1800 hp SBC, what’s inside?
ฝัง
- เผยแพร่เมื่อ 8 ส.ค. 2022
- Did this SBC really make 1800hp? According to the hp calculators, it does! And it was with the parts you see here. Dart Iron Eagle Block, MGP rods, CP Bullet Pistons, solid roller camshaft, 23 deg Profiler heads, Methanol, 102mm Turbocharger. Mostly used parts! This thing has been pretty reliable and has around 200 passes. I changed the stator and it is a little tighter than I was expecting and that long spool up time killed this thrust. We will fix it and get it back out.
---------------------------------------------------------------------------------------------------------------------------------------
www.TurboJohnRacing.com
The Drag Racer's Wife sub to her channel: / @thedragracerswife
Hang out with me live every Wednesday night for Tech Talk! Ask questions and share your setups. Join here: / @turbojohnracing
Thomas Racing Service: Jeff Thomas No Prep Struts
The Brake Man: www.tbmbrakes.com
Black Sheep Industries: blacksheepindustries.ca/
Tin Soldiers Race Cars: tinsoldierracecars.com/
Check out the Jegs Pit Mat here: bit.ly/3Iq9Vc1
The baddest turbo's you can buy: www.forcedinductions.com
Cam Specialist, turbo needs: www.GetFPP.com
Mod Series Shocks: qa1.net
Torque Converters: www.hughesperformance.com - ยานยนต์และพาหนะ
![[LIVE] : ONE ลุมพินี 73 วันนี้!! คู่เอก "วรพล vs พันฤทธิ์"](http://i.ytimg.com/vi/rrOljlqse3A/mqdefault.jpg)
Go fire up that Tig machine John, don't listen to the negative comments, a racer gotta do what a racer gotta do 💪
Damn right! If you can TIG weld you can fix anything. I love it.
Not negative here, gotta do whatever is necessary, just suggested a longer lasting solution.
I love this. Someone using used parts and putting together one badass motor on a budget instead of throwing the wallet at it! This is what brings me here 👍🏼
I bet fixing up those header leaks will be worth it in terms of dome pressure requirements and spool up time!
It's the little things... Hope she stays together for the rest of the season then you can concentrate on the aluminum block !
LOL, I found this block in the storm drain at the end of the street....I Welded two cranks together out of a Studebaker to make one good one, the bearings were worn so I double stacked them with some bacon, luckily my cousin had some rocker arms, so I dint have to buy a full set, but besides the exhaust leak, She's a runner!
Pretty much
That little motor have put out alot of people at the track
True meaning of baller on a budget 😎
Damn that's so impressive how fast that car is. I'd love to see how fast TJ could go if he had a huge budget .
how fast was it?
King bearings are awesome
Yep there in my motor..👍
The motor looks great for all of the passes on it! 🤩🤩
Hard work and diligence will pay off and you got plenty of both good luck john
I am so impressed with TJ's race program. Talk about getting it done man. Can't wait to see you guys back at the track.
Hurry up John 👊💪🏁
Best of luck John!
Cant wait to see that new block turning and burnin!!
Carburetor. your going to make Bills day lol
Good luck man it's a lot of damn work
That’s a great looking motor!! I’m building a 3” stroke 350 block and a couple of turbos.
I'm with ya there's not anything wrong with using second hand parts if it works use em
Absolutely, especially on a race car that you’re willing to send to the moon on any given Saturday
Thanks for the update 👍
thats alot beating 💪
Always have great content, really enjoy the engine share, im building a modest little twin 68 mm 383, Hope it can last on a stock, block 1000hp. Don't really have the funds for a $2800 block. Great content thanks!!
Not flip flops in the shop!!🤔 You and David Frieburger....😂
Hell yea john
Somebody sign this guy
Come on Big John time tighten up that program, love the channel
Tj do the new block!!
Good luck John. You will be back soon making passes. I hope you are able to use the aluminum block now.
I used top end lube in my methanol to stop the rusty exhaust valves. You can use an engine fogging spray at the end of the race day also.
We used to spray 2stroke mix down the intake
The setup you have in the valley of the block would be awesome for Billy the kid's BBC great for ventilation and return for the oil!! Ps great vids John.
Awesome bro 😎😎
Simple but effective
This is impressive. :)
Hell everything I got in my motor is used,swap meet or friends stuff . My transmission and converter are 15 years old ,rebuilt 2 times myself motor is 6 years I do preventive maintenance.
Don't be afraid to use red loctite on the intake and exhaust bolts and would probably get new ones but I'm picky. I Sand the surfaces with a body shop long board. It makes guick work out of it and you will be surprised how flat you can get it.
why not just buy loctite blue, its the same price and made for fasteners that need to be removed occasionally, or stuff put into aluminum. honda, yamaha, and many others have used it for decades and it works fine. when using red loctite stuff going into aluminum isnt such a good idea.
