They're Torx T15 screws At 1:46 you put the pin in from outside on the right while the spring and clip are already in place; this is a good way to break the console lid. It's way better to assemble the clip with the pin and spring before putting it in; just slide the pin left/right as necessary to to get both ends of the clip in.
I'm happy to see this as I have the same exact issue, but dude what in the holy hell are you doing with the music!!! You might as well be speaking in Klingon for all the good your narration does.
Surprisingly installing the latch was the easy part, I really struggled getting that underside cover back on though! I wasn't getting the cylindrical parts registered in their holes properly. Thanks for posting this!
Thank you!!! I got my armrest finally fixed!!! I have a Honda 2011 and I had to place the bar first and then load the clip and spring together because the bar couldn’t load from the right side like your demonstrating its as if I had to bend the bar to get it inside so I placed the bar on the right side like you said and then loaded the spring with the clip and waaa la! It loaded! I’m so excited thank you for your awesome teaching skills!
Thanks for putting this up. Cant believe people complain about you having made this video free of charge for them. I guess free isnt good enough for some.
Arrgggh! I kept having problems with the spring, and this video, the music, the shaky camera, bad editing,...was driving me bonkers. Found another one here: th-cam.com/video/6bpIY5TK8d0/w-d-xo.html I highly recommend it if you are frustrated like me.
Hey great vid! I have a similar problem. In my case the latch is not broken but the part on the arm rest that holds the latc (the one that you slide the spring in to) I cannot find a replacement for it anywhere on the Internet. Any advice?
@@ashleyc3907 I completely dismantled the arm rest. Drilled a little hole in the plastic and ran a wire trough it to hold the spring for the latch. I fixed that but I managed to break the sliding mechanism of the armrest, so be careful.
Is the music really necessary? Its louder than your voice. Also the camera does not point in the correct direction while you're explaining the installation points. 3/10
I did this and the pin that the spring wraps around fell into the “black hole” located underneath my chair and I can’t find it. Would you happen to know where I can get a replacement?
Good info. I clicked like. Take the music off, you would get more likes. Can barely hear your voice. People would rather hear the info. than than music. I have this exact problem with my car. take music off. Keep up the good work.
Thank you, brother! It's a pretty simple repair, but not everyone just takes entire Vehicles apart like myself and many other just to figure out how they work. LOL. Do you think it's about 150,000 or so that these start to fail? Anyway, appreciate it! Out of curiosity, do you know have a good source boresight I should say, 06 through 11 passenger door needed. LOL
Jesse Reyes u can also get from Honda local delaer. I bought it from them it cost me around 10 dollars and if biy complete console it will be around 160 dollars
Please remove the music it's so distracting I am a teacher and I can't even hear you to know what to do with all the background noise and I need to fix the same problem you are demonstrating!
Nice ! ill do exactly what the music says
ahahahahahaha
So funny
Haha..
Lol
Lol ikr
the music is so loud no one can hear wtf your saying
LOL
so damn true.
What else can you expect from the poster who has "Wedding Films" in the name??
Great music, thats what I came here for
Can you post without the music?
Music is totally unnecessary.
the music is louder than your voice!!! what a shame!
Thank you! Despite the loud music in the background, I was still able to fix my latch! Really appreciate it!
Guys, the music sucks so we can't hear what he is saying. Solution, mute the video and turn on the subtitles. It actually helps.
Have same problem with our Civic. Now I know how to fix this instead of paying Honda Dealer bunch of money. You saved us a lot of money. Thank you!!
Great video… play music only when your not talking. Or no music at all for this DIY. Thanks again!
They're Torx T15 screws
At 1:46 you put the pin in from outside on the right while the spring and clip are already in place; this is a good way to break the console lid. It's way better to assemble the clip with the pin and spring before putting it in; just slide the pin left/right as necessary to to get both ends of the clip in.
Good note, thank you for the tip
exact video i needed. seriously i wish there was no music and i wish the camera work was better. but hey, it beats nothing
1475inferno hi did you fix it my also damaged pls help me
I'm happy to see this as I have the same exact issue, but dude what in the holy hell are you doing with the music!!! You might as well be speaking in Klingon for all the good your narration does.
Thanks I pissed off at the thought of replacing the whole thing. This will save a ton of time and money.
you need to remove the music bro we can't hear shit
Surprisingly installing the latch was the easy part, I really struggled getting that underside cover back on though! I wasn't getting the cylindrical parts registered in their holes properly. Thanks for posting this!
Can't hear you , music is kind of annoying lol however good instructions! Thanks! 😉
A strong suggestion, I could not hear what you were saying because of your loud background music. I would lose the music….
My car broke the same the armrest latch... , great video. it so simple to fix we just need to watch the video that good enough, thanks man
Thank you! I almost convinced myself that it couldn't be fixed, but after watching this, I had instant success! Thank you!
The music sucks would have been better with out music
Thank you!!! I got my armrest finally fixed!!! I have a Honda 2011 and I had to place the bar first and then load the clip and spring together because the bar couldn’t load from the right side like your demonstrating its as if I had to bend the bar to get it inside so I placed the bar on the right side like you said and then loaded the spring with the clip and waaa la! It loaded! I’m so excited thank you for your awesome teaching skills!
Thanks for putting this up. Cant believe people complain about you having made this video free of charge for them. I guess free isnt good enough for some.
The video is great. Exactly what I needed to see. Just need to turn down music a bit.
