For more course information , please check: bit.ly/2Z7iS4V Q&A with REWA Team, please like and stay tuned to our FaceBook page: REWA Technology ( bit.ly/2VgpX1U )
Thanks a lot, seriously. I have an iPhone 7 stuck with error 4013 for almost a year now, 3utools stops at 19% Everytime or returns error -2 in iTunes mode. I'm going to try restoring again with disconnected modules. Also, do you have a place where you repair phones, I'd like to send my phone for a fix if I can't restore it.
The importance of "prosess of elimination" should never be underrated in electronic repair. Knowing board layout, how each component is grouped and connecting to the next group is the key to good troubleshooting. The quicker the technician understands this the more accurate the diagnosis will be!
My iPhone X just got this error a few days ago, after simply being splashed by a wave. Lost over an hour of videos, & tons of in-app drafts for various social media. "Rare" is funny to me - I'm the only one whose iPhone couldn't take a splash of water? Maybe.
Mine did the same after water damage. I opened the device and cleaned with alcohol and it’s back alive again. The Face ID however doesn’t work. It says move iPhone higher / lower during Face ID setup. Proxy & light sensor also work fine. Will reflowing this fix it ?
My iPhone 6 is not power on when the Touch ID cencer when counted to the mother bord and when I removed the censers then my iPhone on power on what was the problem
I got it to work !!! Main I looked up soooo many videos and tried the hard reset (pressing volume up then down then the power button ) , I plugged it into iTunes, it went into recovery mode i tried to update it, it didn’t work so I tried to restore it which means I would lose all my pics and info that weren’t backed up. After 50 tries and getting error code 4013 everytime I was willing to compromise on anything !! And wala... I was doing the right step all along but error 4013 often means faulty usb or the laptop that you’re using is not updated . So I hunted down an unbroken “original” apple usb , ensured the windows on the laptop was updated (I don’t own a MacBook so I used windows) . I plugged it in .. did the same steps ... “update” it but when that failed I then attempted to “restore and update”.. at first try it still didn’t work so I was instructed to use another USB port on the same laptop and bam.. just like that it came back on . So it took like 2-3 attempts but it worked . So remember you NEED an original apple charger and an updated laptop with iTunes . Please let me know if it worked !
This doesn't seem rare to me. Thanks to the video, I'm able to fix two phones with same problem. Both occurred some time after a refurbished screen replacement. And bezels of both screen have detached from screen. Very likely to be caused by moisture getting in through the gap.
For more course information , please check: bit.ly/2Z7iS4V
Q&A with REWA Team, please like and stay tuned to our FaceBook page: REWA Technology ( bit.ly/2VgpX1U )
Amazing
Can you please make video about error 9 iTunes during restore.
Phone won't turn on stuck and reboot at iTunes logo.
Thanks a lot, seriously. I have an iPhone 7 stuck with error 4013 for almost a year now, 3utools stops at 19% Everytime or returns error -2 in iTunes mode. I'm going to try restoring again with disconnected modules. Also, do you have a place where you repair phones, I'd like to send my phone for a fix if I can't restore it.
feel toofree Nandflash problem
Y-MobiTech YMT error 9 Sometimes CPU or Nandflash
Can you provide iPhone aur Samsung lcd original flex cable
The importance of "prosess of elimination" should never be underrated in electronic repair. Knowing board layout, how each component is grouped and connecting to the next group is the key to good troubleshooting. The quicker the technician understands this the more accurate the diagnosis will be!
Thank you for taking the time to share your thought :)
Super . Thank You
Congratulations rewa technology good perfect work 👍👍🥳🥳🥳🥳😍😍👏🙏👍👍👍
Fantastic fantastic job,love love you videos.
I love your intro. why you are mentioning in the description to skip?
Thank you 😊 rewa 👍🏻👍🏻👌🏻👌🏻🥰🥰
👍🏻awesome
nice work
muito obrigado pelas informações. parabéns pela clareza dos videos .
Thanks for your watching and feedback :)
So much knowledge n so much in detail. Thx a lot for your support
Nice 👍🏾
I wonder... if it’s so rare... why have I fixed this problem on at least 50 handsets 🤔😳
Thanks for the video though 👍
My iPhone X just got this error a few days ago, after simply being splashed by a wave. Lost over an hour of videos, & tons of in-app drafts for various social media. "Rare" is funny to me - I'm the only one whose iPhone couldn't take a splash of water? Maybe.
