How Bypass The Video Restriction On A Pioneer Radio!
ฝัง
- เผยแพร่เมื่อ 22 ก.ย. 2024
- Parts linked in the description below!
Watch a tutorial bypassing the video restriction while in motion. The bypass used is compatible with radios that require a double pulse negative on the parking brake wire. Brands are Pioneer, Alpine, Clarion, Jensen, etc.
To purchase this relay, click here (eBay Partner Paid Links):
ebay.us/RVf61w
Disclosure: As an eBay Partner I earn from qualifying purchases
For the Alpine version of this video, click here:
• How To Bypass Parking ...
For an older version of this video, click here:
• How to Bypass the Pion...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts linked in the description!
It gives me a dead link 😞 you have a new link? Thanks
@@ProvoBeastAudio that link is dead as well.
@@TheTedSeeley ebay.us/RVf61w
Seriously man thank you. Nobody else was as clear as you were. Helped me a lot on the part I was confused
Finally got mine to work with this video. I had installed the three wire bypass and it did not work. If I went faster than 5mph, the video shut off with warning. This fix is what worked.
Your video is Soo much better than others I've seen. THANK YOU
This is exactly what I needed to see thanks you.
I purchased one of these and wired it exactly like you show but for some reason the ok button doesn't illuminate for me to get past it
I give lots of thanks to people like you, If it weren't for you and people on phones I wouldn't make money.
Best explanations on TH-cam
Subscribe!
Best video I've found explain this so far. Thank you.
I just installed, it works. The halo does not have footbrake wire so only connect the GND, PARKING BRAKE and REMOTE TURN ON wires to the bypass device.
Thanks for taking the time to actually show us the model number of that module
Where can I get that wire harness for the parking break bypass
So basically the green goes with the light green and that’s it? It doesnt go with anything else like the ground (black) and power (blue) ?
I have two questions if you don't mind. The black wire on the radio harness should go to the vehicle black harness and not to the chassis, right? Second, I used a relay and im getting a popping sound in my speaker when I switch off the ignition. Any ideas? Should I put the ground wire from the new radio harness to the ground wire on the stock harness?
What if I have a subwoofer. Do I connect all 4 blue ones together.
Bump
I know it's an old comment, but I ended up twist pairing the blue turn-on wire from the bypass kit with the head units blue turn on wire and crimped them together with a butt connector on one end. The other end goes to my 4 channel amp which is also paired to another remote wire daisy chaining to my mono amp. I just installed this today and it was working without issues as far as I can tell.
Radio: Pioneer DMH 1500nex
Amp: infinity reference 3004a & reference 6001a
Hope this helps
Hey buddy, please can you explain to me how could I connect bypass light green to my Kia Optima 2012? Thanks
Great vid
For the blue wire on the bypass. Can you connect that to the system remote control, blue wire for an aftermarket amp and do you also need to connect it to the harness?
Awesome video. Just subbed. But 1 question I had is the grounds would connect to factory harness but the blue would not unless you were hooking up an amp right?
Will this work with any aftermarket double din?
This is the info I needed. Thanks
bought one of these from Chinky land , my wiring does not have a blue and white lead ? tried connecting it to a live feed but no luck
Not working for me. The black and green are connected per this video. However I connected the blue wire directly to the head unit (blue/white) ONLY and not also to the factory harness. My vehicle does not have a power antenna and my amp is has auto turn-on sensing (so no need to connect a remote wire). If connecting the blue as described above is fine, then I an thinking it may be a bad microbypass?
P.S. I did purchase on ebay (w/ free shipping) since no longer on amazon.
I have a dmh-4660nex installed bypass as soon as I drive the screen goes black and message comes out?. Any suggestions? Thank you.
I have a AVH 120 bt I connected black to black, green to parking break but have a white wire instead and that’s connect to the blue and white but it still isn’t working?
Hello I just pick this up I wired up to my pioneer avh241 ex it won’t work
Do I have to ground it to a different ground instead of the factory wiring ?
Thank you
Awesome! Straight to the point💪
So if the solid Blue wire from the Vehicle wire is also connected to the Blue White wire do i need to just disconnect that wire?
What they doesn't tell you is that this mod may cause your brake light to always on on the dash.
Sounds like a wiring error. The Pioneer harness blue/white connects to the pulser Blue wire, the Pioneer harness Light Green wire connects to the pulser Brown wire, the Pioneer harness Black connects to pulser Black wire. There are NO connections to the car harness at all other than the common ground Black wire.
having a problem with my Pioneer DMH-220EX
I cant get the video to by pass when i hook up the wires the way you have them in the video.
i played around and was able to get the phone app on the radio to open and let me use it when driving but unless i ground the green on off on it will not work. im going to mess around with it again another day. but for now i can use the phone options. i dont really plan on watching movies on it.
