Tools & Tips Tuesday #1: Why use a Pre Drill and Countersink Bit.
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- Facebook: / pa. .
Check out our new website: jonpeters.com/
Learn to pre drill and use a countersink bit to prevent wood from splitting. This is a our first in an ongoing series of Tools &Tips videos where we'll answer your questions and show you the woodworking and art tools we use and some useful tricks of the trade. Thanks for all of your input and questions and keep them coming!
Thanks for the videos Jon. As far as all the back seat woodworkers go , i dont know what to tell you other than you shouldnt have to explain yourself to people who havent built or done half the stuff you have. Your work is excellent , we all have are own likes and dislikes. Thanks again JOE
Thanks Joe
For the past 3 or so years I've been watching woodworking videos for project ideas and to improve my skills more quickly. I found one of yours about a month ago for the first time and must say I'm impressed. The quality of your videos and your explanations are top notch. It's just too bad I didn't think about ripping a countertop and using biscuits to put it back on a la your vanity top. (Luckily no one notices the corner flaw but me)
Lastly I watch videos of projects I will never build because the woodworker may/will use an interesting technique or offer a great tip. Tools and tips will be very useful for me and I'm sure to other new woodworkers.
Thanks Jon.
Thank you Penny I really appreciate your comment, have a great day
Its good to get back to the basics some times. Thanks for posting.
you got it, thanks for the comment
I think it looks brilliant & the splash Bach is a nice idea !
Thanks Mike
Good info, Jon. I think another pro of using the palm sander for finer grits is the lower cost. Like you said, you can get 4 pieces from one sheet, and the finer grit paper needs to be replaced more often, as it tends to wear faster than a rougher grit.
good point Nick, thanks for the comment
The "countersink" bit is a good idea. Did you also know that the bit you used is part of a drill bit/screw driver bit combo? The kit includes a holder that fits into the drill chuck and has a quick change lock that allows the combo to be reversed during use. The holder also has a built in hex tool (on the end that fits into the drill chuck) for the hex screws on the bits themselves. This allows replacement of the drill bit, and the driver tip (i.e. Phillips, straight, socket, etc.). There are several brand names (Craftsman, DeWalt, Kobalt, etc.) that sell them. Package kits also come with various sizes of countersinks. These have been a time and labor saver on many projects. (from $15 to $30).
I totally agree about using the palm sander over the orbital. More control, better job. Thanks.
My countersink combo is on its way. But for those of us that are not serious woodworkers - is there a way to make or buy plugs without going out and buying a press drill? The #8 that you like is 11/16th's so would I have to find a company that sells 11/16th's pre-made plugs? can we use a hand drill to make plugs and just buy the bit?
Jon thanks for the video. I bought the Dewalt countersink bit you use in this video, but the countersink does not work? (The bit stops turning when it reaches the countersink part) Any advice?
Can I ask you a question?
Are you using screws larger than the size of the hole, or just the same size?
And what about the depth of the hole?same of the lenght of the screw?
Thanks a lot!
I like that backsplash because it complements the sink shape.
Thanks man, yeah that's what I was thinking.
I think ripping and reattaching the top is a great idea because the biscuit jointer makes it really easy for you to glue it back up. Without one I would have done the extra work to cut out the notched piece with a jigsaw.
I agree the rounded corners compliment the curve of the sink. Without them the entire piece would be hard angles except for the sink.
Thanks, appreciate the comment
I'm not sure if you already mentioned what type of wood the counter is made of?Thx for the tip Jon!!
Hi Abel, I'm using Cherry
Always good info.
Thanks Nick
Like the TTT. Foam brushes create too many bubbles for me but obviously you use them and therefore don't seem to have that problem? Thanks for sharing.
Your welcome, thanks for the comment.
I always thought using screws in woodworking was blasphemy. I was wrong! :) I like the top with the backsplash a lot. It IS really usefull ... Previously I had one without a backsplash and it got really dirty fast! I'm wondering how you will seal the void between the sink and the top so water/moisture doesn't go in the endgrain of the top. Sillicone? Take care! Sam
I'm not sure yet Sam, but will know by Friday. This is the first sink I've set in a long time.
Too many hard lines look too commercial. Agree, curved lines soften the appearance.
Useful as always tbanks jon
Another great, helpful video. thank You!
helpful tips and information, thank you.
Thank you for your tips.
Hi Jon, greats videos. I've followed through all of the vanity videos and can'y find the details of how you finished the counter top. Did you just use a polyurethane varnish to make it water proof?
thank you
Great video! Jon, I use a lot of #8 and #10 screws. What size bit would you recommend i use to pre-drill ?
gli attrezzi fanno il maestro.
I like those softer bottoms too :)
LOL, I was thinking the exact same thing during the video.
Ha.. no comment : )
actually the finish sander will get you a smoother finish as the orbital is more aggressive even though the grit is higher but the orbital is more aggressive
Good info
If I want to have one countersink, what size should I get?
Hi Jon, Excellent video, as always!
Another fine tool for countersinking etc. is the Rockler Insty-Drive 18 Piece Self-Centering & Countersink Set, Item #: 69045. It has the advantage of drilling and countersinking at the same time, plus instant power screwing by slipping an adapter over the drill/countersink bit. Another function is the self-centering bits for installing hinges.
See the videos at www.rockler.com/rockler-insty-drive-18-piece-self-centering-countersink-set
Thanks Don and great info...I'll be sure to check this set out.
Hey Jon. Love the channel. Been going through the archives - I love the pacing, camera work and detail shots of your process. Gets me excited to get in the shop!
Quick question - just bought a countersink drill bit set and when I press the bit into the wood the countersink part stops moving. Should I not be pushing down?
Thank you!
Hi....saw your question and thought I could help. Look at the bit...the black plastic section. You will find two holes on either side, these need to be tightened with an Allen wrench. You will see immediate results!
Hi....saw your question and thought I could help. Look at the bit...the black plastic section. You will find two holes on either side, these need to be tightened with an Allen wrench. You will see immediate results!
+TheSuncatcher1 Thanks!
Countersink saves a lot of time and frustration.
Sure does, thanks for the comment Gary
Can you use that countersink drill bit on sheet metal to get a wood screw to sit flush?
Yes with a good bit
In India, please send the address to purchase the bit
I actually thought ripping the 4 inches off, cutting it clean and re-attaching was genius...you got a much better result with less work.
Thanks Adam, works great
I know this video is years old, but I'm hoping you can answer, what do you finish the top with so that it doesn't get ruined by the years of kids splashing as they wash their hands and brushing teeth and all that?
I did mine with sealant like the kind you'd use for a deck. After helping someone finish their pool deck they had some left over and said I could have it. Kept it around a while, decided to redo kid's sink, and slapped a good solid coat of sealant on there per directions. Looks good, and it's been used for 3 years now only by kids.
Please get a wearable microphone so that you don't sound like you're in a barrel.
.