Motor looks promising Leon, i see you've been down here in Jacksonville...snatching souls...congrats on your wins brotha, wish i could have met you as well participated. One Luv!
yessir, I've been up there a couple times for drag events, and took the W both times. completely forgot you were up that way. Come out next time for sure!
Hello sir I was thinking of going with kill mode so I want to build an arrma limitless and an infraction I just got the infraction yesterday. I want to build them for drag as well. I also have a typhon 6s with a mm2 esc and a castle 1515 motor for speed run. what cap packs would you recommend for all 3 and what motor for the limitless and infraction would you say? I want to run 6s I think I'm going to go with castle xlx or hobby wing max5 for both or 1 of each. please any advice would be great thanks? love the builds and the videos.
Joe Dingwerth hello Joe. Please send me a text message or email so we can chat. I’ll help you get setup proper. My number and email are on my website. Killmoderc.com
Hey bro I have you guys is kill mode 4070 2900 KV X Speck motor and I'm running it with the castle xlx 2 on my ArmaLimitless. What pac should I use for that and also should I run 6s or 8s. Thanks for everything you do. You da man
That motor is HUGE for 2900KV. I'm more of a 1/8 scale basher however, I'm thinking of making a dual moror speed build. I'm just starting to contemplate how I'd like to go about doing it. I was going to sell my DHK Maximus however that may be good platform. They way I've set mine up, the suspension is very tight. It would be more of a drag/drift type than top speed for obvious reasons. Any roller suggestions would be welcome for a project like that. The DHK Maximus build is only a thought as I have one.
I highly recommend a large scale esc to get the best performance. A mamba x will not be able to supply the power to optimize the motor and will heat up quickly.
Hey man nice line bro!! I am getting the infraction soon from my local hobby shop and want to get the kill mode 2900 drag motor for it along with the drag pac. However I have a lot to learn and am currently looking at ways this new motor would fit. Can you tell me is it possible to do without major surgery to my new truck? Im not asking for any benchmark secrets, just want to know that it can be done and would be fruitful. I want the fastest Infraction in my state without a doubt both drag and speed runs possibly the entire west coast. Arrma infraction with Kill mode together!! I can see it, can you?
Awesome stuff!!!! Expect nothing but the best from Mr. Killmode.. Definitely very nice edition to the line up of Killmode products.. 2900kv is gotta be a ripper for sure !!!! RCFL Brother 👊🏼💯⚙️🚀🥇
I have a question for you...I'm drag racing my arrma talion 132 ft and I have a 2900 tp motor...what is a good spur gear and pinion combo...I'm running 6s
Man great vid and products👌👍👊✌️You should post a video on how to tune your car based on the esc readings. I always test by trying and never messed with the software. I would not really know what to change or to stay in certain limits..
Not without modification. It's too long. Unless you plan on doing some very serious speed runs, there's no need. The new 4260CM in a 2610 KV is much better suited for 99.9% of what either of those rigs can be used for. The 4260CM will put down more power than you'll ever need, but it won't be so difficult to make the ESC survive.
Hi, I'm looking for a high quality motor for high speed, and I have seen that this engine is widely used for high speed. I would be very interested in one Motor, I live in Paris, you would send to France
Order your motor directly from TP Europe. No need to pay a ton of VAT and imports taxes. www.tppowereurope.com/Webwinkel-Product-173472093/TP4070CM--(Competition-Motor).html You can get it with the KV you want. If you want something not listed, just put the KV you want in the comments when placing your order.
Where can I purchase a kill mode cap pack
Vaughn Hopkins www.killmoderc.com
What is a “cap pack”?
@@killmoderc6815 Mart Reopen
Instablaster
Now that's a Come Back bruh Great job
Yessir! but I never really left!
Bruh you can't leave, we won't let you lol
I'm green with envy! Sweet looking motor- specs are sweeter.
we'll throw one in that Talion and see what it can do.
@@killmoderc6815 Just landed back in Florida. Let's do it 💪
I recently got one of your motors and I’m have some questions about gearing
I just got into drag racing. Love it . Thanks for the video
Can someone explain what "No Prep" drag means? I'm new to rc drag
How can I contact you
What’s the gearing
Man we just chit chatted on the phone the other day have to say you were very helpful.
Leon I'm getting back in the game. I just got a hobao vte. And I'm going to order this motor. But what size pinion and spool should I go with.