Damn thing looks like a diesel with that exhaust. 😆😆
Lucky you could spool up at all with those exhaust gasket leaks.
Yeah, they were bad.
Hey tj I'm with blain5700 on this one, you need a diesel/methanol separator to get all that diesel out of your fuel tank lol 😆 😉 😄
How cute.
Probably won't find an engine shop, but you might be able to Find an engineering shop, Toolmaker and get them to turn up Sleeves to suit the aluminium block to take std chev cam bearings, or make solid cam bearings out of a suitable material,, and then you should be able to use your old cam. Another option would be modifiy the cam to take needle roller bearings. use your old cam core press on steel sleeve onto each camshaft journal, and cylindrical grind to suit 50mm bearing. And use the correct 50mm needle roller bearings.
I double my gaskets up. I use 2 gaskets on each side
hey John, have you tried the remflex aluminum header gaskets? i used them on my na street sbc and they have held up good for 2 years now. they can be reused too. mught be worth it for you to try a set.
Use gray rtv on your intake gaskets, alky doesn't affect it.
Do you need check the rods?????
😎
I can't believe more drag racers don't use short stroke engines. They worked great for many years in NASCAR engines. With about a 3.25" stroke/4"+ bore they made around 900 hp naturally aspirated at 9000rpm. They usually stayed together for 500 or more miles.
Chevy powaaa!!!🇺🇸🇺🇸🇺🇸💪💪💪💪
Tj don’t put any Boogers on that crankshaft lol 😂
Lets go aluminum!
Ain’t no one going faster on junkier junk right John let’s be honest 😂 you’re basically a high tech low budget engineer 🤷🏻♂️
lol
Have you aligned honed that block ever? If you have, how many times? Im asking because I am going to run a timing belt on mine but its been aligned honed twice and I'm not sure if the timing belt needs to be shorter or not.
I want to see it run
Don't need silicone on copper exhaust gaskets.
The headers don't cook the oil in the valve covers? Seems that would be a baked on mess inside.
I hear that my Morel lifters wont work in my Iron eagle block...I sure wish you showed the lifters..
According to the vid, you work at lightning breakneck speed (dontcha just wish we all could tear an engine down, and assemble it just that fast, and accurately), so you will back up in no time TJ, sry it had issues.
Whoohoooo, Ross finally billed my Piston deposit so they are finally forging mine now, 11 weeks from end of May seems like a lifetime as I pulled the block mid January, when the lead time quote was just 3 weeks, by end of May when everything settled out at the Machine shop covid wise, and we had a clean block and parts and pcs ready to get required pre-forging measurements, and block had been line bored, race season on special and regular orders pushed out that lead time a crapload. But, the billing of the first 50 percent on July 28th was a welcome sight on the bank statement, says the CNC Machine was busy cranking em out!
Once received and measured up, boring, honing, decking, balancing, and assembly should go a lot more quickly. Head and long block pcs are ready and waiting, as am I, to re-licence and get racing again.
Car has been dieted and highly improved, nutted and bolted bumper to bumper inside and out.
Good luck with it!
That's y racing is just for fun and cause u injoy it the pay u win if u win don't cover price of parts to fix
You tig welded it, then had it turned? Try getting it spin welded, that will last, there are some masters on YT that spin weld on a lathe cranks and other bearing surfaces. Makes it like new and bonds better all the way around, and lasts better.
Spin welding is not done with electrical voltage, but a powder sprayed on, and a high temp gas torch while spinning in a lathe, build up the steel by tiny layers where it bonds completely in a 360 degree circle to beyond the needed measurement,, then it is lathed back down and then in multi-step process, polished to a mirror finish. It is a really cool process, and there are a host of old school masters still around in your part of the country.
Hi John, Can you PLEASE tell me what company made the old HEADERS that are in this video? I would very much appreciate it! I have a very tight engine compartment situation and I believe that the Headers that you removed from the engine would work for my situation. Thanks so much, Mike
Search on eBay, SBC twin turbo headers
👍👍😎💪💯
What block is that, fresh stock or after market 🤔
Dart block
About look at his vid on spray welding a shaft, he has a home machine shop back east, he is beyond a craftsman.
Abom79 on YT
I so hate auto correct.
Yes, I follow him. That is an awesome process
Why wouldn’t you use Remflex gaskets instead of silicone?
What do you use to weld the crankshaft?
I normally tig it
what's the cubic inch of your motor what's the compression ratio and what's the Dome size on the piston and piston size? just curious that's all about building a motor like this
It's 364 ci, not sure about the rest. The block is a 400 sbc destroked
He has videos back when he built it last year telling all this!
it's 364 ci, the pistons are off the shelf pistons for a 3.75 stroke crank 6" rod. I think the compression height is 1.125. Go check out cp bullet piston catalog and you can get the full specs. My compression is lower than they advertise because my stroke is 3.34 with a 6.200 rod. Think I'm at 10.5-11ish
Wondering what intake setup you have? Thanks man!
