thanks for the cap packs. I must say they are very professionally done. I give you five stars on these. love them and more than I expected. I tested them on my speed car first running 8s. I checked my data logs after and got 0 ripple. you are a man of your word. I am officially putting them on my 200mph speed car project!!!!
i guess im randomly asking but does any of you know of a trick to get back into an instagram account?? I somehow forgot the login password. I would love any help you can offer me
@Rowan Dante i really appreciate your reply. I found the site thru google and im trying it out now. I see it takes quite some time so I will reply here later when my account password hopefully is recovered.
4:32 unless your holding it on so long that the wires come unsoldered from the esc you are not even close to damaging it. how you you think the power wires were attached to the esc?
QuickDrawMcDraw 227 any of them would work. I currently run the 4 pack on my Typhon on 6s and it works great. Check out the website. Www.killmoderc.com
you make soldering seem easy as heck. I noticed you mentioned to use Flux in regards to not having a powerful soldering iron. I don't use any, nor are my solders quick. what Flux do you recommend? I'm always keeping my iron on wires for more than 7-10 seconds
Dang, I've had this same bottle for so long, I don't even remember the brand, and the label is worn off. just get a liquid flux, not the paste, and just use a tiny drop on the wires. it heats up so fast.
A cheap trick for large gauge wires that works for me is to use one of those large thermal mass 100W irons designed for lead lighting. I was soldering XT-150's one after the other and it was the only way I could production line them without getting cold solder joints. Nice data on the packs. Might try the large 50V one on my 5th scale. Have you any plans to develop lower Voltage rated packs for sizing in 10th scales? I would be interested in 25V rated packs for my 4S 10th scales.
wich packs would you recomend for a 8s setup. working on a project with 2 2028 castle motors with 65t pinions. my total would be 16s with 2 separate esc's and power connections.
question kill mode rc, is there a T-connector or a Y-connector female open ended termination bullet connectors available for this specific jump/piggy back solder connection to ensure a positive locking & clean solder job? would be nice if maybe some1 can geniusly come up with a T or Y 5mm,6mm or 8mm bullet connector idea for a 8,10 or 12 amp wire gauge. just my mind wandering or simply wishful thinking.
Nice video! I've got a similar walk through in my "Lost Videos" editing backlog, but I think you actually did a better job showing good soldering technique. Would you mind if I make a card linking back to this video once I get around to posting mine version? You'd be surprised how often I get questions from guys asking about proper soldering technique or soldering tips. You seem like a good guy, so I don't mind supporting folks who have a similar mission. Keep sharing good knowledge and you will have a friend at RC Physics.
That's very cool and very rare these days. A lot of folks try to hoard all of their knowledge to get an edge over "the competition." However, I've found that teaching and answering questions forces you to gain a deeper understanding that helps you perform better. We all have our "trade secrets", but I like seeing people in the RC community helping each other move forward. :-D
rhouse21 - RC Physics Totally agree! I've actually been in the process of starting to host some events here in my area. Everything from novice up to the big dogs! Fun for all .
thanks for the cap packs. I must say they are very professionally done. I give you five stars on these. love them and more than I expected. I tested them on my speed car first running 8s. I checked my data logs after and got 0 ripple. you are a man of your word. I am officially putting them on my 200mph speed car project!!!!
Yes! thats what im talking about! please feel free to leave a customer review on the website. i'd really appretiate it.
Kill Mode RC hey bro kan I put the 3cap shorty cap pack on my sidewinder sv3
i guess im randomly asking but does any of you know of a trick to get back into an instagram account??
I somehow forgot the login password. I would love any help you can offer me
@Callum Fabian instablaster =)
@Rowan Dante i really appreciate your reply. I found the site thru google and im trying it out now.
I see it takes quite some time so I will reply here later when my account password hopefully is recovered.
Nice , I just got my team kill mode 6 pack cap pack today, thank you guys so much. Now I know how to solder in my cap pack , KILL MODE RC 4 THE WIN
tuffguy40 thanks for the support bro!
This is a good sample how to do something good! One of the rare Videos where i can see the experience of what somebody is doing! thumbs up!
Cultralight1 thank you! Check me out on the new website! Www.killmoderc.com
thanku for the lesson i have my first drag motor coming from you im so happy about that big bro keep doing what you do RcFam4Life
Wow you make this look sooo easy - what temp do you have your soldering iron set to ?
Nice video but if I may ask, what capacitor voltage and uf should one use. say for a 3S
I don't have a cap pack get but your tips on soldering are great thanks man
Hi leo. Thanks for the cap pack I received super fast from you. Also thanks for the sweet view of those short shorts, almost got a ball peak🤪🤷🏻♂️
4:32 unless your holding it on so long that the wires come unsoldered from the esc you are not even close to damaging it. how you you think the power wires were attached to the esc?
thank you for the cap pack vlog kill mode rc. well done.
Any time!
So the wires on the cap can be long just as long as they are soldered close to esc right?
Thanks for the info very nice and clean i need a cap for 6s for typhon would that be the 3 or 4 pack thanks...
