Thank you so much for this information. I am a single lady and love to learn how to fix my mowers. Your video was fantastic because I could see clearly everything you did!!
T-Bone, this video showed up in my feed. Thanks for the part number info on the shut-off and in-line filter. Im ordering them with new fuel line and start with new on 10 and 15 year old riders. Thanks.
First time I've watched one of your videos. I have an LT3000 of that vintage. I've fixed other issues, but this is good info that I haven't seen others cover. Thanks!
ha....I spied the plugged vent early on...mainly because I've seen this a lot! Props for taking time to address this problem completely and correctly though.
Glad I found your channel. To the point and easy to watch, PLUS who wouldn't want the Mrs. to bring them a Tuna sandwich for lunch (mine does lunch too). Thank you.
Hoping you can help me here. Bought a craftsman mower off friend. Ran fine but rough. Brought home, removed the mower deck to install the snow plow attachment. When I removed the deck I thought it easier to remove the blade engagement cable from under the hood where it connects to the engagement arm. The thinking was that it seemed easier that removing the cable and spring where it attaches to the mower deck. Long story short, did full tune-up (oil, spark plug, air filter, replaced fuse - though the old one had no break, etc.) Problem: sit on seat, engage parking brake, turn key.... no click, no sound at all. Brand new battery tested with multi-meter. Haven't tried installing the mower deck back in and installing the engagement cable but going from working to nothing is disturbing. Is the clutch/blade engagement cable have some safety sensor or something that tells the engine not to start if that is not installed. Basically the blade engagement arm is free-floating. I want to reinstall the mower deck and cable to test but just haven't had time to do it yet. Thought your experience might be able to provide me some insight. Thank you!😊
Great info! Also Mrs T knows the two most important rules to enjoying a good sandwich; #1, have someone else make the sandwich and #2, add lettuce… instant gourmet!!!
I have a question for you T-bone i have a cub cadet riding mower after i cut my back yard i got to the front i disengage the blades put it in neutral put the brake on and as I'm opening the gate it will shut off and it should stay running but it does not. Any Ideas.
Awesome video. Thank You Sooo Very Much for the information in this video. i just subscribed to your channel and hit the bell thing too. i always put a fuel shut off valve on any ride on mowers that i get/own. i will be using a paper fuel filter from now on. i Realy look forward to your next video. :) :)
Hey T-bone I see you have an HC 1500 on the other table I’m looking for a coil modular they’re all discontinued its parts stores just wondering if you might have a spare from some old junker
Nice job T-Bone and it sure was sweet of Mrs T-Bone to hook you up with that tasty looking tuna sammich. 🙂👍🏼 I'll have to check out that Roosty Ruster's channel, thanks bud.
My dad's tractor just started cutting off when it gets hot, I went to check it out and now it smokes like a train and shuts off after 5 sec. Restarts and does the same again. Lots of oil leaked out of the muffler. I'm thinking I need to replace the head gaskets! Husqvarna yth22v46
The ones I use come from Rotary Corp., you have to be a dealer to buy them. Check with a local small engine shop near you, all of us use Rotary products. The Rotary part #10352.
I have a briggs. It starts everytime its 1 year old. So I was cutting grass for 2 passes then it died And it will not start back I have spark I've tested the coil and all ive check all switches for continuity everything checks out good. All lines good wires to. I adjusted valves . Even a new spark plug clean the carb ... checked head gasket. I've done everything there is humanly possible and this dang thing still won't start .. it has compression then stalls like the valves out of adjustment but I adjusted em correctly. Pulled the plug turns over fine. . The compression relief is working checked it to. I am baffled here
Thank you so much for this information. I am a single lady and love to learn how to fix my mowers. Your video was fantastic because I could see clearly everything you did!!
This video is so much more high quality than anything else out right now
Chikanic too
T-Bone, this video showed up in my feed. Thanks for the part number info on the shut-off and in-line filter. Im ordering them with new fuel line and start with new on 10 and 15 year old riders. Thanks.
Sir all of your video's are spot on, I would like to see all of your video's on dvd & easy to get.
Thank you. I think you can go to our Main Channel page and click Play All
First time I've watched one of your videos. I have an LT3000 of that vintage. I've fixed other issues, but this is good info that I haven't seen others cover. Thanks!
You are definitely the best guy I have seen for simple explanations and repairs brother. Great music interlude too ✌️👍🏻
Wow, thanks Steve!
Amen brother
Awesome sometimes we overlook the simplest things💯✔️💪🏽
Thank you
"It ain't got no gas in it", he thinks of the simplest things first. I reckon I have me some of them french fried taters.
If you ever get an older Wheelhorse C-100 garden tractor to work on I'd love to watch a complete rebuild on that brand.
ha....I spied the plugged vent early on...mainly because I've seen this a
lot! Props for taking time to address this problem completely and correctly though.
Wow awesome great job my friend. Stay in touch.
Thank you 😊 We are so busy hard to find time to watch TH-cam. Hope you are well my friend.
As always-great information in a clear and concise format. You really impress me with the experience and knowledge you have. Thank you for sharing.
Its great pleasure watching your videos T Bone,you explain things really well fix well done
Glad you like them! Thank you
Great informational and instructional video. Clear and easy to follow
Thankyou Sir.
Thank you my friend
Great diagnosis and repairs. Thanks for all the tips on these machines. Thanks for the videos.
Thank you
The only thing I would change is to use silicone grease instead of petroleum jelly (vasoline) since it will react with the rubber fuel line
Good job T-Bone I hope all is well 🔧👍
Thank you. We are doing well, hope you are also.
liked your video, I have a bolens 3.5 b.s. it runs for. a short time goes dead, perg it cracked back up. then goes dead again
Glad I found your channel. To the point and easy to watch, PLUS who wouldn't want the Mrs. to bring them a Tuna sandwich for lunch (mine does lunch too). Thank you.
