3D Printed Robot Chassis for the Adafruit Crickit

This chassis for the Adafruit Crickit boards prints upside down, then zip-ties together. In Tinkercad, you can customize the chassis if desired (or even send to Fusion 360).
Tinkercad design: www.tinkercad.com/things/hrOB...
Bill of possible materials:
Adafruit Crickit for the Micro:bit: www.adafruit.com/product/3928
Adafruit Crickit for the Circuit Playground Express: www.adafruit.com/product/3093
Adafruit Circuit Playground Express: www.adafruit.com/product/3333
DC gearbox motor: www.adafruit.com/product/3777
Orange and clear wheel: www.adafruit.com/product/3766
Thin white wheel: www.adafruit.com/product/3763
Rear caster ball: www.adafruit.com/product/3948
USB to barrel jack (if using a phone charger-type pack. NOTE: many of these packs shut off if they don't detect enough draw on them, so that kind won't work for this project): www.amazon.com/Barrel-Cable-5...
Small zip ties: smile.amazon.com/480pieces-Se...
Long zip ties: smile.amazon.com/50-Pounds-Te...

[@joseeband8521]

Such an elegant and simple activity . Thanks for sharing, Rob!