ฝัง
- เผยแพร่เมื่อ 16 มิ.ย. 2021
- Toyota Tacoma Roof Rack Install for 3rd Gen Tacoma! This required a bit of ingenuity and does it interfere with the satellite antenna? Have a look and let me know what you think?
You can pick the ROOF RACK at:
▼▼▼▼▼▼▼▼▼▼▼▼▼
(Commissions Earned)
As an Amazon Associate I earn from qualifying purchases
ROOF RACK #ad: Genuine Toyota (PT278-35170) Tacoma Roof Rack
amzn.to/3vuqSe7
Or at Sparksparts.com (Use Discount Code ROBMOTIVE FOR 5% OFF)
PART #PT278-35170
SILICONE USED IN THE VIDEO:
▼▼▼▼▼▼▼▼▼▼▼▼▼
(Commissions Earned)
As an Amazon Associate I earn from qualifying purchases
SILICONE #ad: Momentive Performance Materials GE284 2.8-Ounce Silicone II Premium Waterproof Kitchen and Bath Squeeze Tube, Clear
amzn.to/3j4pjAI
My Tundra Channel (RobMotiveTundra): Dedicated to the Redesigned Tundra! Here I'll post news, rumors and (ultimately) my new Tundra! Please click the link below and SUBSCRIBE (if you're interested): / @robmotivetoo
LET'S SEE YOUR TRUCK! JOIN THE ROBMOTIVE FB GROUP @ / robmotivetacoma
LINK TO MY JEEP GLADIATOR CHANNEL:
/ robmotivejt
Looking for a RobMotive channel logo decal? Email robmotive@gmail.com to purchase yours now! $6 Ea shipped in the US and $7 outside the US. Perfect for the rear window👍🏼
Check out 3b Makers on Etsy for grille light holders
DISCOUNT CODE ROBMOTIVE FOR 10% OFF BRACKETS FOR GRILLE LIGHTS: 2020-2021 Toyota Tacoma TRD Off Road and Sport OEM Grille Raptor Light Bezels. LINK: www.etsy.com/shop/3bMakers?co...
Grille purchased from sparksparts.com Discount Code RobMotive for 5% off
GRILLE LIGHTS
▼▼▼▼▼▼▼▼▼▼▼▼▼
(Commissions Earned)
As an Amazon Associate I earn from qualifying purchases
AMBER GRILLE LIGHTS #ad: LED Grille Lights Amber Yellow with Fuse for Tacoma TRD PRO Front Grille 2016 2017 2018 (4PCS, Amber Shell with Amber Light)
amzn.to/3fDbIPo
NO DRILLE HOOD DAMPERS/STRUTS #ad: Sokietech Shock Spring Strut Rod Prop Lift Support Gas Hood Damper Kit for 2016~2021 Toyota Tacoma N300 Pickup Truck
amzn.to/3t9RHTS
TOYOTA TACOMA MODS ON THE CHANNEL
▼▼▼▼▼▼▼▼▼▼▼▼▼
(Commissions Earned)
As an Amazon Associate I earn from qualifying purchases
TACOMA SPORT BAR
▼▼▼▼▼▼▼▼▼▼▼▼▼
(Commissions Earned)
As an Amazon Associate I earn from qualifying purchases
THE SPORT BAR #ad:
Black Horse Gladiator Universal Roll Bar Modular GLRB-03B - Compatible with 2015-2020 Toyota Tacoma Chevy Colorado GMC Canyon
amzn.to/3a28mRV
SEAT GAP FILLER (BLACK) #ad: Drop Stop - The Original Patented Car Seat Gap Filler (AS SEEN ON Shark Tank) - Set of 2 and Slide Free Pad and Light
amzn.to/357qgkQ
VIAIR COMPRESSOR 88P #ad: Viair 00088 88P Portable Air Compressor
amzn.to/3jFSTcR
RECOVERY BOARDS #ad: Ayleid Off-Road Recovery Traction Board Track Tire Ladder Mat for Sand Snow Mud Tire Traction Tool 4WD Blue(Set of 2)#ad
Sold by: Ayleid
amzn.to/2SeL1E3
ARMREST TRAY #ad: JKCOVER Center Console Accessory Organizer Compatible with Toyota Tacoma 2016 2017 2018 2019 2020, ABS Material Armrest Box Insert Tray
amzn.to/3iwfitC
TWEETERS (IN DASH) #ad: Genuine Subaru H631SFJ100 Tweeter Kit
amzn.to/35uR5ju
KICKER FRONT DOOR SPEAKERS #ad: 2 New Kicker 43DSC69304 D-Series 6x9 360 Watt 3-Way Car Audio Coaxial Speakers
amzn.to/2ZzoVQJ
TAIL LIGHTS (SMOKED)#ad: Raptor Style Tail Lights Fits 2016+ Toyota Tacoma
amzn.to/2Zzh5q2
BRACKETS TO ADD D-SHACKLES#ad: All Sales 88711 2009-19 Toyota Tacoma Demon Bracket
amzn.to/3hwJfbG
