It helps to put a blob of sealant where the gasket meets the curved parts of the cylinder head as it can leak from them areas. Them cam followers look fine as long as there ain't no scoring marks 👍 Good job lads
I believe im having the same issue with my 2012 jcw. It has a boost leak due to cracked valve cover. Before you replaced the valve would the idle kind of blip randomly?
On my N14 (R55 S), I'm gonna try an aftermarket cast ALUMINUM valve cover (powder coated color choices-silver, red, black, blue) for the same price as an after-market plastic version. Will avoid plastic cover warping issue, I would imagine. Will still use hi-temp RTV gasket sealant in the 2 or three halfmoon/corners of the gasket areas of the ALU valve cover, prior to placing it on the motor. Will also follow the standard torque and order guidance (for the 13 bolts; 7.5 ft-lbs). The garage did a shitty job on the last valve cover replacement. I will do it right and by myself. Current plastic version leaks, smells...a mess. I think they did not use any RTV...frigging idiots.
![[LIVE] : ONE ลุมพินี 91 | คู่เอก "คมอาวุธ vs อเล็กเซย์"](http://i.ytimg.com/vi/V0RkEfYFsgM/mqdefault.jpg)
It helps to put a blob of sealant where the gasket meets the curved parts of the cylinder head as it can leak from them areas. Them cam followers look fine as long as there ain't no scoring marks 👍
Good job lads
Also the pcv valve is part of the rocker cover and if it fails it can cause a vacuum leak/ boost issue
He looked at it after we finished up and he said there was a hairline crack in it pal 👍
What brand wheel,offset and size are those black wheels
I believe im having the same issue with my 2012 jcw. It has a boost leak due to cracked valve cover. Before you replaced the valve would the idle kind of blip randomly?
You guys crack me up 😂 "tight as a whistle" ! Did you use gasket seal ? And defo get a torque wrench !!! Great vid again mate 👍
nah no sealant pal :)
How does it not leak without a gasket? It had one on the original cover.
I've only just got into watching Danny dc2 got mint BMW 👍
Shame he’s just deleted his Chanel
Christ. I’m all for DIY but that’s scary stuff mate, as you say!!
Where could I order a cam cover for a R56 N12 engine please?
mini direct maybe
@@JustbeingHayden many thanks mate
On my N14 (R55 S), I'm gonna try an aftermarket cast ALUMINUM valve cover (powder coated color choices-silver, red, black, blue) for the same price as an after-market plastic version. Will avoid plastic cover warping issue, I would imagine.
Will still use hi-temp RTV gasket sealant in the 2 or three halfmoon/corners of the gasket areas of the ALU valve cover, prior to placing it on the motor.
Will also follow the standard torque and order guidance (for the 13 bolts; 7.5 ft-lbs).
The garage did a shitty job on the last valve cover replacement. I will do it right and by myself. Current plastic version leaks, smells...a mess. I think they did not use any RTV...frigging idiots.
First