart from a major uk insurer. Copart just pays a set % of the vehicle value depending on cat to the insurer. So its copart you're arguing with on the value side, its how they make money after all (plus fees)
Will you do a post-mortem on the old engine after you have the new one in it?
So close yet so far. I mean, it did run. Nice work so far
That almost horizontal radiator at the front is the cooling radiator for the charge cooling system. As always, you're a brave man Dean lol, hope it all goes well for you.
Thanks 👍
I think you need to go old and get a VW camper... Ideally a series 1 split screen but if not a bay window series 2... Thoughts?
Water on piston will bend con rods usually as cannot compress water.good luck.
Great car, love these Jaguars. Unfortunately I cant join the lottery because I am from the Netherlands. It looks difficult to work on, but if anyone can its you Dean ! Looking forward to the next video.
Sorry to hear that
I sooooo need to win this car, I’ve dreamed of owning an f-type since they launched. Looking forward to see how it develops. Tickets brought, I’m all in
ASM are a fantastic breakers, very professional!
Yes they are!
Dean LEXUS LFA Something different that hasn’t been done on TH-cam yet I don’t think and such a awesome sounding car too if that car is possible to get and if you can get it for the right price because it won’t be cheap haha keep up the good videos 👌
The smartest thing that should be on everyone's mind right now should be to invest in different streams of income that are not dependent on the government. Especially with the current economic crisis around the world.
This is still a good time to invest in gold, silver, and digital currencies (BTC ETH...)
How
.? Am a newbie in crypto investment, please can you guide me through on how you made profit?
A lot of people still make massive profit from the crypto market, all you really need is a relevant information and some professional advice.
No I don't trade on my own anymore always required help and assistance
From my personal financial advisor
After I raised up to 325k trading with her I bought a new House and a car here in the states a also paid for my son's surgery (Oscar). Glory to God.shalom..
21:30 last time I heard knocking like that was after I'd hydrolocked at 70Mph overtaking an HGV is torrential rain in a modified Mk2 Golf Gti. The hole that con rod smashed in the block could fit my fist in......🤣🤣🤣
Dean please do a video stripping that engine to see the damage caused
Crank the engine by hand by all means but your asking for trouble turning it backwards, the timing chain/belt and associated guides/tensioners are designed to go one way only.
Love to see you restore an old Toyota Celica Gt4
I'd love one of these, really great looking car
This is such a nice car Dean. Just bought 10 tickets so fingers crossed
Having had the same noise on another v8 it sounds like a bent valve that is stuck open and the piston is hitting it, check with boroscope and you may see witness marks on the piston
The 508PS on the engine code means 5 litre, 8 cylinder, petrol supercharged. Not that its got 508PS lol. These are cracking cars, still one of my favourites from my time at dealer
Well that’s not at all misleading 😂
Haven’t seen anyone do a GR Yaris yet. Think that would do quite well. I’d definitely get a ticket if you put it up for raffle!
I would like to see u rebuild a Honda civic ep3 type r 👍🏻