Thank you my friend. Yes, Mrs T is a wonderful lady.
thanks for the great information and the video. please keep them coming. have a great day sir.
Thank you my friend
Woo-hoo thats another good un. Thanks for the shout. 🐓👍🏻
Thanks brother. Hope y'all are doing great.
Thanks T. New to channel. Cool of you to thank the wifey for lunch too. Keep the videos coming.
Nice video! What/who was the music playing during the sped up portion? Kinda rockabilly.
Thank you. Dang, can't remember who it was.
Great job 👏
Thank you for all you for us. Great video.
Thank you
Hoping you can help me here. Bought a craftsman mower off friend. Ran fine but rough. Brought home, removed the mower deck to install the snow plow attachment. When I removed the deck I thought it easier to remove the blade engagement cable from under the hood where it connects to the engagement arm. The thinking was that it seemed easier that removing the cable and spring where it attaches to the mower deck.
Long story short, did full tune-up (oil, spark plug, air filter, replaced fuse - though the old one had no break, etc.)
Problem: sit on seat, engage parking brake, turn key.... no click, no sound at all. Brand new battery tested with multi-meter.
Haven't tried installing the mower deck back in and installing the engagement cable but going from working to nothing is disturbing.
Is the clutch/blade engagement cable have some safety sensor or something that tells the engine not to start if that is not installed. Basically the blade engagement arm is free-floating.
I want to reinstall the mower deck and cable to test but just haven't had time to do it yet. Thought your experience might be able to provide me some insight.
Thank you!😊
Pull the blade engage handle towards Disengage position while trying to start.... The safety switch is not pressed possibly.
Great info! Also Mrs T knows the two most important rules to enjoying a good sandwich; #1, have someone else make the sandwich and #2, add lettuce… instant gourmet!!!
Thank you. Mrs T is way past awesome.
I have a 17.5 craftsman LT1000 and wanted to know the part number for that selinoid you are talking about
We appreciate you too. Thanks.
Very informative
I use to work with a guy that when he had a comeback, he said it was request for additional LOL
😂😄
👍 great job there Young Man 😎 glad you got it running
Thank you
@@RaleysSmallEngines you are welcome young man 😎👍
@@RaleysSmallEngines 👍
I like Tuna sandwiches too!
"It ain't got no gas in it"... Now you see their junior he thinks of the simplest things first.
Thank you sir. Just subscribed. Great info here.
Thank you
I have a question for you T-bone i have a cub cadet riding mower after i cut my back yard i got to the front i disengage the blades put it in neutral put the brake on and as I'm opening the gate it will shut off and it should stay running but it does not. Any Ideas.
Awesome video. Thank You Sooo Very Much for the information in this video. i just subscribed to your channel and hit the bell thing too. i always put a fuel shut off valve on any ride on mowers that i get/own. i will be using a paper fuel filter from now on. i Realy look forward to your next video. :) :)
Awesome, thank you!
my jd rider doing the same thing crap off the gas cap
Hey T-bone I see you have an HC 1500 on the other table I’m looking for a coil modular they’re all discontinued its parts stores just wondering if you might have a spare from some old junker
Sorry I sure don't. I just checked and none of my suppliers have it either. Maybe someone on ebay ??
as always t bone its a pleasure watching, cheers
Thank you
Great video sir !
Thank you
Nice job T-Bone and it sure was sweet of Mrs T-Bone to hook you up with that tasty looking tuna sammich. 🙂👍🏼
I'll have to check out that Roosty Ruster's channel, thanks bud.
Thanks brother
Anytime bud
My dad's tractor just started cutting off when it gets hot, I went to check it out and now it smokes like a train and shuts off after 5 sec. Restarts and does the same again. Lots of oil leaked out of the muffler. I'm thinking I need to replace the head gaskets! Husqvarna yth22v46
carburetor is leaking fuel into the crankcase
@@RaleysSmallEngines Yes sir! Same little o-ring as you showed in the video. I appreciate you brother, thanks for all you do!!
Hi Mrs.T
What you look when the blade doesn’t cut on? Every thing works but won’t cut grass
Where can I get some of those fuel filters you used in the video?
The ones I use come from Rotary Corp., you have to be a dealer to buy them. Check with a local small engine shop near you, all of us use Rotary products. The Rotary part #10352.
Thanks! I have really enjoyed your videos!
@@astairs36 thank you, glad you liked them my friend
What was the fuel line #
I have a briggs. It starts everytime its 1 year old. So I was cutting grass for 2 passes then it died And it will not start back I have spark I've tested the coil and all ive check all switches for continuity everything checks out good. All lines good wires to. I adjusted valves . Even a new spark plug clean the carb ... checked head gasket. I've done everything there is humanly possible and this dang thing still won't start .. it has compression then stalls like the valves out of adjustment but I adjusted em correctly. Pulled the plug turns over fine. . The compression relief is working checked it to. I am baffled here
👍👍👍
Like the made in the USA on the line.
Thank you, we do as much of that as possible.
but does it stay running....I literally did everything mentioned here and still have my craftsman shutting off after about 2-3 minutes of use
Maybe a carburetor kit with a solenoid + fuel filter, check air filter...clean 🫧
Floaties that's never good eeeeeuuuuuh !
Lol 🤣
Thanks for the video!
Thank you for watching my friend
on the wep
Great job from start to finish. I need your email so we can swap stickers.
Thank you. Raleytrans@gmail.com
@@RaleysSmallEngines that email failed.
@@RaleysSmallEngines it failed because of me! So sorry
@@davidcurnutt9584 I got it my friend stickers will be in tomorrow mornings mail