BED MAT#ad: Toyota Accessories PT580-35050-SB Bed Mat for Short Bed Tacoma Models
amzn.to/3ka8phR
GLOVE BOX ORGANIZER#ad: JDMCAR Glove Box Insert ABS Organizer Compatible with Toyota Tacoma (2016-2019 2020)- Upgraded Version
amzn.to/3ki2BDb
MY LIFT SETUP
▼▼▼▼▼▼▼▼▼▼▼▼▼
My Tacoma Lift On The FRONT:
(Commissions Earned)
As an Amazon Associate I earn from qualifying purchases
ReadyLift 69-5531 SST Lift Kit w/Shocks 3 in. Front/2 in. Rear Lift w/Bilstein Shocks SST Lift Kit w/Shocks #ad
amzn.to/3cnHoTK
My Tacoma Lift On The REAR
Bilstein 24186728 Rear Shock Absorber for Tacoma #ad
amzn.to/2ZX6syv
▼▼▼▼▼▼▼▼▼▼▼▼
DISCOUNT CODES FOR YOU
3b Makers on ETSY 10% Off Discount Code ►ROBMOTIVE
Sparksparts.com 5% Off Discount code ►RobMotive
Headlight Revolution FREE Shipping►ROBMOTIVE
TUFSKINZ.com 10% Off Discount code ►RobMotive10
▬▬▬▬▬▬▬▬▬▬▬▬▬
RobMotive Merch: teespring.com/stores/robmotiv...
FOLLOW ME AT:
FACEBOOK ► / robmotive
INSTAGRAM ► / robmotive
TWITTER ► / robmotive
▼▼▼▼▼▼▼▼▼▼▼▼▼
MY PO BOX:
RobMotive
P.O. Box 531390
Harlingen, TX 78553
Thanks for watching RobMotive
As an Amazon Associate I earn from qualifying purchases
#toyotatacoma #tacomamods #TACOMAROOFRACK - ยานยนต์และพาหนะ
![[4K] BABYMONSTER(베이비몬스터) “FOREVER” Band LIVE Concert “영원히” 베몬만을 사랑하게 되…💗 [it’s KPOP LIVE 잇츠라이브]](http://i.ytimg.com/vi/TQfC0xdpiw4/mqdefault.jpg)
Been watching for a while now and just drove my TRD off-road home today! Great vids awesome content excellent info 👍
Congrats and thanks👍👍
Great video.I am planning on putting mine on tomorrow so hopefully I won’t have the same issues with the two bolts!🙏🙏🙏 love the salsa music at the end 👍👍👍👍
Great video! I've always loved the way Tacoma's look with the roof rack.
Thanks. I like the look👍
Great video! I just bought my kit today…. Love the Jeep Gladiator in the background…. Thank you. Just subscribed!
Thanks Todd! Welcome to the channel👍
Awesome man! Thank you for this video!
Thanks for watching 👍
Looks great on your truck Rob! It compliments your bed rack very nicely.
It goes together pretty well. I like the look👍
I like the look
Nice Job Rob! I had the exact same issues as you did with the alignments of the wholes for the screws. One thing I had to do as well is change the screws as these will rust. They rusted while I'm in Austin before I even drive to the beach. I was able to find same type of screws that were rust resistant. Looks good man! 👍
Great idea on the screws! I didn't think of that😐
Asked the dealer how much they charge to do this (before I seen how easy it is diy) told me $1000 at the least. Unbelievable, appreciate the video! I know what summer projects I’m doing!
Wow! That's nuts! Definitely worth doing it yourself if you can👍
Love that roof rack rob !
Thanks👍
Hi Rob, finished up roof rack install in about 30 minutes, fit like a glove, also not rushing, got mine from Pennsylvania dealership came in a week, now just getting use to the new look.
Very nice. Do you like the look?
Yes, starting to like the look, also for black door handles you were the one that gave me that idea, LOL
Hole furthest back is for the crossbar in the stowed position.
Looks great! I've thought about putting one on my 2020 but haven't pulled the trigger, yet. Toyota moved the shark fin antenna forward to help eliminate the leaking 3rd taillight - then moved it back somewhere around 1 February 2020 production because of the roof rack impact.
