What can be done if it happens that whenever you switch on a car all dash signs appears and disappears but for VDC and Airbag not seen at all? ? While they should appear and dissapears as others do?
You must check the bearings and Abs sensors, unfortunately you may need to pull the sensors out to see how much debris are on the magnet. If there is metal means your bearings are bad.
@@DadSquad_Cisco84 I went to the mechanic and he told me that there was a problem with the sensor and the magnet. It needs to be replaced because it is expired.
La nissan tiene unos sensores que detectan ABS y TCS, esos sensores son megneticos y cuando las caja de bolas se desgastan causan particulas que hacen que se pege al iman y causen fallas.
Misalignment or incorrect tire size from wear or wrong XXX/65/20 for example i had a VDC and ABS light come on... when i mis aligned my wheels... (rear). I realigned my wheels and the ABS system no longer noticed wheel ratios turning at different speeds... its most likely, incorrect tires/worn tires/ incorrect wheel alignment .. .or last a level suspension indicator(little plastic arm) is broken or popped off the frame.
My Armada just did this last week when I went over a pothole. Thanks for sharing this information!👍
Yes indeed! Wheel hub assembly has been my issue when this happened. Replaced 2 on my 2013. Definitely recommend Hub Shocker.
Did u just cleaned sensors and issue resolved or u replaced bearings
I did replace all of them because I didn't want to repeat the process before the others go bad.
Did the car kill on you??? Mines lose power
Not at all
its more likely the sensors were dirty. /not receiving the correct signals.
thanks for posting.
Thanks for sharing sir.👍
What can be done if it happens that whenever you switch on a car all dash signs appears and disappears but for VDC and Airbag not seen at all? ? While they should appear and dissapears as others do?
You can replace the ignition switch, some times that can cause electrical problems.
I have nissan armada (slip) and (vdc) is Light up When I stop the car engine, the engine does not start for an hour or more.
Can you answer fast plis
You must check the bearings and Abs sensors, unfortunately you may need to pull the sensors out to see how much debris are on the magnet. If there is metal means your bearings are bad.
@@DadSquad_Cisco84 I went to the mechanic and he told me that there was a problem with the sensor and the magnet. It needs to be replaced because it is expired.
I guess I answered your question. Make sure you do the other part to check the bearings
@@DadSquad_Cisco84 Thank you for your quick response and I will check everything you mentioned and thank you
Thank you🙌
Damn I’m dealing with this right now
Thank you so much
Nice! Thank you!
quiero la explicasion de falla delvdc activa y desactiva
La nissan tiene unos sensores que detectan ABS y TCS, esos sensores son megneticos y cuando las caja de bolas se desgastan causan particulas que hacen que se pege al iman y causen fallas.
Misalignment or incorrect tire size from wear or wrong XXX/65/20 for example
i had a VDC and ABS light come on... when i mis aligned my wheels... (rear).
I realigned my wheels and the ABS system no longer noticed wheel ratios turning at different speeds...
its most likely, incorrect tires/worn tires/ incorrect wheel alignment .. .or last a level suspension indicator(little plastic arm) is broken or popped off the frame.
Speed sensor
It was probably one of your abs sensors and your front wheel bearing hubs come with new ones.
Chad Kouse exactly, i change all 4 and problem was gone.
I had same problem before now do to an alignment i have to replace tbe rear one passenger side
Same here, wheel bearing and sensor.
My came on after i put two own