Where can I get that for kenwood 8909
Hey guys. Just to confirm, the blue and blue/white wires need to be also spliced in to the Metra harness blue wire? The instructions provided with the bypass make no mention of that and only states to connect the three wires to the three wires on the pioneer harness. However I have now seen your video and a couple of others and you all connect those two to the third blue wire.
Yes, thats correct. Since it requires ground, you will need to splice into the ground wire. Same goes for the blue wire, this will need to be spliced into the blue / white wire of the radio in addition to the other wires needed to be connected by the adapter car harness.
Best regards, I would like to ask you ..
Can you use some scenes of this video to indicate the mounting connections in my video? thanks.
I literally found this video AFTER ordering the Alpine version. I thought the microbypass cables were universal, are they not?
Thanks bro..got it working now.
Awesome video got mine to work on my AVH-120bt
My avh291BT doesn’t have a green park brake wire, there’s a pink one that I have no idea what it’s for, which slot is the parking brake plugged into on the connection end? Picture ?
I have a solid green and a solid blue left over on the Harness factory wiring side... Is that normal?
Is it possible the radio not working on 9250 because all i need is bypass?
I had to ground both green wires. The bypass and the one from the head unit.
I did this for my pioneer radio, but some of my Bluetooth functions are still greyed out. What is my issue? I’ve been at it for hours but wiring is not at all my strong suit and now I’m just getting frustrated.
My emergency brake light won't turn off while I'm driving. Any ideas?
Thanks for the video! I have a cpl questions. I recently purchased a Pioneer DMH-1770NEX. My goal is be able to view both either the backup camera or video while in motion. Not both at the same time obviously, but just to be able to view either one while moving. Is it possible to override any restrictions for either with a setup that would allow me to do this? If so, how would one do it? Thanks again!
Thanks nice and clear explanation I got mine done thonbs up
how about when using a car model specific plug and play harness with swc etc.
Would this work if you have an amp also hooked up to the remote wire?
Yep!
I can't find that bypass harness on amazon, can you help me please?
It's not available on amazon, but it's linked in the description to ebay.
Why don't you start by telling us WHAT IS a video restriction? Does this mean the radio won't play a video at all, or just when the vehicle is in motion? Do brands other than Pioneer have such a feature? Can their restrictions similarly be bypassed?
Do T Taps work when connecting the bypass to the wires?
Bull I tried that 5 different ways and still didn't work
Hey thanks for postings. Used your other video demo to replace my blown sub in my 4runner. Putting in a Sony headhunt. Will this work? Also does the bypass work with iPhone mirroring videos while in motion? I feel like I see most people doing this of units with DVD players. Thanks!
My pioneer 211 ax is all connected but the screen doesn’t stay on after I start the car. How can I solve this problem?
Hey, what about pre amps? I just got 2330nex and I have no idea how to get preams, what connectors do i need?
Would this work on a the dual dmcp70 stereo?
I have an MVH-1400NEX.... it has no DVD receiver. Do I still need to bypass?
if you watch video via AV input or via USB, then yes.
Threw me off when he said "I'm a crip guy" lol
meanwhile im flashing my signs in the background...
@@ProvoBeastAudio stacc on em
Will this work with Pioneer dmh c5500nex?
Will it bypass the Bluetooth problem too?
I have a pioneer dmh1500 nex HU. I’m installing it in a Honda Accord, so I needed to get the idatalink harness too. How do I incorporate the bypass in the install?
Just don't use the parking brake wire produced by the idatalink maestro, and instead connect the radio's parking brake to your bypass. Black to ground, and blue / white to your radio's blue white wire.
Or you could just hook the green wire up to hey ground on the vehicle chassis and it does the same thing without having to buy anything
Not for Pioneer, as they require a double or triple pulse negative to operate. Don't believe me? Just ground the wire and see it not operate correctly.
@@ProvoBeastAudio fot it to work you need to put and on and off switch on the green cable from de radio to the bypass wen you have it connected if it dont work turn on and off the switch very fast that how i did my car work perfect
Hello! I have a Pioneer PVH-4638zt for my Toyota Fortuner 2015 model! Where can I buy this 3 wire bypass unit!? And How can I connect to watch while in motion! Please Help me!
They have disappeared off of amazon, so check ebay!
With firmware version 3.0 I can no longer bypass the warning screen on my dmh wt 76nex
Is there a new version of bypass or does someone have an older firmware version I can flash?
