5.0L Fuel Injectors for Late Model Land Rover 5.0L V8 Vehicles

แชร์
ฝัง
  • เผยแพร่เมื่อ 7 ก.ค. 2024
  • Watch Doug, our Land Rover Master Technician, explain removal and installation of 5.0L Fuel injectors for all 5.0L V8 from 2010 to 2013 or 2014 depending on Your model Land Rover or Range Rover.
    Doug uses a bare head in our demonstration to show removal and replacement of the fuel injector (part # LR079542).
    0:00 5.0L Fuel Injectors for Late Model Land Rover 5.0L V8 Vehicles
    0:32 We take you to the point of disassembly
    1:22 Depressurize the system
    1:35 Remove fuel pump fuse
    1:44 Run vehicle until it quits
    1:53 Take the lines off the fuel rail
    2:05 Remove fuel injector
    2:51 Special tool to pull injector
    4:43 Install new injector
    7:41 Install new retainer
    8:08 Reverse process to reassemble
    8:36 Ordering information
    Questions about this video? Call 1-800-533-2210 or visit www.roverparts.com and contact us via the question tab.
    Fuel Injector Set Plus Tool:
    www.roverparts.com/fuel-syste...
    Fuel Injector Set Only:
    www.roverparts.com/fuel-syste...
    Fuel Injector Puller/Installer Tool:
    www.roverparts.com/fuel-syste...
    #atlanticbritish #fuelinjector #landrover
  • ยานยนต์และพาหนะ

ความคิดเห็น • 31

  • @anthonywilliams4100
    @anthonywilliams4100 5 ปีที่แล้ว +1

    Thank you!

  • @cruisertechgt
    @cruisertechgt 3 ปีที่แล้ว

    I got a jaguar XF 5.0L (same engine). Suspected injectors clogged or "varnished" and just took it to the JLR techs for injector cleaning. They used some tools that spray through the injector. Also additive in the tank. Car is running rich now but no more misfire codes. Hope I don't have to change the injectors as I hear they are expensive. Either way thanks for hte video as I am a technical guy my self and love to learn about what is the job being done. Great tool to take out and install those injectors. I would only use a JLR approved tool for that job based on the High PSI sensitivity.

  • @DallasAutoDiag
    @DallasAutoDiag 3 ปีที่แล้ว

    Is the 2000 psi on cranking also or just running? I'm getting only about 100 psi at cranking. I want to see if I have a bad mechanical fuel pump or 100psi at cranking is normal untill engine starts.
    Thanks in advance.

  • @nyplantings2420
    @nyplantings2420 8 หลายเดือนก่อน

    LOVE these videos!
    So I have the supercharged V8. Is this more difficult job?
    Thanks.

  • @nyplantingsgardendesigners5645
    @nyplantingsgardendesigners5645 3 ปีที่แล้ว

    Good vid brother. Liked and sub'd. Couple questions please:
    Do I really need to pull the supercharger for a drivers' valve cover gasket replacement? Is it possible overfilling caused this sudden leak? The car was fine for 70k miles.
    Thanks, Todd

  • @ralfbond258
    @ralfbond258 4 ปีที่แล้ว +1

    jag ajx v8 !

  • @guidogutierrez3462
    @guidogutierrez3462 ปีที่แล้ว

    Can you guys put video how do valve cover in lr4 5.0 v8 normal not sc . Please many 5.0 hse not videos of val e cover

  • @ianchmp
    @ianchmp 5 ปีที่แล้ว +1

    Any tips for removing the fuel rail? I’m afraid of damaging the rail, injectors or valve cover if I use too much force to pry it off. Thanks!

    • @lutronc4412
      @lutronc4412 2 ปีที่แล้ว

      What did you end up doing? My fuel rail is seized on injectors.

    • @hawaiiyamat
      @hawaiiyamat 2 ปีที่แล้ว

      @@lutronc4412 use a rope or nylon tie down strap

    • @vietec
      @vietec ปีที่แล้ว

      I ended up using a BFS and applying leverage while wiggling the rail off. I was in a similar pinch when a kind LR tech on reddit told me that it was the only way. Once it gets moving the whole unit comes off easily.

    • @vido4x4
      @vido4x4 ปีที่แล้ว

      @@vietecWhat is a BFS?

    • @vietec
      @vietec ปีที่แล้ว

      @@vido4x4 Big Fucking Screwdriver

  • @BMWUS
    @BMWUS ปีที่แล้ว

    I keep getting a cylinder 5 misfire code for even on after a fuel injector and spark plug job filters and Mafs. Only on idle when starting. You can barely feel it. Anyone have any idea?

    • @davidhall3747
      @davidhall3747 ปีที่แล้ว +1

      Did you replace the Coil Pack?

  • @HoweDoYouDo1999
    @HoweDoYouDo1999 4 ปีที่แล้ว

    Varnish build up........know how long I haven’t heard that word my god 😂 yep that’s it I’m officially a senior 😂

    • @lynxstarautomotive208
      @lynxstarautomotive208 4 ปีที่แล้ว

      I’m 37, use it all the time. That is what it is called? Varnish.

  • @landroverzone9824
    @landroverzone9824 6 ปีที่แล้ว

    Do you think This injectors fit on discovery’s 2?

    • @atlanticbritishrp
      @atlanticbritishrp  6 ปีที่แล้ว

      No, the fit the following Rover models:
      LR4 / Discovery 4 V8 5.0 Liter | '10 - '13
      Range Rover Full Size | '10 - '12
      Range Rover Full Size Supercharged | '10 - '12
      Range Rover Full Size V8 5.0L Naturally-Aspirated | '13 - On
      Range Rover Full Size V8 5.0L Supercharged | '13 - On
      Range Rover Sport | '10 - '13
      Range Rover Sport Supercharged | '10 - '13
      Range Rover Sport V8 5.0L Supercharged | '14 - On

    • @robertotorres3587
      @robertotorres3587 6 ปีที่แล้ว

      I have 2013 RR sport supercharger I bought it with 24000 miles first $7,000 fine then a bad injector I changed it and now again at 40000 miles another bad injector what is causing this any ideas

    • @georgecreamer
      @georgecreamer 6 ปีที่แล้ว

      Try BG 44K cleaner

    • @GNogueira83
      @GNogueira83 5 ปีที่แล้ว +1

      You have to remove the valve covers for replacing an injector?

    • @nepicness
      @nepicness ปีที่แล้ว

      No, you can just replace an injector without taking the valve cover off

  • @deizle615hitz
    @deizle615hitz 3 ปีที่แล้ว +1

    I got a 2010 xf 5.0 sc and the injector is stuck in

    • @nepicness
      @nepicness ปีที่แล้ว

      Use the slide hammer harder

  • @frederickfrancis2987
    @frederickfrancis2987 2 ปีที่แล้ว

    You don't teach people from middle you teach from the top to the bottom

    • @davidhall3747
      @davidhall3747 ปีที่แล้ว +1

      Watch the Timing Chain replacement video.

  • @adbyrd29
    @adbyrd29 3 ปีที่แล้ว

    What a stupid design smh