Thanks Frankly just started this adventure I am a 65-year-old young at heart. Just purchased a Reality CR smart 10 Pro. Started a Mandalorian costume. Can't wait to start an Ironman costume. You have been and are a great help to my adventure in my fabrication of our superheroes. Thanks again. I look forward to seeing you in Los Angels Com.
Frank, thank you for all your videos. I only got my printer on Christmas. Because of your videos, I've been able to print a 37in Master Sword on a 150mm print bed. I'm now to the point of priming it and finishing it up. But thank you for everything you do. Semper Fi.
I'm actually printing my star boost as my first iron man suit on the anycubic Kobra max for the tx renaissance festival heros and villains weekend and this series has been a huge help so thank you and keep up the good work we can see how much passion you have for 3d printing and cosplay and it is a large part of what inspired me to get off my butt and do it.
If plastic digging in on the top of the foot/toes, steel toe. I wear steel toe sneakers all the time now, as they are cheaper than name brand and I can wear them to work, no boots needed! metatarsal protection can protect the upper part of your foot. Footwear in some industries come with them built in, but you can also get separate pieces
I've been watching the channel for a while and I do like seeing how the suite's work and I love the star boost suit I don't know what kinda gamer you are but if master chief had an iron man suit I kinda imagine that's what it would look like except green but I like the white because it's just awesome 👍
Thanks Frank! I have been struggling with the legs, I will give this a try, and as you have stated in the videos the hands are tough to get to fit comfortable
The leg comfort killer me in my mk7. It was on Halloween and I was walking around and the right thigh fell down. It wasn’t visible to anyone else but it was pinching my knee so much and I tapped out about 10 minutes later. 😂
Actually stumbled on you a couple nights ago and you have convinced me to give building an MK39 a try with your great videos. I know my way around a 3d printer but I have never done anything cosplay related let alone on this scale. I am very curious to paint, wire up gloves, helmets, etc. so I am sure this will be a very educational journey and I am looking forward to it. ... needless to say going to be going through your playlist for this suit over and over I suspect haha. Thank you for providing all this great information to the community.
Just love your videos, it’s so generous of you to share exactly how you make your suits. I’m gearing up to make my own (Rescue), so I’ll be referring to your vids a LOT!
Thx for the awsome tutorial to built starboost. My mk85 is on the way and the last Part of the upper body is on the printer. I can't wait to finally put it on
Thanks for the video on how you wear your starboost. I ended up with similar straps to you for mine but will look into the Abbs and chest piece as I had no straps on. One and found they moved around allot. Looking forward to future updates.
Just binged your whole journey of making this suit and now I can't wait to start my own. Can't wait to see what else you do with this suit in the future!
Frank!! I just thought of this applying to your suit. I want to put a fan in my suit, when I finally make it (designing and brainstorming the full idea still). The jet pack could have pc fans in it to add airflow for you to not overheat as much! I recall you speaking of how you and others have gotten sweaty in the suits. It might be too late to add something like this and the power cost to your battery might not be worth it, but, maybe you could put a mesh instead of a fan to allow for the air to still come in. That could help to counter any heat from the electronics. Plus, it would be something else to brag about your suit 😂
I was lucky and got pinched only on the 3rd time I was out in the suit. But then I immediately realised “Ah, THAT’S what Frank was talking about”. Definitely can recommend to avoid this at all costs 😂 Great video as always, thanks!
@@Mickelmakes3D My head got stuck in an incorrectly sized Dragon Ranger Helmet once. My Sister laughed uncontrollably for 5 minutes straight before helping me get it off. Not my proudest moment, but an awkward moment indeed.
Awesome, bro. My starboost build is still going strong. Have some questions on the arc reactor chest plate cover and what you used for that. But I can't wait to get everything done for Galaxy Con in July.
I still haven’t started starboost on my ender 3. Because with all my other wearable projects I’ve gotten “sterling Archer” levels of lucky with scaling.
