Great video, thank you! I have a 3055 with latest firmware ... I'm having an issue using EasyDMM ... I thought it would be able to connect to the 3055 via the LAN, but when I select VXI11 and enter my 3055 IP, it doesn't connect and returns an error. Can the 3055 only connect via USB? Which then begs the question, why does it have a LAN port?
Today I received my SDM3055 and I´m surprised that the power up is faster than what´s showed in this video. The Siglent Logo appears immediately and the total startup time is less than 30 seconds. Not bad.
Good work. are you aware of any multimeter that would give audible tone when measuring voltages. For multi point testing without looking up to the meter.
That path navigation is not that bad because it works as all the file explorer en computers when you navigate with the keyboard arrows. rigth arrow enters folder
I just got the multimetter and i'm having problems with it. After finishing measuring a resistor, sometimes, the auto-range relay get crazy for few seconds and then stops and display "overload". This does not happen when i touch the Black tip with my finger! Sometimes it goes crazy and instead of "overload" i get a mega ohams measurment while the tips are not connected to anything. something between 50-100 mega ohms. It's seems like Problem in the Black Connector.
הבזול ביוקר- הסינים עצמם בסין לא קונים את זה ומביאים לעצמם TEKTRONIX ו KEYSIGHT ו KEITHLEY .הטרנספורמטורים שלהם מזמזמים , הפלסטיק ממוחזר ונשבר מהר, קבלים.....חלקים מכנייםעל הפנים. האלקטרוניקה עובדת כי היא אמריקאית אבל רק שבועיים :-(
Hello, really nice review one of many, im trilled to buy one of those contenders the Rigol DM3058E, PeakTech P4075, B + K Precision BK2831E and Siglent SDM3045X, for me fast continuity is important and precise reading as it can be on those unit, that is my budget right now. What would you recommend of those 4 . Thank very much.
specs seem to say 240k count, seem to only use 24000 of those which is fair enough if you have noise, averaging and calibration mapping. 240k ADC costs 2$ or even less. Put a few temperature sensors on it and a digital calibration map and that might just do the trick. The oversized case is easily the most expensive part.
I hope that someone please want to explain the difference between precision and resolution? (English is not my first language) As I understand it, accuracy is how near the real world, it shows. And precision should be the resolution it haves?
@@GregorysMode I don't agree with this explanation. There are three different concepts that are frequently mistaken, which are resolution, accuracy and precision. Resolution relates to the minimum value that can be measured, and depends directly on the number of digits. Accuracy is, as stated before, how close it is to the actual value. Precision, however, is related to repeatability.
o-my.. it seems to take a lot of technology to make the 5.5 and 6.5 meters and the price tag shows it. 🧐 still it would be nice for some hobby versions some day. 🙂thanks. 🐼🌳☕ for some readings you do not need to look at the MSD just LSDigits such as hunting down a short circuit on a PCB and the like. Mmm. 🤔
Great video, thank you! I have a 3055 with latest firmware ... I'm having an issue using EasyDMM ... I thought it would be able to connect to the 3055 via the LAN, but when I select VXI11 and enter my 3055 IP, it doesn't connect and returns an error. Can the 3055 only connect via USB? Which then begs the question, why does it have a LAN port?
Today I received my SDM3055 and I´m surprised that the power up is faster than what´s showed in this video. The Siglent Logo appears immediately and the total startup time is less than 30 seconds. Not bad.
Good work. are you aware of any multimeter that would give audible tone when measuring voltages. For multi point testing without looking up to the meter.
That path navigation is not that bad because it works as all the file explorer en computers when you navigate with the keyboard arrows. rigth arrow enters folder
Can you achieve most of these accurate readings with an osciloscope as well?
No, an oscilloscope ONLY reads voltage
true rms or no.... can u measure less than 1 milli ohm
Can you make a video comparing UNI-T UT8805E with Siglent SDM3055 with Keysight Agilentkeysight 34461a ?