I haven't found one yet unfortunately. But if you hear one for the wireless CarPlay units, let us know!
My bypass looks the same except I have a yellow wire ... where does that one go?
You probably picked up one for Alpine radios.
Bend over and I'll show you
OK. The Light Green wire on the Pioneer unit also has a Yellow wire connecting with it to the Light Green wire of the vehicle wire. Do I connect the Microbypass Green Wire to the Light Green wire of the Pioneer Unit only like in the instructions and keep the Yellow wire as is or also disconnect the Yellow wire as well?
Correction. It's the Yellow Black wire not the solid Yellow wire.
NVM. I took off the electrical tape and saw that it wasn't really connected to the Light Green wire!
is this by pass also good for the Pioneer avh Z 5000 DAB?
Do you have to hook the BLUE/WHITE to the vehicle harness for power? I have a DMH-160BT PIONEER and I don't have the Blue from main power hooked up at all . I don't have an Amp, or power antenna to need any hook up.
the radio harness blue white wire is an amp trigger. If you don't have any other source that needs it (factory amp, aftermarket amp, etc), then it can simply be connected to this bypass only.
@Provo Beast Audio Installation I installed exactly as you did but different off/on/off switch. I don't get the parking brake warning, it goes directly to the legal warning about watching videos from the drivers seat!! I can mirror link my phone, the radio recognizes the phone because I can sweep between pages on the radio screen but no video!!
Guys just use a 3 way relay from JCPenney lights etc. All good
Yes but what is u have sub and amp
I did this with a 4500NEX and now the back up camera doesn't automatically come on when I go in reverse. Any suggestions?
Sounds like a wiring issue to me. Without seeing the harness, hard to diagnose. Also since the w4500nex has a built in gps antenna and vss, the bypass still may not work for your application
Now since you're using the amp remote wire for the harness, can toy still run the remote to a amp?
Absolutely.
Best explanation on the tube thanks bro
Ok i know the black grounds go to the black ground on the wire harness, but after i put the blue and blue and white wire together what do they connect to on the wiring harness?
I am wondering this same thing… did you figure it out??? Lol
I have 2 questions, one will this work on an AVH-3500NEX? Two where do I get this parking brake bypass wire from?
yes. and just search pioneer bypass on amazon.
I just bought a pulse bypass thing also.. mine look like yours, but has a 4th wire (yellow).. got it from Ebay & they assured me that it's for my pioneer AVH-200EX. where would the yellow wire go?
Supposidly the yellow wire is use for Alpine units.
Didn't work on my 2330nex and im 100% sure it's installed correctly
Mines 2, what did you end up doing?
I have the pioneer DMH-2600NEX. I have the Parking break bypass and when I get the warning sometimes the “OK” button let’s me press it and sometimes it’s greyed out and doesn’t let me go into AV. It’s pretty annoying because I never know when it will work. Is there something else I can do like a switch? I would appreciate the help - thanks!
Same here....
Can you use quick wire taps to install this after the stereo has already been installed?
Yeah, you can use T Taps sure.
Morning Provo Beast ! I'm planning the installation of my AVIC-7200-NEX on my 07 Toyota 4 runner, and you're videos are really helpfull. Thank you so much for posting. I was thinking about buying the microbypass, but on the sonic electronic website, i've seen this module is not required for the recent AVIC Pioneer HeadUnits.
=> Does it mean I can leave the blue/white "System Remote Control" wire from the Pioneer harness ?
=> Or should I connect it to the blue/white "Amp turn on" wire from the CRUX adapter (as I do not have a JBL system, I think there is no need to connect them. The blue "Power antenna" wire from the CRUX adapter is probably also useless)
=> I'll probably have to run the light green "parking break" wire coming from the Pioneer harness all the way to the left of the steering wheel in order to connect it. So much fun :)
Thanks a lot for your help
Our friends over at Five Star shows you how it's done: th-cam.com/video/w6Bznj-RmoY/w-d-xo.html. The blue / white wire can be tied into the crux harness blue white wire to be safe.
Provo Beast, thanks a lot for the fast answer ! That's exactly what I was looking for :)
Subscribe!
Mine doesn't even work and I did the same thing
Mine doesn’t work either
Me too
Ground out both green wires
I have 4500-nex. Didn’t work either
Sometimes you go to turn the switch on and off
Where do i buy that
Grab it tap it, now i'm a crimp guy too!
what about a factory amp for my mids and highs and a aftermarket amp for my sub? Would I connect both amps and bypass to remote wire?
This has nothing to do with amplifiers, this just bypasses the video restriction on Pioneer touch screen radios for video playback while in motion.