Will this fit my felony
Do you use the internal bec? The external just for fan/s?
Have you ever done over a dr10
I'm running 2.63, but that's 2s, and barely able to throttle in. Also 2wd
Was looking for info on running 8s with xlx and 2900kv kill mode?
Do you have any walk through videos on how to build your car
Just ordered mine last night, can’t wait to get it and set my Arrma Talion up.
I forgot to ask did you ever get film rotors for l4070 cans 2200
No prep on tires or no prep track?
What ESC you use.?
Great numbers, that 2900kv is looking like a winner
its a killer!
I am the one you called today about the motor I cannot wait 😎
Whats up bro im running a Traxxas xo-1 and i what like to know what motor you think i should use to get it to shoot out of the hole the fastest?
I jus got 40 out of 104 amazingggg motor brother I friggen love it got it on my gt habao and omg on 4s she screams love this build brother
To be clear drag racing is 1 on 1 speed runs is a solo run? Also is your short 6 pack as good as this long model?
So you can use this motor for not just speed runs?
Motor looks promising Leon, i see you've been down here in Jacksonville...snatching souls...congrats on your wins brotha, wish i could have met you as well participated. One Luv!
yessir, I've been up there a couple times for drag events, and took the W both times. completely forgot you were up that way. Come out next time for sure!
@@killmoderc6815 Yes Sir, i plan on it!!!
What transmitter you use
Good to see you back love your products that new motor looking good bro and that green machine behind you 👍🏾
They fear that green machine! they wish I was back in the speed runs!
@@killmoderc6815 😂😂😂
Will this motor work in a no prep drag slash
Hello sir I was thinking of going with kill mode so I want to build an arrma limitless and an infraction I just got the infraction yesterday. I want to build them for drag as well. I also have a typhon 6s with a mm2 esc and a castle 1515 motor for speed run. what cap packs would you recommend for all 3 and what motor for the limitless and infraction would you say? I want to run 6s I think I'm going to go with castle xlx or hobby wing max5 for both or 1 of each. please any advice would be great thanks? love the builds and the videos.
Joe Dingwerth hello Joe. Please send me a text message or email so we can chat. I’ll help you get setup proper. My number and email are on my website. Killmoderc.com
Where to buy a hobao gtb. I cant find them anywhere
Quick question.
If one orders a 4070CM 2900 kv motor directly from TP as opposed to from you, is there any difference other than the graphics?
Would this motor work good in a 2wd drag car
!Please can you teach me what i need to do 4 my car run straight like yours????R u using gyro or tsm system??Very nice!
Hey bro I have you guys is kill mode 4070 2900 KV X Speck motor and I'm running it with the castle xlx 2 on my ArmaLimitless. What pac should I use for that and also should I run 6s or 8s. Thanks for everything you do. You da man
How do i putt that motor to my traxxas slash i want to go fastt. But im a dune guy and dirt like offf roading
You know the duel motor setups for 4x4's? I would love to see for you to put two of those motors inside a 4x4 and i think others would love it too.
How can I get a 6’s killmode cap pack from
Is the x spec motor capable of 8s?
Hey I’m new to this hobby a few month in I bought this motor listen to this video what program card and ESC would you recommend?
definitely recommend and xlx or max5 for drag racing.
hello sir...can brushed use the cap packs?
What’s that body called or what is the part number foe it?
Good stuff right there, leo!
Is this motor capable of handling 8s
That motor is HUGE for 2900KV.
I'm more of a 1/8 scale basher however, I'm thinking of making a dual moror speed build. I'm just starting to contemplate how I'd like to go about doing it. I was going to sell my DHK Maximus however that may be good platform. They way I've set mine up, the suspension is very tight. It would be more of a drag/drift type than top speed for obvious reasons. Any roller suggestions would be welcome for a project like that. The DHK Maximus build is only a thought as I have one.
Sorry guys, I'm a noob. Do you have to run a big esc like a Castle XLX for set up like that or is Mamba X ok?
I highly recommend a large scale esc to get the best performance. A mamba x will not be able to supply the power to optimize the motor and will heat up quickly.
Impressive Mr. KMRC. I'm digging that set up. what transmitter is that?
Looks sweet. No data on the Bluetooth yet?
Can a arrma limitless be made into a gt drag car
Can you run mm2 with your motor for drag?? Or Does it need xlx?
