Flashforge Adventurer 4 - amzn.to/3F2sAZ3 3D Files: Modular Hex Drawers - www.thingiverse.com/thing:1743145 Heart Shaped Ring Box - www.thingiverse.com/thing:3849577 3DBenchy Boat - www.thingiverse.com/thing:763622 MatterHackers 3D Printing Filament 1.75mm: Build Series PLA - bit.ly/MatterHackersBuildSeriesPLA Build Series Silky PLA - bit.ly/BuildSeriesSilkyPLAMatterHackers Build Series ABS - bit.ly/MatterHackersBuildSeriesABS Build Series PETG - bit.ly/MatterHackersBuildSeriesPETG PRO Series Filament - bit.ly/MatterHackersPROSeriesFilament NylonX Filament - bit.ly/MatterHackersNylonX Amazon 3D Printing Filament 1.75mm: PLA - amzn.to/3gsLE9Z PETG - amzn.to/3pXjjvu ABS - amzn.to/3wsTRjS ASA - amzn.to/2RX8dtM Polycarbonate - amzn.to/3cLdr38 Nylon - amzn.to/3iNGeI2 The first 1000 people to use the link will get a free trial of Skillshare Premium Membership: skl.sh/gomeowcreations06211 ________________________________________________ If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that. GomeowCreations.com/tools-and-materials GomeowCreations.com/partners-discount-codes *Note* Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍 ________________________________________________ Other Ways To Help Support The Channel: My PATREON ➜ patreon.com/GomeowCreations One time support ➜ paypal.me/gomeowcreations ________________________________________________ Instagram ➜ instagram.com/gomeowcreations/ Facebook ➜ facebook.com/GomeowCreations/ ________________________________________________ #Flashforge #Adventurer4 #3Dprinting #diy #gomeowcreations
Is it correct that you need to buy the whole nozzle set up? Can you take it apart and change the nozzle? Otherwise that's clearly a downside compared how cheap just a nozzle if for other machines.
What do you mean by a whole nozzle setup? Like the full hot end assembly? If so that's a no. They do have there own nozzles that you have to by if you want to switch them out that don't come apart that I know of. They are $27 each and $45 for the 265c one. I do thing they are expensive for nozzles but they are very simple to replace. I think this printer is more aimed for people new to the whole 3D printing thing, schools or businesses that don't want to deal with the printer. Basically you are paying for convenience. I hope that helps 😁👍
@@GomeowCreations Exactly what I meant..not the full hot end. Ok that's a bit of a downside...where i live the nozzle goes from 45-55 dollars...that's inlcude shipping. Maybe they work for a very long time...i don't know and i hope so...that can be a bit of a game changer. Otherwise the machine seems good and easy to operate. Thx for your reply and thx for your help 👍
Did you have any problems with pla printing at the default temp setting of 210c ? I use flashforge software and my prints are easily broken apart. I'm using the roll of filament that came with the printer and I noticed the test files for pla temp settings are 215c. Could I be printing to cold causing my models to break easily? I never had this problem with my adventurer 3c. Thanks for any advice.
Hey Randy, I have a random question... What size Nano blade would you suggest be used to cut a Canadian penny that is 1.45mm thick? I'm just starting out with a saw and I'm going to use pennies to practice with but I don't know exactly how to figure out what gauge a penny is (I don't have a gauge finder) so I'm not sure which blades I should get. Your help would be greatly appreciated. Thanks!
I would use a 1/0 or 2/0 depending on the details you are needing. 1/0 will cut it faster but the 2/0 will have finer teeth. You can even used 3/0 or 4/0 if your have very sharp or small details that you need to cut. Basically you will have to try it out but I hope that is some helpful info. 😁👍
Flashforge Adventurer 4 - amzn.to/3F2sAZ3
3D Files:
Modular Hex Drawers - www.thingiverse.com/thing:1743145
Heart Shaped Ring Box - www.thingiverse.com/thing:3849577
3DBenchy Boat - www.thingiverse.com/thing:763622
MatterHackers 3D Printing Filament 1.75mm:
Build Series PLA - bit.ly/MatterHackersBuildSeriesPLA
Build Series Silky PLA - bit.ly/BuildSeriesSilkyPLAMatterHackers
Build Series ABS - bit.ly/MatterHackersBuildSeriesABS
Build Series PETG - bit.ly/MatterHackersBuildSeriesPETG
PRO Series Filament - bit.ly/MatterHackersPROSeriesFilament
NylonX Filament - bit.ly/MatterHackersNylonX
Amazon 3D Printing Filament 1.75mm:
PLA - amzn.to/3gsLE9Z
PETG - amzn.to/3pXjjvu
ABS - amzn.to/3wsTRjS
ASA - amzn.to/2RX8dtM
Polycarbonate - amzn.to/3cLdr38
Nylon - amzn.to/3iNGeI2
The first 1000 people to use the link will get a free trial of Skillshare Premium Membership: skl.sh/gomeowcreations06211
________________________________________________
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that.