Yup, mine is about 2.25” from the back of the cab😬
That Tacoma gets my heart racing but am considering 4 runner or even sienna. Hard decision to make in 14 months! Nice Job!!👍
Gotta get what you like/need👍
Well Done, Nice install, looks good and glad you're happy with it!
Thanks 👍
Have a look: th-cam.com/video/099Z9H7Jf-g/w-d-xo.html
Nice list👍. Nothing like the satisfaction (and dollars saved!) in doing the mods yourself👍
The lift makes things so much easier! Last time I laid on my back for an install I tore a retina (true story)! 😬
That’s a bummer! I’ve not experienced that😬
aesthetic wise it looks more aesthetic 😎
I would say thats an accurate assessment!
Great job Rob I think it looks good, kind of complements the black rollbar, all blends together pretty nice!! I actually did see a guy with that setup!! Didn’t realize there was holes under that strip!! I was thinking oh my God you gotta drill holes in your roof😂!! But I’m sure you wouldn’t of done that if that was the case 😂!!
Oh absolutely not! Never would have done it it drilled holes were needed😬
As ZZ Top say, "...Sharp dress man..." This is a very sharp dress Tacoma.
I loaded this truck with every option TRD 32’s Tire’s JBL with subwoofer behind seat. Just put the Pop lock in that morning. It’s going to be hard to find another. Dealership’s in Florida don’t have any SR5. I have full replacement on the truck but not my problem there company is paying it and more. The funny part I am a Sheriff. Have a nice day Sir
Good morning Rob, how are you this fine morning? From the research i did the racks that are purchased from Toyota (a bit more expensive I would add) are spot on in fitment. Now that you installed yours I'm installing mine, great vid by the way, your truck looks great, enjoy and thanks for the tips
Please let me know how the install goes for you👍
I have a roof rack and prefer the bars front to back and not side to side. I think it looks better that way. But it’s nice to have the flexibility to do either.
That’s what I like about this one. When not needed, the cross bars go away 👍
Very cool
Rod. That is sharp.
Thanks. It kinda ties everything together 👍
Interesting, I had my dealer install mine, can't remember why. But they complained about the install giving them trouble. I couldn't understand that until I saw your install (holes not lining up), I am surprised, usually Toyota quality is spot on.
Oh I’m sure that was their issue too😬
I have a prinsu roof rack on mine. Takes a little extra time to install but, you can definitely hold a lot more on top of your truck. I have an ikamper mini on my rack.
Nice👍
Where can I find that rack? I'm not finding anything on google
Woah, a mod video and a good one too. 👍 I’m surprised that Toyota’s roof rack didn’t fit better and account for the sun roof and shark fin. No matter. Please post a lot more pics, Rob! I’m really on the fence about this mod and would love to see how it looks on your Tacoma. Please help this indecisive subscriber put this decision to rest! 😬
Lol! There will be a few follow up videos on this one👍
Nope. No need for it for me👍
Great video Rob. I was thinking of doing the same to mine for astehics, but more so to mount a front facing lightbar to. Any thoughts on if that would be dooable?
Since the front is hollow, you could easily put screws thru to mount to. Just make sure you get the right length light bar👍
Lookin good Rob. Is this a "looks" mod or will you be using it for any storage?
Purely aesthetic at the moment! But it’s good to have the option👍
After 50 months never parked inside my 2 cents. The hardware is cheap and will rust, replace with stainless steel where you can. Use silicone on bolt holes in the roof, fill the hole completely. You will hear more wind noise and much more when deployed with cargo. You will notice the gas mileage when loaded.
Thanks for the tips Mike and thanks for posting up your first comment 👍👍
Hello Rob. Good morning. I retired as quality assurance inspector. I would never have signed off on that product. It needs more R&D before being released. The company should recall any and all of those models. The reason for your success as TH-cam celebrity is your truthful and honest!
Definitely required some ingenuity to make it work😬
Subaru has had it for a while.
Toyota has20% stake in Subaru
Hey Rob, be aware that the roof rack will rattle. This is normal when deployed. When you have a load on it the rattle will stop. I haven’t noticed the rattle when the rack is not deployed.
