Will the same way you wired the park neutral safety, reverse wiring etc. Work on a 98-2002 Accord auto to 5 spd swap .Also with the 5 speed ecm do I need to get it reprogramed
For the 96-98 they are called obd2a and for the 99-00 civics(99-01 tegs) they are called ob2b ecu connection. All 96-00 civics are not the same, if everything plugged up and works and you have a small plug from harness left, that’s you automatic transmission plug. We changed our completely to a 92-95 obd1 ecu so we’d have tuning capabilities. Hope that helps
Man i ain’t trying to be no asshole, but you if you got that sombitch out the car, pressure wash or clean that damn thing. 😂 I found it helps, plus if you have a leak after all is said and done, you can find her fast.
Lol yes it absolutely does! My pressure washer literally blew up a few days before. That’s why we had to clean the shell bay at the car wash. He had just cleaned the bottom of that pan and trans about a week or so before. The way the previous owner welded/jb welded 🤦♂️the bung on the pan it was making a mess. He wanted to wait till the moroso oil pan got here to clean it again since he was gonna be driving the car before it came in checking for any problems in the hatch body. It has done well for him so far.
is that the only way to wire up reverse lights? could i connect from the c101 plug straight to the yellow and green on the shifter plug?
Will the same way you wired the park neutral safety, reverse wiring etc. Work on a 98-2002 Accord auto to 5 spd swap .Also with the 5 speed ecm do I need to get it reprogramed
Good job but what about the
ecu
Intake manifold
My thoughts exactly lol
What engine harness you use
Did you change the ecu? I just got a manual ecu for my hatch but all but one of the connectors dosent fit
For the 96-98 they are called obd2a and for the 99-00 civics(99-01 tegs) they are called ob2b ecu connection. All 96-00 civics are not the same, if everything plugged up and works and you have a small plug from harness left, that’s you automatic transmission plug. We changed our completely to a 92-95 obd1 ecu so we’d have tuning capabilities. Hope that helps
@@i4boosting328 this helps so much I was so confused on what it was for thanks so much for the help I can finally get my car running 🙏🙏
Man i ain’t trying to be no asshole, but you if you got that sombitch out the car, pressure wash or clean that damn thing. 😂 I found it helps, plus if you have a leak after all is said and done, you can find her fast.
Lol yes it absolutely does! My pressure washer literally blew up a few days before. That’s why we had to clean the shell bay at the car wash. He had just cleaned the bottom of that pan and trans about a week or so before. The way the previous owner welded/jb welded 🤦♂️the bung on the pan it was making a mess. He wanted to wait till the moroso oil pan got here to clean it again since he was gonna be driving the car before it came in checking for any problems in the hatch body. It has done well for him so far.