How many passes on your rods are you comfortable making before you replace them? Or just when they decide to checkout
Yes
WOW ..!!!! I THOUGH THAT WAS A FORD ENGINE ...!!!!!!!!!!!
John on your aluminum rods at 200 passes at 8000+ rpm 1800hp you had to change the rods every 50-100 passes.?
Doing no pre we normally are around 1400-1500. And on some of the back of the track stuff probably 900-1000. I’m hoping to get about 300 passes then pull them
What brand sbc 400 iron block is that cheers
Dart. Iron Eagle
What intake manifold are you running?
RHS
Hey John, not sure if I've ask you before, but do you know a guy, Jeff Rhodes from Mayhem Motorsports? Garage in Knightdale. He's my nephew..
Yes, they are an awesome bunch of guys over there. I haven't seen him in a while, but need to swing by over there at some point to catch up.
@@TurboJohnRacing Right on man!! I haven't seen him in a while, busy lifestyle, you know how that goes I'm sure! Dude, if there's any way possible I'd like to hang with ya someday at the track. I have no car...no real friends around here...I'm going stir crazy here on the horse farm...nothing for me to do, so I live on TH-cam and weed! LOL!! Used for pain in my hip....anyway, think about it, I got some money for gas and whatever else we might need. As a matter of fact, I'm wearing my favorite shirt today!!!! This shirt is really comfortable!! love the car on the back!! ✌😎
What would a crank like that cost new? $2000-2500ish?
I don’t know, probably 3-4. It’s a nice piece. 600 bucks off eBay, lol
@@TurboJohnRacing cant beat $600 thats a steal!!!!😎😎😎
Always thought this was a SBF motor, not chev.
G r fix
Ultra copper silicone no gasket.
You dont have to be a good welder ,if ya got a good grinder. Hahahaha. Welder up. I didn't see porosity on that last weld. Good job
What cubic inch is your motor?
he said it in this video 360ci
@@jsigafoo Close 364 . Sure is durable considering.
@@jsigafoo I realized that after I watched the rest of the video.
That engine is being pushed far
Get her fixed up!!!!!!!!!!!!!!!!
SAFE TRAVELS!!
It just goes to show if you know what your doing you do not need to have a $100,000 engine to be fast and win but 20/20 on the bearings is not Ideal I stick to 10/10 most but man that is a very nice crank hate to see it get trashed they are not cheep
Still don’t believe you on the stroke. I think the crank has been stroked.😁
😂
What is all the microphone noise
It was wind from the fan, I didn’t realize it was blowing that hard.
Did I understand you to say you just have outta the box profiler heads? No porting or anything.
Yes, they are the 210cc straight from profiler. Bad little head. But I also have a small motor.
That oil is weird. You don't see normal motor oil just laying around in globs and slimed on the side of rods. I don't like it. It ain't natural.
Lmao
The oil is contaminated with methanol so it thins the oil out.. from what I understand it makes the oil not quite as effective but if the methanol and oil separates then you run the risk of the oil pickup only sucking straight methanol which is bad on bearings
Meth attracks moisture!!
@@jasonhastings5538 moisture and toothless strippers 🤣🤣🤣🤣🤣
Uhhh. Do you ever listen to your full breakdown video after you've commentated about taking your engine apart? "Well this is a leettttle (insert some word to describe damaged)" "Worn here in the middle but it'll be fiiiine" "A bit of scraping but (probably) from contamination" (because engines should be okay to have bits of metal in the oil), describe a thoroughly boned(used and damaged) bearing (well we use a lot of timing so maybe a detonation)...we'll take a look at that (and not change it because a set of NICE coated bearings would cost you all of $100).
You can't run like that anymore and win. People aren't showing up to the tracks in shitboxes anymore. They're showing up sharp. Their engines don't have 8 leaking exhast ports. They don't have bearings they're shrugging their shoulders over. I guess it's okay if you want to reduce your car to a bracket racer, but that dog's not hunting as it should, and you know it, John.
TWO HUNDRED PASSES ON ALUMINUM RODS?????????????????????????????????? Are you INSANE? Seriously. Aluminum rods...racing rods are meant for FIFTY. The serious boosted cars do 26.
No way you make that much with that turbo
go to wallace racing calculators. Car the engine was in last year, 4.67 158mph at 3000lbs. And the car has been faster than that year before last.
Who Dat ?
1800. I think not
😂 go look at older vids. 4.50’s 1/8 mile 160mph, 3100ish pounds
Aluminum rods. Shit
Badass. Sometimes less is more. You should show Billy's dad how to build a good engine. Bill whines too much. I had to unsubscribe. Lol
man the sound is horrible