QuickDrawMcDraw 227 any of them would work. I currently run the 4 pack on my Typhon on 6s and it works great. Check out the website. Www.killmoderc.com
Thanks bro just ordered some
Can I ask what Diameter solder you use as well as what flux you use? So many of them and not sure which to get.
you make soldering seem easy as heck. I noticed you mentioned to use Flux in regards to not having a powerful soldering iron. I don't use any, nor are my solders quick.
what Flux do you recommend? I'm always keeping my iron on wires for more than 7-10 seconds
Dang, I've had this same bottle for so long, I don't even remember the brand, and the label is worn off. just get a liquid flux, not the paste, and just use a tiny drop on the wires. it heats up so fast.
is it better to have 1 3000uf cap or 3 1000uf cap
Thanks for this video it help me out so much!!!
A cheap trick for large gauge wires that works for me is to use one of those large thermal mass 100W irons designed for lead lighting. I was soldering XT-150's one after the other and it was the only way I could production line them without getting cold solder joints. Nice data on the packs. Might try the large 50V one on my 5th scale. Have you any plans to develop lower Voltage rated packs for sizing in 10th scales? I would be interested in 25V rated packs for my 4S 10th scales.
Thanks for sharing, i've got the same soldiering station, the smaller pack used to make this video would be perfect for my project.
Hye sir..if i use 120a esc with 4s lipo..what the best cap pack can use..i want to try speed run
what's that pack used for? tho i don't do speed run's will this thing still help my esc out even if it run's very cold?
wich packs would you recomend for a 8s setup. working on a project with 2 2028 castle motors with 65t pinions. my total would be 16s with 2 separate esc's and power connections.
Angelo Evangelou wow! I saw the pictures. I just replied to your text.
I already gave you a review on your site. once I get them put on my project car I'll send you pics for posting
Stock blx185?
question kill mode rc, is there a T-connector or a Y-connector female open ended termination bullet connectors available for this specific jump/piggy back solder connection to ensure a positive locking & clean solder job? would be nice if maybe some1 can geniusly come up with a T or Y 5mm,6mm or 8mm bullet connector idea for a 8,10 or 12 amp wire gauge. just my mind wandering or simply wishful thinking.
not sure, I like to solder a castle 6.5mm polarized pigtail to the esc, so I can remove the cap pack easily without unsoldering them.
@@killmoderc6815
do you have pictures or a video showing this pigtail mod?
Also interested in pics
Nice video! I've got a similar walk through in my "Lost Videos" editing backlog, but I think you actually did a better job showing good soldering technique. Would you mind if I make a card linking back to this video once I get around to posting mine version? You'd be surprised how often I get questions from guys asking about proper soldering technique or soldering tips.
You seem like a good guy, so I don't mind supporting folks who have a similar mission. Keep sharing good knowledge and you will have a friend at RC Physics.
rhouse21 - RC Physics that would be great! I've been watching your videos for a while. I've learned a lot. I'm always learning, and always sharing!
That's very cool and very rare these days. A lot of folks try to hoard all of their knowledge to get an edge over "the competition." However, I've found that teaching and answering questions forces you to gain a deeper understanding that helps you perform better. We all have our "trade secrets", but I like seeing people in the RC community helping each other move forward. :-D
rhouse21 - RC Physics Totally agree! I've actually been in the process of starting to host some events here in my area. Everything from novice up to the big dogs! Fun for all .
nice. how long for the 6 packs
armenvegas the circuit board manufacturer said they should be ready next week. Then they take about 4 days to ship over. Fingers crossed.
The cap pack are soldered in parallel or in series? thx
cap soldered in parallel for increase capacity and eficiency
@@Mimi-ky3ds what if they in series. My local rc shop soldered in series and im scared to plug in my batteries now😂
Nice video👍 this helps!
Looks like you put a lot of time and effort into these how do I purchase one
Thank you for the interest! The website is www.killmoderc.com
I myself use bullet connectors like you mentioned
Hi, are you still doing the cappacks, if so, could i buy one from you, and how much, thanks.
brianthekid9 Absolutely I have several different models. You can order directly from the website. Www.killmoderc.com
Awesome!!!!
kill Mood #1
Very good!
And my tp motor melted those xt90 connectors. Now i use 6.5mm bullets
a bro what do the cap packs do to your esc
cap packs reduce ripple voltage, and esc temperature. This also extends the life of the esc by taking stress off the ESC's internal capacitors.
Kill Mode RC how kan I get one kan you sell me one
the website is killmoderc.com
Kill Mode RC kan you sell me the cap packs that is 35 for 27 or 30 bucks
dank moto life unfortunately $35 is the set price, but I can give free shipping which costs me about $7 so it about that price.
Please where can I purchase??
Roy Curry www.killmoderc.com Let me know if you have any questions.
Sell an 8s version of the motor plz
please help me make my typhons faster
Bro its ok u r human ...
Niceee
What is the purpose of this?
Order your Kill Mode Cap Pack at Killmoderc.com
waiting on the 6 pack. i checked out your site and gallery. like the way you set up the disconnectable cap pack. NICE!
Kill Mode RC now I want to see a video of that thing lol I think 2028s can run on 12 cells so why stop at 16 and not 24!?
Top gear