Opel / Vauxhall Corsa D 1.2 throttle body removal

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ส.ค. 2024
  • Opel / Vauxhall Corsa D 1.2 Z12XEP throttle body removal.
    Tools needed:
    hexagonal socket 7 mm
    torx socket T30
    pliers

ความคิดเห็น • 47

  • @andras9211
    @andras9211 ปีที่แล้ว +2

    Hallo Mate! EGR valve cleaning please!!!!

  • @days3348
    @days3348 4 หลายเดือนก่อน +1

    The inlet at 4:43 is very oily and dirty on mine, any idea on what i should use to clean that? Also noticed oil in the air intake pipe, coming from that thinner flexible pipe connecting to the top right of the engine, what does that one do and why am i getting oil in the intake?

    • @CorsaDForever
      @CorsaDForever  4 หลายเดือนก่อน

      It's good to clean it. Carburetor cleaning solution or brake cleaning spray. The oil vapors reach through the short and thick hose to the accelerator sometimes and to the air filter. It happens especially in the colder season, when the oil vapor condenses a lot. You probably make a lot of very short trips.

  • @pataleno
    @pataleno 2 ปีที่แล้ว +2

    Do you have a video on cleaning this ? Did you just clean the body or does the engine side need cleaning. Sorry never done one of these before so worried I may screw it up. Just bought a bottle of throttle cleaner.

  • @jamesvideoland
    @jamesvideoland 9 หลายเดือนก่อน +1

    Hello mate, is this the LMM between the Air filter and the Acc-Throttle? But the Plug has only 2 Pin? Actually the LMM has 5 Pins, right? So what Part is this?

    • @CorsaDForever
      @CorsaDForever  9 หลายเดือนก่อน

      It is an air temperature sensor.

    • @jamesvideoland
      @jamesvideoland 9 หลายเดือนก่อน

      Thank you 😊

  • @mattbarker581
    @mattbarker581 3 ปีที่แล้ว +1

    Like these videos, I have a Corsa D myself, find them useful!
    Could you make a video on installing a kill switch for the corsa? Seen other videos on kill switches but not specifically for the corsa

    • @CorsaDForever
      @CorsaDForever  3 ปีที่แล้ว

      Thanks for waching. I don't have that in plan. I would not recommend, everytime you kill the power more than 20-30 minutes it will reset the ECU settings, so after every start the engine have to learn again. Without curent you won't be able to open the car with the remote.

  • @vuckovicdragan1732
    @vuckovicdragan1732 2 ปีที่แล้ว +1

    Please show as how we can cleaning a injectors on corsa d 1.2 😕

    • @CorsaDForever
      @CorsaDForever  2 ปีที่แล้ว

      For now, I have no problem with injectors. Injectors rarely fall on this engine. Are you sure they are the problem? What are the symptoms?

  • @grrad76
    @grrad76 3 วันที่ผ่านมา

    Is it possible to clean it with throttle body cleaner spray without removing it totally? Would you recommend that process considering my opc d 1.2 2006 with 173k km. ?
    Thx in advance

    • @CorsaDForever
      @CorsaDForever  3 วันที่ผ่านมา +1

      @@grrad76 Yes. You can do it. You can open it with your hand to clean the intake side.

  • @dylans351
    @dylans351 ปีที่แล้ว +1

    Hello mate, my Vauxhall Corsa D has a problem, it keeps revving up small amounts on its own, and it takes a while for the revs to come down. All the sensors have been changed, and I have cleaned the throttle body, is there a chance my throttle body is faulty? Very helpful videos by the way!

    • @CorsaDForever
      @CorsaDForever  ปีที่แล้ว +1

      Hi. See how the evap valve is working. Especially if you have a facelift Corsa. Take it off and see if you can blow air throu it, you shouldn't.

    • @dylans351
      @dylans351 ปีที่แล้ว +1

      @@CorsaDForever So if I can’t blow air through it, it means it is working fine? Also if this is not the problem, does that mean the throttle body is faulty?

    • @CorsaDForever
      @CorsaDForever  ปีที่แล้ว +1

      If you blow air it is faulty. If it is ok, check first for other vacuum leaks causes.

  • @Fabio-Ferreira
    @Fabio-Ferreira ปีที่แล้ว +1

    Can you please tell me where is located the pcv valve? Thanks

    • @CorsaDForever
      @CorsaDForever  ปีที่แล้ว

      There is no separate pcv valve. The engine cover has some passages in it thru where the oil is separated.

  • @MrFrankstanks
    @MrFrankstanks 2 ปีที่แล้ว +1

    hello i have a Corsa d 1.2 limited edition that has a slight misfire i replaced the spark plugs so it's either coil pack or my mate said give the throttle body a clean any advice, please.

    • @CorsaDForever
      @CorsaDForever  2 ปีที่แล้ว +2

      Most probably is the coil. The throttle body has nothing to do with the misfire.

  • @kharali3475
    @kharali3475 ปีที่แล้ว +1

    Hi mate, did you clean the the inside of the inlet manifold? My one looks like yours with oil and dirt inside

    • @CorsaDForever
      @CorsaDForever  ปีที่แล้ว +1

      I didn't clean it. Doesn't look very bad to me.