GomeowCreations.com/tools-and-materials
GomeowCreations.com/partners-discount-codes
*Note* Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍
________________________________________________
Other Ways To Help Support The Channel:
My PATREON ➜ patreon.com/GomeowCreations
One time support ➜ paypal.me/gomeowcreations
________________________________________________
Instagram ➜ instagram.com/gomeowcreations/
Facebook ➜ facebook.com/GomeowCreations/
________________________________________________
#Flashforge #Adventurer4 #3Dprinting #diy #gomeowcreations
Can you print with pla plus with this printer
Yes you can.
what are the best print settings for this? my prints seem to be coming out wrong
Is it correct that you need to buy the whole nozzle set up? Can you take it apart and change the nozzle? Otherwise that's clearly a downside compared how cheap just a nozzle if for other machines.
What do you mean by a whole nozzle setup? Like the full hot end assembly? If so that's a no. They do have there own nozzles that you have to by if you want to switch them out that don't come apart that I know of.
They are $27 each and $45 for the 265c one. I do thing they are expensive for nozzles but they are very simple to replace.
I think this printer is more aimed for people new to the whole 3D printing thing, schools or businesses that don't want to deal with the printer. Basically you are paying for convenience.
I hope that helps 😁👍
@@GomeowCreations Exactly what I meant..not the full hot end. Ok that's a bit of a downside...where i live the nozzle goes from 45-55 dollars...that's inlcude shipping. Maybe they work for a very long time...i don't know and i hope so...that can be a bit of a game changer. Otherwise the machine seems good and easy to operate. Thx for your reply and thx for your help 👍
Would've liked to see how the camera functions, as the ADV3's one was quite laggy and made people install their own camera instead.
How often should the hepa filter be changed? Manual say every 2 weeks if a 3D printer is used frequently.
Probably every two weeks if you are going to follow the manual. You can also just take it out and ad a vent to it that will go outside 👍
Did you have any problems with pla printing at the default temp setting of 210c ? I use flashforge software and my prints are easily broken apart. I'm using the roll of filament that came with the printer and I noticed the test files for pla temp settings are 215c. Could I be printing to cold causing my models to break easily? I never had this problem with my adventurer 3c. Thanks for any advice.
Yeah I have had that same problem. I have to print 5 to 10c higher than normal to make it print probably
@@GomeowCreations thanks I'll try that tonight
Hey Randy, I have a random question...
What size Nano blade would you suggest be used to cut a Canadian penny that is 1.45mm thick? I'm just starting out with a saw and I'm going to use pennies to practice with but I don't know exactly how to figure out what gauge a penny is (I don't have a gauge finder) so I'm not sure which blades I should get. Your help would be greatly appreciated. Thanks!
I would use a 1/0 or 2/0 depending on the details you are needing. 1/0 will cut it faster but the 2/0 will have finer teeth. You can even used 3/0 or 4/0 if your have very sharp or small details that you need to cut. Basically you will have to try it out but I hope that is some helpful info. 😁👍
The best guideline for deciding on blade thickness is to choose a saw blade with two or more teeth for the thickness of the metal being sawed.
What would be the best way to stop prints coming coming off the bed
Make sure it's level
Your channel is very wonderful, so I hope to add the Arabic language in the translation list so that we can continue. I wish you success and thank you
Sadly I have no way to do that. 😅
Do a revue like this for the I-fast
They would have to send me one and I would have to find the time to do it as well 😅