@@hannahjacole How did you fix it? Sorry, it's been a year :)
Is there a solution for Apple logo bootloop / iTunes error (75)?
Thanks good video
Good job
I had a phone 2 days ago in my shop that had this issue
Thank you sir
Hello sir
i have tried disconnecting both front speaker & c.port but still get error HELP!
You are pro bro ?
I like it
Could 3u program link face id and touch id of they were replaced and not repaired?
no
Mine did the same after water damage. I opened the device and cleaned with alcohol and it’s back alive again. The Face ID however doesn’t work. It says move iPhone higher / lower during Face ID setup. Proxy & light sensor also work fine. Will reflowing this fix it ?
after reballing iphone 7 cpu not turning on everything was perfect after reballing but not getting on .help me
Same issue coming in iPhone 7 Plus,disconnect air piece camera sensor cable it will work
Sir i also want this training in india is it possible to do so. if possible please tell me
REWA Academy has been launched, please feel free to visit the website for experiencing free training case course.
( academy.rewa.tech )
Thank you :)
awsome
My iPhone 6 is not power on when the Touch ID cencer when counted to the mother bord and when I removed the censers then my iPhone on power on what was the problem
Start by replacing the home button, then the long home button flex which connects the home button with the logic board
The soldering is a bit extra
What's the temperature to remove it?
250
I got it to work !!! Main I looked up soooo many videos and tried the hard reset (pressing volume up then down then the power button ) , I plugged it into iTunes, it went into recovery mode i tried to update it, it didn’t work so I tried to restore it which means I would lose all my pics and info that weren’t backed up. After 50 tries and getting error code 4013 everytime I was willing to compromise on anything !! And wala... I was doing the right step all along but error 4013 often means faulty usb or the laptop that you’re using is not updated . So I hunted down an unbroken “original” apple usb , ensured the windows on the laptop was updated (I don’t own a MacBook so I used windows) . I plugged it in .. did the same steps ... “update” it but when that failed I then attempted to “restore and update”.. at first try it still didn’t work so I was instructed to use another USB port on the same laptop and bam.. just like that it came back on . So it took like 2-3 attempts but it worked . So remember you NEED an original apple charger and an updated laptop with iTunes . Please let me know if it worked !
Sir iphone icould problem solving plssss
This doesn't seem rare to me. Thanks to the video, I'm able to fix two phones with same problem. Both occurred some time after a refurbished screen replacement. And bezels of both screen have detached from screen. Very likely to be caused by moisture getting in through the gap.
My phone i Phone 6plus Stuk Apple Logo any suggestions Please
yo guys I had the same issue & @itotalunlock on instagram helped me fix it, send them a message asap
I have the same problem on iPhone 5s
probably Bad NAND
i. m.form bangladech
3uTools free program?
yes
iclound unlocking in iphone
a thusand thanks
I had this same problem with my 11 pro max! It is called bootloop!! Just connect the phone to iTunes and restore it! Nothing to do with hardware!
Bangladesh available no servicing
Well I Centre servicing my coriander local server server see crazy
Кстати, всех же надоела эта хрень с загрузкой айфона только 200мб я нашёл способ в настройках
I have the same problem on my iPhone 6s plus
It could be the front facing camera flex cable. try without it
Ya same with front camera flex device not get started and without flex device started normally
yo guys I had the same issue & @itotalunlock on instagram helped me fix it, send them a message asap
Mntap bang
Your pc windows
i had the same problem with my iphone x the repair guy told me ic in motherboard needs repair and he took 100$ for the repair.
yeah I was told the something exept 150
Sand me our baground music
common issue when you play with water
можете мне помочь разблокировать icloud
Lol this happened to my iphone 2 days ago
So now Apple is putting their phones on error only for such a small issue!?
This shouldn't be legal.
Erm, the Face ID is highly secure, which means it’s plugged directly to the CPU. Now try n’ short some pins on a CPU and lets see what happens..
wooooow
you have a problem in the Arabic translation ..just don't use google translation
Thanks for your feedback and we will keep improving the experience :)
😍😘
Bangladesh available no servicing