  • @simionmoldovan5087
    @simionmoldovan5087 ปีที่แล้ว

    BUNA ZIUA AM UN OPEL CORSA D 2008 1,2 BENZINA CAND ANCERC SA PORNESC MOTORUL MI SE APRINDE SI SE STINGE MARTORUL BATERIEI SI MARTORUL MASINA CU CHEITA SI MI SE OPRESTE MOTORUL! PE TESTER NU I-MI DA NICI-O EROARE; CARE SA FIE PROBLEMA?MULTUMESC

  • @djsaulmix
    @djsaulmix ปีที่แล้ว

    Hello, I have a Vauxhall Corsa Design 2008 1.4 Petrol and I checked for errors and I used OBD 2 and I got this code P1890 can you tell me what it means and what the problem is because I couldn't find a concrete result on google. Thank you, I am waiting for your answer!

    • @CorsaDForever
      @CorsaDForever  ปีที่แล้ว

      Hi. Before you start the engine put the ignition on and wait around 30 seconds. After this switch the ignition off, put it on again and start the engine. The throttle body it will calibrate itself. Try this first and see it solve the problem.

  • @Mikeybhoy1979
    @Mikeybhoy1979 ปีที่แล้ว +1

    Hi there, could you help me, had my car, vauxhall corsa D 2007, into the garage three times now, changed spark plugs and coil pack and thought problem was solved, then engine management light came back on, went back to the my local garage and their diagnostics came up as an o2 sensor code near the catalytic converter,, that was changed too and engine management light came back on again when driving away from the garage and same issue with 15 or so minutes into driving, it would at times struggle to accelerate, could it be the ERG valve (throttle body) as the problem?

    • @CorsaDForever
      @CorsaDForever  ปีที่แล้ว

      What error codes did you have? It's definitely not from the throttle

    • @Mikeybhoy1979
      @Mikeybhoy1979 ปีที่แล้ว

      @@CorsaDForever Going to put some redex in my engine to see if that helps with cleaning the fuel injectors and see if it helps any.

    • @CorsaDForever
      @CorsaDForever  ปีที่แล้ว +1

      This will most likely not help. Try to check if the MAP sensor is working properly. For this you have to monitor the values on the go on a tester.

    • @Mikeybhoy1979
      @Mikeybhoy1979 ปีที่แล้ว

      @@CorsaDForever Just took my car for a drive with 250ml of redex in the tank and it is running better for now, will check the MAP sensor too, thanks.

  • @rthughes5861
    @rthughes5861 9 หลายเดือนก่อน

    I am planning to remove and clean my throttle body on my 2009 corsa d 1.2, Do i have to bleed the cooling system after reinstalling it?

    • @CorsaDForever
      @CorsaDForever  9 หลายเดือนก่อน +1

      There's no need for bleed. Just try to keep the removed hoses as high as possible so they don't leak to much.

  • @simionmoldovan5087
    @simionmoldovan5087 ปีที่แล้ว

    AM INLOCUIT CLAPETA DE ACCELERATIE LA UN OPEL CORSA D 2008 MOTOR 1,2 59 KW SI ACUMA NU SE MAI ACCELEREAZA CU PEDALA DE ACELERATIE LA MAXIM TUROMETRU SE URCA NUMAI LA 2500 ROT. MIA RAMAS SI MARTORUL MASINUTA CU CHEITA CARE SA FIE CAUZA ? MULTUMESC

    • @CorsaDForever
      @CorsaDForever  ปีที่แล้ว

      Incearca sa scoti borna la baterie pentru 30 min. Dupa ce o conectezi la loc, pui contactul fara sa pornesti si il tii asa 30 de secunde timp in care se calibreaza clapeta, apoi iei contactiul si pornesti normal. Vezi daca isi revine asa.

    • @simionmoldovan5087
      @simionmoldovan5087 ปีที่แล้ว

      @@CorsaDForever MULTUMESC AM FACUT CUM MI-ATI SPUS SI A FUNCTIONAT

  • @hlepism
    @hlepism 8 หลายเดือนก่อน

    Do i have to disconnect battery before removal of throttle body?

  • @baset43
    @baset43 2 ปีที่แล้ว

    I have a Corsa D 2008, the engine is a chicken, what is the solution and why

    • @CorsaDForever
      @CorsaDForever  2 ปีที่แล้ว

      Please reformulate, I don't get it.

  • @kacper3887
    @kacper3887 2 ปีที่แล้ว +1

    I have a question, how did you mount it back, did you have to adapt something?

    • @CorsaDForever
      @CorsaDForever  2 ปีที่แล้ว +1

      For the XEP engines, after turning on the ignition, wait 30 seconds before starting the engine and that's it.

  • @mattbarker581
    @mattbarker581 2 ปีที่แล้ว

    1:22 is that the intake gasket? Mines weeping from that area think my gasket has gone

    • @CorsaDForever
      @CorsaDForever  2 ปีที่แล้ว +2

      No. At the end of the video you can see the gasket, the green one. Normally it should be on the intake hole, but remained stuck on the throttle body.

    • @mattbarker581
      @mattbarker581 2 ปีที่แล้ว +1

      @@CorsaDForever ah ok, so whats the gasket at 1:22 ? I'm not too sure what I'm dealing with tbh.
      I've been looking for a repair kit but cannot find one... might go to my Vauxhall dealer and see if they can order a set

    • @CorsaDForever
      @CorsaDForever  2 ปีที่แล้ว

      There is no gasket at 1:22. There is attached the air filter tube, with no gasket.

  • @zoransurla9245
    @zoransurla9245 3 ปีที่แล้ว

    TOP.....