ฝัง
- เผยแพร่เมื่อ 6 ต.ค. 2024
- 12-7-17
HI- we have a batch of these on sale for Christmas time over on e-bay: www.ebay.com/i... will get you there. Thanks!
9-26-17
Thanks to everyone who sent kind wishes during my recent health issues! I appreciate it. Things are much brighter right now and we have been doing some new things. One of these is a redesign of the HP tool. The tool now features a 1 piece body instead of two. This makes things MUCH more precise and accurate. We also now include 3 punches standard - The regular HP, one we call "The Wedge" which creates a HUGE HP tip, and a special flat nose punch that can make anything from a slight flat tip to a virtual wadcutter! I hope to do an updated vid soon - We have these available for sale, just e-mail for details: jksswage@yahoo.com
BTW - the run 90 bucks plus 7.15 flat rate in the USA. - แนวปฏิบัติและการใช้ชีวิต
![[Live] : ONE FIGHT NIGHT 25 วันนี้!! "อเล็กซิส vs รีเกียน"](http://i.ytimg.com/vi/suVr9a6BM2g/mqdefault.jpg)
"I never been real comfortable tapping on rimfire shells with a hammer..." ... fell out of my chair laughing on that on.
Just ordered mine can’t wait for it to get to my house.
I figured out another real good use for this tool. I put my 223 projectiles in it and it not only gives me a devastating HP. But it also makes all the castings a perfect .226 in diameter AND a consistent OAL with in a half thousand. I went on eBay and I was looking to pick up another one. Are you still making these????
Howdy there; awhile back I bought a die set from you. I'm wondering if your still working? I need parts. Thabks
where is Roseanne? you sound just like John Goodman
man I was about to say this guy sounds like John Goodman
I hope you're doing well.
It's always a somber moment when you find a dead channel. Can't help but think the worst
I would be happy if I could find one.....
Im looking for something that will remove or tapper my bullets so they feed better in my pistols .
I’d like to order one. Where can I find them?
3-9-18
I have three of these listed right now on e-bay, When these are gone it may be a while before i can do anymore. I have taken on a fairly big job which is going to tie up most of our machinery for several months. I guess if your interested this may be it for a little while- Thanks
www.ebay.com/itm/183115831915?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Not sure - contact me at jksswage@yahoo.com, when your returns come back and we'll see if we can fit you one in.
I'M LOOKING FOR SOME DIE SET TO MAKE THE .22 LR CARTRIDGES FROM A BRASS SHEET.
From where shall I get bullet making
tools
Hi are you still making this item?
hi kelly would lil gizzy benefit me , my 22lr has a .221 bore thats match grade, tighter than all other 22lr's
mikey Rusignuolo #47);
I wouldn't use it on ammo that has a match grade chamber. I ream match grade chambers and they have a taper at the end and the bullet is pressed into the taper making a nice seal. As he said it does cause the tip to swedge out this would more than likely cause feeding issues and the bullet may not seat itself home due to the slightly larger diameter made by using this tool. It would probably make a match barrel unable to go into full battery.
Thats not to discourage you from buying it. He did make a really cool tool and for most sporting chambers the diameter is wide enough to accommodate the bullets you make using this tool. The SAAMI standard for the PTG Match.22lr chamber is 1-30 degree angle where the bullet is its smallest (the tip), the top of where the casing sits diameter is .2256, the base of where the casing sits is .2269, the length of where the casing itself sits is .630. So if you measure the diameter of the bullet made with this tool and it is less than or equal to .2256 then it could work but it is unlikely because that is the area that also has the 1-30 degree angle and by having the bullet swedge out it interrupts that angle.
Interesting tool. I think I might refer it to the Paco tool. Do you have any of these available?
Yes - You can reach me at jksswage@yahoo.com and i can set you up with one.
Are these still available?
Is the hole centered in the bullet? I have one now (different make) that doesn't center the hole very well.
Yes indeed. the current version of the tool is a one piece body, and it keeps the whole operation VERY concentric
Best lil tool I’ve ever used hands down and was nice enough to ship to Mexico thank you sir
Hey there!! I want to buy one set of those little tools!!! Didn’t make it on eBay! Please help
Where can i order one of these??
Any accuracy testing with these?
I’ve hit squirrel with them at 120 yards .nice hits there what can I say bloody
What keeps this from pushing the bullet down into the casing and compressing the powder? Thats one of my concerns after seeing this...