Thank you
AZ Airgunner mm2 is a good esc, but will be slightly underpowered for this motor. Especially for drag racing.
Do you still offer the motor and cap packs?
Absolutely. Www.killmoderc.com
Hey man nice line bro!! I am getting the infraction soon from my local hobby shop and want to get the kill mode 2900 drag motor for it along with the drag pac. However I have a lot to learn and am currently looking at ways this new motor would fit. Can you tell me is it possible to do without major surgery to my new truck? Im not asking for any benchmark secrets, just want to know that it can be done and would be fruitful. I want the fastest Infraction in my state without a doubt both drag and speed runs possibly the entire west coast. Arrma infraction with Kill mode together!! I can see it, can you?
This is the one I'm ordering big bro niceeee
what is the max amps on that motor
Man, let us guys know if there is a supplier over this side of the pond for this stuff.
My 2700kv killmode motor set up with xl x esc and 3 pack cap esc keeps going out what could be causing this issue Leo? Help plz.
hit me up, and ill see if I can figure it out.
Thanks will do
I emailed you thanks again Leo.
Good stuff man, car looks good.
Great products 👍👍👍
Awesome stuff!!!! Expect nothing but the best from Mr. Killmode.. Definitely very nice edition to the line up of Killmode products.. 2900kv is gotta be a ripper for sure !!!! RCFL Brother 👊🏼💯⚙️🚀🥇
Thanks brother! ill be up there drag racing sometime soon! I"ll holla!
Congrats Leo! Seen the fla. videos be easy on them cats
I have a question for you...I'm drag racing my arrma talion 132 ft and I have a 2900 tp motor...what is a good spur gear and pinion combo...I'm running 6s
Tp 2900 is work perfect for drag racing tp 2700 is for high speed.
@@antoniopagandiaz2189 thank u
40t spur and probably a 25t pinion
great vid
What esc are you using to push that much amperage
xlx
Good shit. Glad you're back. What tires are you running?
I never left! those are bsr foams.
Wow we sick drager man 👍 👍
Epic 👌 Subbed fella 👍🏿
I just got this motor what esc would work best ?
No diss but tp motor is shit they don't worth the hype
@@racingrivals8934
Right. On you go.
Drag racing looks cool indeed. 👍
Man great vid and products👌👍👊✌️You should post a video on how to tune your car based on the esc readings. I always test by trying and never messed with the software. I would not really know what to change or to stay in certain limits..
What the function of capasitor to Rc car??
Stop Ripple voltage and hard amp draw and Current fluctuation under hard load. Restores usable power
Brilliant 👍🏽
Brah great come back I have a question can I get another rotor for my 2700kv I got form you.
yes I have them, hit me up.
those are 160 ft cars here the 1/10 are 132 ft here in jersey
Good stuff bro👍👍
drag racing is so fun.
Can this go on a arrma typhon or kraton
Not without modification. It's too long. Unless you plan on doing some very serious speed runs, there's no need. The new 4260CM in a 2610 KV is much better suited for 99.9% of what either of those rigs can be used for. The 4260CM will put down more power than you'll ever need, but it won't be so difficult to make the ESC survive.
This is a stretch but I’m just wondering.... do you like green?😂
Green for the money, Gold for the honeys!
I’m ordering Friday
You guys really need a 2000kv motor or 2200 something like that. I think you would sell a ton of them. I would definitely buy one.
No bragging! 😉
Leo I need to get in touch with you
I got to have that for my sc8
Awesome
i see you leo
Let me know when youre ready! I got you!
Kill Mode RC inbox me your number
Super nice bro !!!!!
Heeeeesss baccckkk
When the motor 2700kv is gonna be in stock again
Hi, I'm looking for a high quality motor for high speed, and I have seen that this engine is widely used for high speed. I would be very interested in one Motor, I live in Paris, you would send to France
Order your motor directly from TP Europe. No need to pay a ton of VAT and imports taxes. www.tppowereurope.com/Webwinkel-Product-173472093/TP4070CM--(Competition-Motor).html
You can get it with the KV you want. If you want something not listed, just put the KV you want in the comments when placing your order.
Any fool can drive fast in a straight line....lets see how fast you are in the corners with balance and weight transfer..
My r c car go.0-60 in 1.8sec mine is probably the fastest
What's with all the gay green
T shirt wall motor colour full gay gay
What's kind of esc and chassis to put this motor and capacitors on?