This doesn’t bypass all the other features that normally get kicked out like certain settings?
Does not work with pioneer DMH-7600NEX.
Only had three wires to hook up so I did it correctly. Dam shame.
What if it's build in car video player...Like Ford Ecosport which shuts off video after it reaches 20 KM speed...????
Not much you can do about that unfortunately
Hi buddy. Nice video! Does this bypass also work with Pioneer SPH-360 DAB?
in some circumstances yes. Units with an onboard GPS antenna occasionally negate the bypass as the unit can still detect you are moving via GPS antenna. I haven't tested the newest gen Pioneer units that are manufactured through the Dual facility. Give it a shot and let us know if it works!
Will this work on a dmh 1500nex? Originally when I installed it I linked the green parking brake wire to the ground which I was told tricks the system into thinking the parking brake is on and it works for some stuff but I tried putting a flash drive in with a movie on it and it’s playing in the background but the screen says “to view video press ‘ok’ to confirm parking brake has been applied, released and applied again” Ofcorse it’s linked into my ground and the “ok” button is darkened out. If I get this part will that fix this?
Yep, should fix this!
Link to part in description.
What if the other harness doesn’t have a blue wire?
Other harness as in the harness for the radio? Just connect it into the red or blue / white wire.
My bypass has a yellow wire for my pioneer? Do I need it? 4500nex Radio
If you have a yellow wire, you may have one that also accommodates an Alpine unit. Some Alpines require a foot brake wire which the yellow usually is for. Because you have a pioneer, it may not be used.
This did not work for my 2330 NEX what could it be The radio works fine it’s just a bypass won’t work for me to watch videos or DVDs I can get it all the menu settings but for some reason it just won’t work for the DVD
NEX can differ and our friends over at Five Star has a video on that here: th-cam.com/video/1uiG5bnadfQ/w-d-xo.html
Just ordered from your ebay store, thanks! Not sure on the third set, where do you say this one goes to after they are crimped? I'm putting this into an RV, will it even be used? Its the blue /white wire, think you called it an accessory.
This is specifically for pioneer radios, regardless of the vehicle it is being installed to. Black to ground, Green to parking brake, Blue / white to Pioneer's blue white wire.
@@ProvoBeastAudio Sure just didn't know if there was something from the car side or camper side that also needed to connect to that blue/white wire? Sorry didn't ask the question as well as I should have first.
can i also have my amp wire hooked into that blue wire as well as the bypass wire ??
Thats exactly what i was wondering. The guy in the video said the black and the blue/white go back into the harness but that doesnt make sense (unless the ground is supplied thru the harness) i thought the black from the headunit harness gets grounded to the vehicle and the blue/white is for the amp which is normally used outside of the connector meaning it gets wired directly to the sub amp.
Will it work on my pioneer avh-2550nex?? Someone please let me know?
yep.
My Pioneer DVD works when I put a DVD, eject it, then insert it again. The video will show while driving but movies on my usb have the restriction. Do I need the bypass? If so, why does the DVD shows without it?
Great question, not sure. The bypass is only a few bucks, so regardless, i say it's worth it for usb video. You call.
I'll try the bypass to see what it does. Thanks.
This didn’t work for the pioneer avh-w4500nex
4500nex can just be bypassed in the software itself. th-cam.com/video/r7esm2nSmoQ/w-d-xo.html
@@ProvoBeastAudio thanks! Got it to work
Hi my cousin has a jvc and he said all you do is connect the video wire to the ground wire and that will bypass the emergency brake but i have the pioneer avh-601ex so will that work on that model stereo? cause i just got it installed today and the parking brake method ain't working and i really don't wanna drive back to best buy
Nope, different brands require different connections. You will need a bypass for your pioneer as they require a double pulse negative.
Ok its fine the guy at best buy installed a toggle switch on mine so its all good now
Hey I hooked up my bypass but now it's saying my parking break is constantly engaged even though it is not. Help!
Light green on bypass chip should be connected to light green on radio, not car
The Midnight Fox lol
Thanks
what did the plug on the bypass plug into?
There is no plug, it’s a relay.
Would this work on a DMH-160BT?
You bet!
I installed one of these on my avh 2550nex and i can watch dvds while driving. When i am using android auto it does not allow me to browse all of my music while driving. Anyone know if this is a problem with the bypass or is it something that cannot be changed.
Mikeyr110 So how do you choose a song?
@@adamrodriguez1669
If I use samsung music I can see prolly 20 artists and thats it. I cannot scroll through all my artists while driving. I can search with voice command or I can use my phone to choose any song.