RubyTaco Mike
Yup….I could understand that👍
Tacos Rule! Ok, I think I know what's causing the holes to not line up on the roof racks, as I bought a set on ebay and sent them back after they didn't line up. Then I ordered another set from Extreme Terrain (Red Rock brand). Those METAL BRACKETS that mount on the FRONT of the ROOF. The BOLT HOLES on those two metal brackets SHOULD BE ELONGATED a Little Bit. This allows a little forward or backward movement (slide) of the bracket so that you can line up the rest of the roof holes. It takes a few more minutes, but it's worth it for a good fit. So DON'T Tighten the metal bracket bolts just yet. Install the bracket, and Leave said bolts a tad loose so the brackets can move (slide). Then screw the rack onto said bracket. THEN you can make sure the holes line up, as the racks can now slide a tad forward or backward. Then carefully remove the rack off the mounting bracket, so as not to move the alignment of said bracket, and Tighten the bracket bolts. NOW your holes will line up! The instructions (if any are provided) Don't Mention That! In retrospect, that first set of racks I ordered may have actually fit, as I didn't realize that until afterward.
So spread the word about them metal bracket holes! Robby from Corpus Christi
Awesome! Thanks for the tip 👍👍
I had to get different bolts to fit the ones you trimmed. They were not machined correctly.
Thanks for the video! I just installed this over the weekend on my ‘21 double cab with the intention of getting a Yakima or Thule box for skis. I’m finding that neither of those brands have a compatible solution. Are you aware of anything that will fit the OEM crossbars? Thanks!
I am not. You may have to find something that you can strap down🤔
i am waiting right now for a 2023 Tacoma TRD off road SB and need to put on a roof rack to support an Old Town Autopilot kayak (120 lbs without accessories installed) and have no clue what rack to get as the OEM says 100 lb limit, any suggestions? thanks
Have a look: th-cam.com/video/DdhfhLVPNaY/w-d-xo.html
This is the rack that came on my (pre-owned) 2016. I've had no issues with the rear bar, as long as you use the forward position. If you forget and leave the bars side-to-side, there is a bit of wind noise on the highway.
My next project is getting kayak racks up there and hoisting a 75lb kayak up there somehow. 🙄
Have you seen any weight limits for the rack? Mine was preinstalled, with no paperwork.
The weight limit is 100lbs👍
Just pay a little attention to the back and front because when I put mine I liqui water but I already solved the problem
Not sure what you’re saying?
@@RobMotive You Will see
Rob I lost one of those ruber pieces on my passenger side can't imagine why anyone would take it but they are held down pretty well so I can't see it blowing off on the highway unless it came off in the car wash but anyway it cost over a hundred dollars to replace it so make sure you hold on to them another great video thanks
Wow! That's crazy!! No way should they cos that!!😐
They are about 100 bucks a pop. One of mine was stolen too. I guess it's cheaper to replace them than buy a new one. 😂. I hate thieves.
Mine came with it. Works great, but don't leave bars across empty. (Wind noise)
Oh I imagine so😬
Nice video! I'm still considering a Prinsu. I just hope, once I do decide, my wife would be agreeable to the price... LOL!
Lol! Definitely not the cheapest option😬
Another thing to take into account is shipping. I bought mine off another site because the prinsu/cbi was going to charge me about 100 for shipping.
@@renee3238 Thanks for the tip!
That’s a pretty major mod there Rob. Kinda out of the “blue” 😂for you! I installed mine day before yesterday and looked to see if you had done it yet.
I think it adds macho points to the truck plus I plan on using mine extensively in the near future. We’ll see how that goes.
Awesome! Did your screw holes line up🤔
@@RobMotive I think they lined up pretty good but either there was too much thread lock or the holes weren’t threaded good on the truck because the screws got really hard to turn before they tightened up flush.
Like you said you have to do some finagling. Lol
The heat on the plastic may have expanded it a little bit that could be why the holes didn't line up
Possible, but I don't think so🤔
Great video. I purchased the OEM specific for my 2016 tacoma and it fit perfectly. I was concerned that the shark fin may get in the way, fortunately that did not happen. Great content, keep up the great work
Yup, I’m one of the lucky ones that got the version with the fin moved forward😬
@@RobMotive it took me a while to find the specific one for 2016, the market was saturated with aftermarket and racks for newer models.
I like it and you keep making me spend more money I'm going broke I'm going to have sell my blood for money for mods
Lol! We all must make sacrifices 😂
I'm missing the washers,can I still use the nuts like that?
I’d buy a few washers👍
I am having trouble with the final bolt for the swing arm into the passenger side rail. My rail have nothing to screw into just an open hole? anyone have same problem or can offer solution?
I didn’t have that problem.
@@RobMotive was the passenger rail supposed to come with the black stopper (black and white like the driver side rail) for the final bolt to screw into?
Should be like the drivers side.
Can we get the gasket and bolts online somewhere? I am buying one that someone took off their truck
I’d try one of the online parts suppliers🤔
Does the driver side front part sit flush with the windshield??