Lovely display Martin but I have noticed with other reviews its a very slow meter.
The latest firmware offers significant speed improvements.
i'm torn between rigol and siglent and would like to know if there have been any improvements. can you post an update?
Does you'r meter shows 50hz frequency on frequency testing when probes are in open circuit?
I just got the multimetter and i'm having problems with it. After finishing measuring a resistor, sometimes, the auto-range relay get crazy for few seconds and then stops and display "overload". This does not happen when i touch the Black tip with my finger! Sometimes it goes crazy and instead of "overload" i get a mega ohams measurment while the tips are not connected to anything. something between 50-100 mega ohms. It's seems like Problem in the Black Connector.
הבזול ביוקר- הסינים עצמם בסין לא קונים את זה ומביאים לעצמם TEKTRONIX ו KEYSIGHT ו KEITHLEY .הטרנספורמטורים שלהם מזמזמים , הפלסטיק ממוחזר ונשבר מהר, קבלים.....חלקים מכנייםעל הפנים. האלקטרוניקה עובדת כי היא אמריקאית אבל רק שבועיים :-(
Hello, really nice review one of many, im trilled to buy one of those contenders the Rigol DM3058E, PeakTech P4075, B + K Precision BK2831E and Siglent SDM3045X, for me fast continuity is important and precise reading as it can be on those unit, that is my budget right now. What would you recommend of those 4 . Thank very much.
which did you end up buying and how you like it
I love the look of the Siglent, but has the firmware fixed/improved things?
Yes, much quicker in the new firmware. Filter still takes a little while to settle, but it’s quicker now that the update rate has improved.
specs seem to say 240k count, seem to only use 24000 of those which is fair enough if you have noise, averaging and calibration mapping. 240k ADC costs 2$ or even less.
Put a few temperature sensors on it and a digital calibration map and that might just do the trick. The oversized case is easily the most expensive part.
+Dan Frederiksen
The ADC in the SDM3055 is a AD7190 with a MAX6325 Voltage Reference
+Michael Schneider interesting. thank you. 7$ adc. I wonder how relevant the voltage standard is, if a temp sensor and mapping is as good or better
Can this meter measure dual AC voltage inputs?
Wish you would do a review of the Keysight 34450a DMM
Go for keithley 6500
I hope that someone please want to explain the difference between precision and resolution? (English is not my first language)
As I understand it, accuracy is how near the real world, it shows. And precision should be the resolution it haves?
Accuracy is how close it is to the actual reading. The closer it is, the more precision it has.
@@GregorysMode Thank you!! :-)
@@GregorysMode I don't agree with this explanation. There are three different concepts that are frequently mistaken, which are resolution, accuracy and precision. Resolution relates to the minimum value that can be measured, and depends directly on the number of digits. Accuracy is, as stated before, how close it is to the actual value. Precision, however, is related to repeatability.
Hello
I plan to make a purchase and I do not know if it is a good choice. Is it worth buying or is it 3045x?
How do you do it after years?
The “overshoot” in two of the cases was mVDC. So it was not really an overshoot.
Hi, good job, very useful test (like other).
o-my.. it seems to take a lot of technology to make the 5.5 and 6.5 meters and the price tag shows it. 🧐 still it would be nice for some hobby versions some day. 🙂thanks. 🐼🌳☕
for some readings you do not need to look at the MSD just LSDigits such as hunting down a short circuit on a PCB and the like. Mmm. 🤔
There are sub 100 EUR/USD hobbyist DMMs. Look at for example the Owon XDM1041.
it's the way you are working it. you have the settings wrong that's the reason it's so slow, can't you see that.
The latest firmware is better
Siglent is a Chinese knockoff that's not close to Allegiant.
what about rigol better than siglent?
First!
OMG it still has the bullshit 20 second boot time just like the 3045. Rubbish... Siglent is out for me. Thats a deal breaker.
thanks... sig is useless