Im building my own mk3 helmet right now, inspired by your videos, and I’m on to the final stages of the assembly, (printing the main helmet part and circuits) any tips for starting the circuit for a helmet? I am using an arduino uno, soon switching to nano, as well as a motor controller, two micro servos, and a whole lotta wires. I am looking for the right pcb board printers for the project, and I will hopefully build a full suit by the time comic con comes around to my area! ❤
Awesome vid! Maybe I missed this, but have you made a vid where you went over the padding? Working on my own suit and I want to make it as comfortable as possible.
Quick question for you bro... are you using the gloves with hinged fingers or no hinge? I've printed a couple sets of the hinged ones in different sizes but wanted to get your opinion.
@@FranklyBuilt Thanks for responding so fast. Rustoleum is a no go and there is duplicolor but not the same one as you use in your videoes, I will give it a try. How about MTN Pro..I saw you using it in UK video but everytime I use a primer there is like dust coming out making it a pain to sand down. I tried tamiya which is non drip but there cans are really small for the price.
Awesome video as always, I just want to ask though, what do you use to connect the top part of the chest to the back, it looks magnetic? If so, how powerful are they? Thanks buddy.
Did you buy or adopt that Shiba Inu? Ive felt like that would be the perfect dog for me after doing alot of research, but never wanted to buy pure-bred. Beautiful dog
I’m curious about your 1 wire setup going from the backpack to the helmet and how it works (I am making a mk85 with the color pallete of the mk39, but mainly focusing on creating the torso and helmet right now), I’ve watched all of the series videos I believe but can’t remember which one discusses this topic. Could you point me in the right direction?
Thanks Frankly just started this adventure I am a 65-year-old young at heart. Just purchased a Reality CR smart 10 Pro. Started a Mandalorian costume. Can't wait to start an Ironman costume. You have been and are a great help to my adventure in my fabrication of our superheroes. Thanks again.
I look forward to seeing you in Los Angels Com.
Welcome to the comunity.
Frank this is a great video highlighting what you have had problems with the suit and how you have found ways to make it comfortable. Thank you
Frank, thank you for all your videos. I only got my printer on Christmas. Because of your videos, I've been able to print a 37in Master Sword on a 150mm print bed. I'm now to the point of priming it and finishing it up. But thank you for everything you do. Semper Fi.
I'm actually printing my star boost as my first iron man suit on the anycubic Kobra max for the tx renaissance festival heros and villains weekend and this series has been a huge help so thank you and keep up the good work we can see how much passion you have for 3d printing and cosplay and it is a large part of what inspired me to get off my butt and do it.
Great video, smashing it my man. Look forward to more content and seeing more starboost and mk85.
Always love watch the videos on saturday morning.
Love that suit and yes as 3d print makers were our own worst critics when it comes to our builds and what we think people will see and not see.
Thankful for you introducing me to 3d printing. I'm going to the silver age comic con here in Reno this summer in my first built iron man suit.
Love your work man. Thanks for all the tips. I look forward to seeing your next suit
Seriously awesome suit bro. Very beneficial video
If plastic digging in on the top of the foot/toes, steel toe. I wear steel toe sneakers all the time now, as they are cheaper than name brand and I can wear them to work, no boots needed! metatarsal protection can protect the upper part of your foot. Footwear in some industries come with them built in, but you can also get separate pieces
I've been watching the channel for a while and I do like seeing how the suite's work and I love the star boost suit I don't know what kinda gamer you are but if master chief had an iron man suit I kinda imagine that's what it would look like except green but I like the white because it's just awesome 👍
Thanks Frank! I have been struggling with the legs, I will give this a try, and as you have stated in the videos the hands are tough to get to fit comfortable
So cool! Thanks for this video and how it works. Inspiring.
👏👏👏
The leg comfort killer me in my mk7. It was on Halloween and I was walking around and the right thigh fell down. It wasn’t visible to anyone else but it was pinching my knee so much and I tapped out about 10 minutes later. 😂
Actually stumbled on you a couple nights ago and you have convinced me to give building an MK39 a try with your great videos. I know my way around a 3d printer but I have never done anything cosplay related let alone on this scale. I am very curious to paint, wire up gloves, helmets, etc. so I am sure this will be a very educational journey and I am looking forward to it.