Several things, but first and foremost 22 LR bullets are heeled. They CANNOT be pushed back. The base is inside the case and the top half is outside the exterior diameter. Second 22lr bullets are SOFT to the extreme. You can use this tool with just finger pressure if your thumb is strong enough@! Although it gets tiring. Just never enough pressure to over come crimp anyhow.
jksswage Thanks!
My pleasure! We have a few of these available on e-bay right now for those interested - Thanks.
I have a Lee Classic Turret press (that I index manually). Is it possible to rig this up to work with the Lee as a press? I don't have a drill press setup like yours...
Sure, i think so. If this is the press that uses regular shell holders in the ram, and the turret head rotates - I make a set up with two "anvils" And a Gizzy. One anvil snaps in like a shell holder. the other screws in under the head effectively creating a very light duty arbor press. It is low leverage,but this thing does not require but a few pounds of pressure. I have one of these on hand. I had it listed for a while. I can re-list if you like. You can also e-mail me at jksswage@yahoo.com about this.
Any chance you happen to make this tool in 25auto??
Correct me if I'm wrong but, it seems to me like there's a chance of pressing the bullet deeper into the case liked this. There by increasing the chamber pressure.
Does anyone have any info on this?
22lr is a heeled bullet, the bullet rests on the rim of the case, preventing setback. That being said, setback really doesn't increase pressures by much. It is mostly a concern in max handloads.
Do you a website and if so what is it?
No no no... please, take my money lol. Seriously though, how much and where can I get one?
Email sent.
Can this work as does a Waltz resizing die?....to result in a slightly "fatter" round ?
yes, it does bump up the diameter during the uniform/hp operation
@@johnharvey4911 ...thank you !!
这是底火帽吗？
why is flat nose more deadly than round nose.
A flat nose transfers energy more efficiently and also does more tissue damage than a round nose.
still available? yahoo address no work
Still making these by any chance?
yes - this link will get you onewww.ebay.com/itm/185454624467
The ebay link is dead. Any way i can still buy one of these? Canada
Just look up on eBay lil gizzy ,just got mine and damn
@@CasaPescayMas thanks for the heads up. I just got mine ordered
how much? where to buy?
Hello Angel, Sorry about that! We have had some business changes of late. Contact me at jksswage@yahoo.com and I can fix you up.
Still available?
Sell em on amazon
Not at this time - I sell them on ebay though
www.ebay.com/itm/183091906632?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Can’t find it on eBay
@@jksswage1153 How much?
I don't see any thing
Where can I order one of these?
Get hold of me at jksswage@yahoo.com, and I can fix you up with an order!
jksswage just came across your vid wondering if your still making these? Would be interested in buying a couple
If you think this is good, check out the Waltz Die, you'll love it.
This thing is a killer on rabbits and squirrels,the hole are the size of my finger . The exit hole .
1/12/19
Hey everybody! Holidays are past, and we had some time to get a few of these done. They are listed now at e-bay: www.ebay.com/itm/183633263891?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Ebay says no longer available?? Sure could use one,if it's possible. Can't get hp's in canada and are overrun with Richardson ground squirrels ( gophers)
"As you can see" but you can't see anything. LOL
You really need to make a better quality video with some close ups from a better camera.
Not criticizing you or your product, just your video quality.
Thanks.
Ahhh, wouldn't you just buy hollow point 22lr? I'm mean they are cheap! Use your round nose to target practice. Where's the logic here?
Three significant things; First the bullets are also swaged up slightly in diameter and greatly increased in uniformity, meaning better accuracy. Second, hollowpoints basically come in one configuration this die will create a number of different options many of which can drastically improve terminal performance. And MOST IMPORTANT, what do ya do when hollow points ARE NOT available over the counter - which thanks to shortages, hoarding and the left, has been a significant reality for much of the past 4 years, and really for a great deal of time n and off going back to 2008.
any of these still available by chance? Looking to increase the diameter of my 22lr bullets from the standard .2230" to .2240" so i can match up perfectly with my marlin micro groove barrels
I always have some on hand - you can e-mail me at jksswage@yahoo.com. There are also some listed on e-bay if you prefer to buy that way. Thanks
jksswage sounds good thanks!
@@jksswage1153 are these available pl