ฝัง
- เผยแพร่เมื่อ 11 ก.ค. 2024
- In this video, we will demonstrate how to set parameters for the Lumitoolf20 laser marking machine.
00.03 1. Adjust the focal length first and then set the parameters.
00.14 2. Set Fill 1/Fill 2/Fill spacing/Fill angle
00.45 3. Reverse/Reverse blank
1.03 4. Trans angel/Fill direction/KeepOutline and FirstOutline effects/Three Fill Directions
1.38 5. Offset X/Offset Y/Width and height settings
2.07 6. Speed and power test
2.54 7. Switch delay/Light off delay/Jump delay/Jump speed
4.01 8. Area (fill in according to the selected field lens size)
Duty Ratio/ Frequency/ External trigger/ MinPower(Default value does not need to be modified)
4.07 9. Rotate parameters
Open rotary marking/Product diameter/Motor subdivision/Gearspeed
4.50 10.Correction parameters
TurnXY/TurnX/TurnY
(Under normal circumstances, TurnXY/TurnX/TurnY do not need to be turned on)
Pincushion/Trapezoid/Paral/Ratio
(default does not need to be modified)
Restore default
🔥Come to our web to see more!
lumitool.net/
#laserengravingmachine#fiber#laser#fiberlaser#lumitool#lumitoolf20#diy #diyprojects #lasercutting#lasermachine #laserengraving
#lasercut#lasermarkingmachine#lasermarking#laserprinter#laserengraver#fiberlasermarkingmachine#fiberlasermachine#fiberlasercutting #fiberlaser #laserprintingmachine#lasermark #laserprint#fiberlasermachines#laserengrave #laserart#fiberlasercut#fiberlasermarker#engraved#laserengravingbusiness#fiberlasermark#lasermetal#laserdiy#engravingbusiness#engravingmetal#lasercutart#diymachine#diymetal#diyprojectsideas#fiberlaserprinter#diycraft#diyproject#diybusiness
Merci pour cette vidéo qui explique
My preview is just a square not the outline of the object
@@allthehobbiesbrady If it is a bitmap, it will be a box. The one used in the video is a vector map.
@LumiTool-Official is there a way to get that preview before the cut so we can get a more precise placement on material?