... needless to say going to be going through your playlist for this suit over and over I suspect haha. Thank you for providing all this great information to the community.
Your systems are amazing!
Just love your videos, it’s so generous of you to share exactly how you make your suits. I’m gearing up to make my own (Rescue), so I’ll be referring to your vids a LOT!
Thx for the awsome tutorial to built starboost. My mk85 is on the way and the last Part of the upper body is on the printer. I can't wait to finally put it on
I can’t wait to make the Starboost helmet
Thanks for the video on how you wear your starboost. I ended up with similar straps to you for mine but will look into the Abbs and chest piece as I had no straps on. One and found they moved around allot. Looking forward to future updates.
I love this suit so much I'm actually going to be trying to make one for myself, I've learnt so much from you videos frank, thank you so much :)
Just binged your whole journey of making this suit and now I can't wait to start my own. Can't wait to see what else you do with this suit in the future!
The electronics in this MK39 looks so much cleaner than the 85!!
Well yeah cause the 39 has like. 2 lights lol the 95 has 20+
Yes true ! can't wait for the upgrades on both the suit ❤️🥹
Walsh3d has got some of the most beautiful helmets I’ve ever seen
I forgot there was another video for starboost lol 😂
Amazing working suit
Another great video Frank, nice tshirt btw 😁
I love the new intro Frank!!!!
Man I really like this channel I also like the 3-d printer reviews that you do. Keep up the great work!!!!
Frank!! I just thought of this applying to your suit. I want to put a fan in my suit, when I finally make it (designing and brainstorming the full idea still). The jet pack could have pc fans in it to add airflow for you to not overheat as much! I recall you speaking of how you and others have gotten sweaty in the suits. It might be too late to add something like this and the power cost to your battery might not be worth it, but, maybe you could put a mesh instead of a fan to allow for the air to still come in. That could help to counter any heat from the electronics. Plus, it would be something else to brag about your suit 😂
I was lucky and got pinched only on the 3rd time I was out in the suit. But then I immediately realised “Ah, THAT’S what Frank was talking about”. Definitely can recommend to avoid this at all costs 😂
Great video as always, thanks!
Would be really funny if you got stuck and had to call your wife. “Honey I’m stuck in an iron man suit”
Pretty much what happened to me but it was my lightyear suit 🤣
@@Mickelmakes3D My head got stuck in an incorrectly sized Dragon Ranger Helmet once. My Sister laughed uncontrollably for 5 minutes straight before helping me get it off. Not my proudest moment, but an awkward moment indeed.
"Let's face it, that's not the worst you caught me doing"
Awesome, bro. My starboost build is still going strong. Have some questions on the arc reactor chest plate cover and what you used for that. But I can't wait to get everything done for Galaxy Con in July.
It’s just clear plastic I cut to shape
Quality suit frank. Mk85 still my fave though 😅
your videos and builds are amazing! ive been thinking of a helmet to start but idk what to do. What would you suggest for my first helmet?
Please do a Star Lord helmet!
You continue to inspire me @Frankly Built
Dang, that’s a lot of parts
You should try a custom mando build. It’s pretty fun and a lot less work
Just wow!!!
I still haven’t started starboost on my ender 3. Because with all my other wearable projects I’ve gotten “sterling Archer” levels of lucky with scaling.
Next video are we putting jets in the arms?
Im building my own mk3 helmet right now, inspired by your videos, and I’m on to the final stages of the assembly, (printing the main helmet part and circuits) any tips for starting the circuit for a helmet? I am using an arduino uno, soon switching to nano, as well as a motor controller, two micro servos, and a whole lotta wires. I am looking for the right pcb board printers for the project, and I will hopefully build a full suit by the time comic con comes around to my area! ❤
For the arm gold cover you could 3d print the piece and mold it a make it in urethane
Awesome vid! Maybe I missed this, but have you made a vid where you went over the padding? Working on my own suit and I want to make it as comfortable as possible.
Yay a new video 🎉
Planning on making it to Comicpalooza in Houston this May?
