You make it look so easy lol . I try to wrap my F-150 and I buy a piece of wrap from Amazon, 5x9 cost me around $65 dollars, but unfortunately for me even with all the 10k reviews on Amazon 4.5 starts . I found out that the wrap that you used is better or different form the one I buy. Cuz the one I buy it is “IMPOSSIBLE” to work with! I try to do what you do in the video but that mirror effect you said in the video. I never get it lol all I get was a lot of wrinkle all over the wrap and there was no way that I would do it with that wrap. To all who trying to wrap you car out there, do a research before buying the wrap cuz you do not Want to loss you money🤷♂️ good video 👍
What kind of wrap is this? Does it not require water to put it down? Also how did you get the grooves to lay flat im about to do mine. What size did you order also. Sorry for all the questions.
Hello James, this wrap is Avery Gloss Black. It doesn’t need water because there are air channels on the adhesive side of the wrap for the air to escape and not bubble up. On the grooves heat it up a little and shape it into the groove with your finger. The size for that was about 5ft x 7ft
Depending on the sun exposure on the wrap. This truck is in NY so you will not be able to, it’ll look the same. If a car is from Arizona/Texas where the sun is really intense, some paint fading will happen on the paint that’s exposed
@@DarkZeroMotors if the job doesn’t have to be 100% perfect can you just wrap and cut around the antenna rather than go inside and remove it? My antenna is not a shark fin it’s just a flat one. Great video!
If you’re considering doing this yourself, don’t it’s hard as hell this video is misleading 😂 I’ve done roofs on a 2019 mustang and a wrx with a sun roof this is the worst one ducked up the wrap
I agree with you Luis B, this is the biggest scam in the planet lol I try two times already with no susses. He make it see so easy lol the harder part is when you try to remove the bubbles😡😡 forget about that 😂😂 on the video he show the part when he stretch the wrap and then magic and the power of edit the wrap is on lol good for you bro 👍👍 but if someone is trying to do it for the first time( DO NOT WAST YOUR MONEY AND TIME ON THAT) lol you will spend less money paying to someone to do it for you than you do it your self. Trust me on that 👍😂😂
Thanks for the video and replying to all the questions very helpful
No problem. I always try to get to all of the comments!
Real nice work!!💯 I need to get my 2018 xlt roof wrapped.
Thanks! I’m in GA 🍑
You make it look so easy lol . I try to wrap my F-150 and I buy a piece of wrap from Amazon, 5x9 cost me around $65 dollars, but unfortunately for me even with all the 10k reviews on Amazon 4.5 starts . I found out that the wrap that you used is better or different form the one I buy. Cuz the one I buy it is “IMPOSSIBLE” to work with! I try to do what you do in the video but that mirror effect you said in the video. I never get it lol all I get was a lot of wrinkle all over the wrap and there was no way that I would do it with that wrap. To all who trying to wrap you car out there, do a research before buying the wrap cuz you do not Want to loss you money🤷♂️ good video 👍
Thank you!!
Why did you cut the process of filling the channels with vinyl?
Very good question. I probably thought it would be too boring to watch for the viewers or make the video too long at that point of time or camera died
After that excellent wrap the third brake light needs to be replaced with a smoked third brake light.
I believe it was eventually replaced
How does the wrap hold up against car washes?
The best car washes for wrap are touchless ones. Hand washing the car is also great, which what I personally do
Thanks you asked my question 🙋♂️ 👍
Did you wrap the antenna to match or are the shark fin antennas a pain to wrap around all the angles?
If I remember correctly it was made out of ABS plastic
What kind of wrap is this? Does it not require water to put it down? Also how did you get the grooves to lay flat im about to do mine. What size did you order also. Sorry for all the questions.
Hello James, this wrap is Avery Gloss Black. It doesn’t need water because there are air channels on the adhesive side of the wrap for the air to escape and not bubble up. On the grooves heat it up a little and shape it into the groove with your finger. The size for that was about 5ft x 7ft
I had the same questions except for the water part. How much better is Avery over 3m and why?
I personally like both. Avery is more user friendly, the way it lays and stretches. They’re both great brands though
How much wrap did you get to get that amount of hangover?
Don’t exactly remember how much exactly but about 7ft would do the job!
How much did you charge them? Just wondering
If I remember correctly it was 350-400, and it was before Covid prices
@@DarkZeroMotors before covid prices LOL
How much does this run, wrap and install. Wanna do the same for my truck, same truck.
Get in my inbox and I can get you a quote!
How do you cut it ? With out scratching the car
Always having a fresh blade and its all in the pressure of the blade
Thanks for the video🙏
Yes of course!
@@DarkZeroMotors just did our first one today! Went very well!
I’m glad!
How long does this wrap last ?
If taken care of you can get a good 6-7 years
@@DarkZeroMotors thanks
@@dint356 when you say taken care of?what does that entail? Washing regular,waxing once in awhile?
Regular hand washing, UV protective sprays, ceramic coatings help as well and just being mindful that the car is wrapped
@@DarkZeroMotors Thanks
When you remove the wrap can you see a difference in the paint that wasn’t wrapped?
Depending on the sun exposure on the wrap. This truck is in NY so you will not be able to, it’ll look the same. If a car is from Arizona/Texas where the sun is really intense, some paint fading will happen on the paint that’s exposed
how to remove the antenna
Have to go inside of the cabin and drop the headliner. It unscrews and unplugs from there
@@DarkZeroMotors if the job doesn’t have to be 100% perfect can you just wrap and cut around the antenna rather than go inside and remove it? My antenna is not a shark fin it’s just a flat one. Great video!
Hey Adam, yes there is a way of doing it without removing the antenna. It takes good alignment thats all to it!
If you’re considering doing this yourself, don’t it’s hard as hell this video is misleading 😂 I’ve done roofs on a 2019 mustang and a wrx with a sun roof this is the worst one ducked up the wrap
It’s not that bad lol practice makes perfect
did you try try again?
I agree with you Luis B, this is the biggest scam in the planet lol I try two times already with no susses. He make it see so easy lol the harder part is when you try to remove the bubbles😡😡 forget about that 😂😂 on the video he show the part when he stretch the wrap and then magic and the power of edit the wrap is on lol good for you bro 👍👍 but if someone is trying to do it for the first time( DO NOT WAST YOUR MONEY AND TIME ON THAT) lol you will spend less money paying to someone to do it for you than you do it your self. Trust me on that 👍😂😂
Horrible idea and really.
I’m sorry that idea wasn’t satisfactory enough for you