Mine did👍
@@RobMotive thanks for the quick response rob. Youve earned my subscription lol. please show us a video of how it sits if you ever make new vids 😆
Not sure where I am on the roof racks. Guess if I planned on carrying a bunch of stuff maybe? Don't know if I'd do it just for aesthetics? That is where we differ....you got the UTube, and need mods...me, not so much
Yup! I need to try them all👍
Rubbing on the fin, not good. Wait until you put some weight on the roof rack. Then it will rub.
Also, how close does the front pieces of the rack come to the wind shield? They may hamper a wind shield replacement as they strip off everything to access the glass.
No issues with proximity to the front windshield 👍
How does the rear of the rack secure to the truck?
Gotta watch the video👍
@@RobMotive I watched the video. So the only thing holding the back of the rack is tape?
Why do you say in one video the bolts line up. And on another the bolts do line up?
That video is almost 3 year old...I couldn't tell ya🤔
@@RobMotive thanks for the quick response. I looked again and you had the same problem. My bad
Why didn't you show all the holes that you put washers on that will be uses so there is no confusion for us watch that may be doing this?
I put them on every one👍
What are those shields over the windows? Have seen them for years. What purpose do they serve?
They enable you to crack the windows during rain or to let the hot air out while parked👍
@@RobMotive what brand are the rain shields and did you do a install video on them ?
Have a look: th-cam.com/video/0GiuwCRGOr8/w-d-xo.html
@@RobMotive thanks 😊
Second think I added to my Taco! (Marine Corp front tag was first). With all windows rolled up in NC, the heat and pressure will kill an interior. And they look great. Nice video Rob.
What s are re you going to use that roof rack for?
Hard to say? No plans at the moment.
Took long enough to get this posted... 😏 Warshers?? Is that an actual part?? 😆 Remember, if you load anything on top of the rack, the weight will push down further on that shark fin. Not sure if I would like that.
Wait? What? It’s not pronounced “Warsher”🤔🤔
My concern exactly. Will it work.. yes apparently (Thanks Rob), but load some cargo and I could see it being a problem (100lbs on a bumpy road might not be good for the shark fin). My 2020 was 11/19 production so I have the same issue.
@@dogmanky “Houston.... we could have a problem!”
Fortunately I have the sport bar too for support in the back👍
Well Rob poop hit the fan!! My 21 TRD 4x4 Sport is in taco heaven 😭😭 dump truck pulling a front loader decided to come in my lane and next was in hospital. Life sucks!!!!!!!
Oh man! Hope you’re ok!!
@@RobMotive sore have fractured bone in my right arm.hit my head on drivers, can’t believe I broke the glass with 5 percent little sore this morning . All the mods I did just did. Installed a pop n lock that morning and cleaned with 2 more coats of ceramic H1, 8 coats on it. Just mad 😡 I am not gonna be able to replace it there’s nothing out there, have full replacement value. Had it just over 2 months and all the parts that are ordered. Every option you can get. Fox said that they’ll take back the lift kit no charge. Awesome Company told them I might have to wait for the new Tacoma unless I can find one 😂😂 but dream on. Still love your channel keep up the great work let u know what happens. 👍👍👍ChristaMotive have a nice day.
It’s a shame for sure! At least you’re (mostly) ok👍
That really is some bad news. Glad that you are doing well
Don’t trim anything. Straighten the bracket with a gentle pull.
Toyota engineers must have overlooked that shark fin when designing the roof rack, then decided to modify with 2nd hole. Oem parts should function without any modifications, that's the type of thing I'd expect on a Ford not Toyota.........Come on Toyota !
Definitely a miss when it comes to design! I believe the fin is now further back🤔
@@RobMotive Rob I measure one inch from the seal edge on rear cab light to the rear of the fin on my 21. How's your 20 compare ?
Mine is about 2.25”😬
@@RobMotive 🤦♂️
Next black door handles lol
For you??
Clicked on the link to the Amazon page and says it doesn't fit my 2020 Tacoma. Just for shi** and giggles I entered 2021, 2019 and 2018 and also said it doesn't fit any of those. 🤔
Gotta be because of the possible shark fin problem 🤔
Did you say DOES NOT FIT 2018. I think this is the year Rob did. Hmm! Replies please( will this fit 2018 without hitting my ANTENNA. Thanks!
You need a camera crew.
Lol! Now that would be nice!!
Taco says wash me.
F😬or sure!!
Don't like those rails, not a good look especially with the bed rack rugged look. My first mod if I bought a truck with it would be to remove it.
That’s ok. They’re not for everyone 👍