I never click faster then when I see a new frank video drop
Epic Video
Me to
I love your stuff
I saw a Dr Fate helmet in the background
Is there a tutorial coming out?
Yep! Just need to finish the eyes. It’ll be out in February
Quick question for you bro... are you using the gloves with hinged fingers or no hinge? I've printed a couple sets of the hinged ones in different sizes but wanted to get your opinion.
Great video, as always. How do you attach the straps with clips to the armor pieces?
Super glue works great
Hey Frank I was wondering if you could create the Doom guy helmet from Doom Eternal.
whats the update on saba and i think you should make the main five rangers weapons
Can u make Mk 6 with all his missiles and stuff?
What brand of glazing putty and primer do you recommend since the bondo 3m putty isnt available in europe and the same with krylon and rustoleum?
Rustoleum or Duplicolor if you can get it
@@FranklyBuilt Thanks for responding so fast. Rustoleum is a no go and there is duplicolor but not the same one as you use in your videoes, I will give it a try. How about MTN Pro..I saw you using it in UK video but everytime I use a primer there is like dust coming out making it a pain to sand down. I tried tamiya which is non drip but there cans are really small for the price.
Awesome video as always, I just want to ask though, what do you use to connect the top part of the chest to the back, it looks magnetic? If so, how powerful are they? Thanks buddy.
Yep! Strong magnets. Check mk39 videoooo…4-6? I think that’s where I show them
Would the neck and articulating parts like elbows be better in TPU to simulate tubing?
Eh. Not for the Beck in this. I can move more than fine. Maybe parts of the elbow
Hey frank I am new to 3D printing do have any tip
When buying a endure5 plus 3d printer can titanium filament work with the printer
No probably not
Did you buy or adopt that Shiba Inu? Ive felt like that would be the perfect dog for me after doing alot of research, but never wanted to buy pure-bred. Beautiful dog
We bought her in Japan 10 years ago. Theyreeeeee. Stubborn
@@FranklyBuilt Heard they were a good first dog for someone with a cat
Have you thought of doing the hulk buster
I think I know why the next Mk85 video is the last of this one
Have you ever discussed how much each suit cost to build?
Yep! I did a video on it
Let's goooo
6:24 That looks sooo difficult...
Did any 3d artist edit the existing model to make it be able to fit your head, do you edit projects yourself for that? Or is it just straight up luck?
They do an average head size
I’m curious about your 1 wire setup going from the backpack to the helmet and how it works (I am making a mk85 with the color pallete of the mk39, but mainly focusing on creating the torso and helmet right now), I’ve watched all of the series videos I believe but can’t remember which one discusses this topic. Could you point me in the right direction?
That one wire is just a power wire. Positive negative. That’s all
@@FranklyBuilt oh, so you have the arduino in the helmet, then run power to the arduino
Hello I’d like to ask what 3d printer And modelling software you use
Is there a way to but or get one of your helmets?
On my Etsy yeah
how did you do the bending mechanism on the knees
Check the previous videos
Hey Frank, do you have a New System to put the chest on? I dont see magnets. I have a very strugle on this part. It works but it ist a nightmare.
Nope it’s still the 2 strong bar magnets
I am six foot tall and i am 13 lol. I think I am lucky with that, Stark was also 6 foot tall
Can you make CW flash savitar helmet
I bet wiring the whole suit up could be a nightmare
what % did you put for the forearms
I’m going to get lots of hate from this comment lol but I’m a Alabama fan and I’m making a Alabama themed mandalorian armor for the baseball season
Sick I need to see it even tough I’m some what of a Alabama fan
Fun fact Robert Downey Jr. is also 5'8"
What happened to your arm?😢
Can you make a Darth Vader helmet
Do master chief
Man second
damn im 5'9
Yassss frank can we do a Collab 1 time
Why didnt you make collaboration with some dude with jetpack and simply fly properly.. wth
Can you please make me a gears of war helmet
Dont you wish you could just press a button lol suit on ..suit off
1st
Do a colab with @Jlaservideo