Arrgggh! I kept having problems with the spring, and this video, the music, the shaky camera, bad editing,...was driving me bonkers. Found another one here: th-cam.com/video/6bpIY5TK8d0/w-d-xo.html I highly recommend it if you are frustrated like me.
exactly what i was looking for. congratulations youtube search.
now if only i could see or hear anything pertinent...
Thanks man. I bought this new clip he was not able to understand how to fix new one. Then i showed him ur video lol
Thanks for the video! It was very helpful.
Yes, the music was loud, but I was still able to get the info. Thanks again.
My heroe!! thanks a lot my friend...i broke my head all week Regards!!! note: Music is louder.
Agreed, I can't hear him speaking over the incredibly loud music.
The best vídeo, thanks!! São Paulo- Brazil
Thank you very much for taking the time to make this video. It was a piece of cake after watching your video.
Music is too loud, can't hear you.
Can't here you over the music, guess I'm supposed to play a classic rock beat?
Music annoying can't hear you.
Local dealership quoted me over $500. They said they had to replace the whole center console. $16 from ebay and 15 minutes time is all it took.
I just got quoted $400 to replace the whole thing...
nice video but music is loud I couldnt hear you
what kind of screw you use and what website did you buy the clip off? thanks!
Do you have a video showing how to fix the opposite end that flips the armrest up?
music too loud but super informative! thanks!! :-)
Love the (too jiggly) visuals and what I could hear of the instructions, HATE the noisy music.
Great video remove the music so we can hear what you are describing
I think he should’ve warned that the music was gonna be so loud, i just woke up half of my neighborhood lol
Hey great vid! I have a similar problem. In my case the latch is not broken but the part on the arm rest that holds the latc (the one that you slide the spring in to) I cannot find a replacement for it anywhere on the Internet. Any advice?
Did u ever find the solution having the same problem rn
@@ashleyc3907 I completely dismantled the arm rest. Drilled a little hole in the plastic and ran a wire trough it to hold the spring for the latch. I fixed that but I managed to break the sliding mechanism of the armrest, so be careful.
I can’t hear yr voice but yr video can save lots of my money thanks.
Thanks! Worked great!
Cool,this is what I'm looking for urgently,thank you very much!!!
good tutorial though. your method is easier than the shop manual's method. nice one!
Thanks for the help, mate. You should've done an Amazon Affiliate link to the product so you could get commission.
Hey, the screwdriver that's needed is called a Torx T15... 👍
the spring is magical.
Thanks to the music, I got the spring to pop out of its spot and now my new problem is to get the bar out again.
Man the audio was good as watching the movie tenet in a movie theater
thank you very much you made my day god bless you
I fucking love you bro for making this video. Thank God I was going crazy
Yo this is just what I needed but the only downside is that you never gave us the link to download this AMAZING song.
Is the music really necessary? Its louder than your voice.
Also the camera does not point in the correct direction while you're explaining the installation points. 3/10
Thanks man, it worked!
Hi friend. Sorry about my english. For the civic 2014 is the same???
I did this and the pin that the spring wraps around fell into the “black hole” located underneath my chair and I can’t find it. Would you happen to know where I can get a replacement?
Bro..... ahhhhhh!!!! remove the music ;-)
thanks for your help
But does the Honda dealership sell the part that holds the spring? That’s the part that broke
Great video advice but you should do it with out the music (to loud) I can hear you.
Everybody shutup... this song is my JAM!
My metal bar won’t curve idk if my arm rest cushion comes lower but it needs a serious bend to get through
Good info. I clicked like. Take the music off, you would get more likes. Can barely hear your voice. People would rather hear the info. than than music. I have this exact problem with my car. take music off. Keep up the good work.
i have the same exact issue thanks a ton .. i was to replace the arm rest had i not seen this video,, and yes plz turn down that music .
Mine is also damaged where to get this part and how much will it cost
How to repair on which the spring is resting
i couldnt open the clip, cuz i started dancing
what screwdriver do you use?
thank you very much
Was the music necessary??
What size Torx are those?
music level is too loud. can barely hear your voice.
Thank you, brother! It's a pretty simple repair, but not everyone just takes entire Vehicles apart like myself and many other just to figure out how they work. LOL. Do you think it's about 150,000 or so that these start to fail? Anyway, appreciate it! Out of curiosity, do you know have a good source boresight I should say, 06 through 11 passenger door needed. LOL
Would you like some tutorial with your music
i might suggest a subtitle would be more than fantastic
I couldn't even watch because the music was too loud :(
Galaxy Brain Idea: Reupload the video without the music.
Muito obrigado, parabéns !!!
감사합니다. thanks haha
tell me how to remove center console of honda civic 2010 ?
what is the part number from honda?
where did you purchase the replacement clip from?
I just bought one on ebay. It was $16 dollars shipped though...
Jesse Reyes u can also get from Honda local delaer. I bought it from them it cost me around 10 dollars and if biy complete console it will be around 160 dollars
Pretty much lost me from 1:45-2:00....the most important steps too LOL
Ugh, is there any way you can upload this again but without the music? Can't hear a thing you're saying.
What’s the part number for this?
Please remove the music it's so distracting I am a teacher and I can't even hear you to know what to do with all the background noise and I need to fix the same problem you are demonstrating!
LOL, helpful vid, but completely screwed up with the music
It would be much better if there were no music. You cannot hear a word you are saying when the music starts. FYI
I could follow your directions better, if the music was lower or off.
how to remove this lock holder
helpful but i didn’t hear you talk. you’re a nice drummer tho
let's see music too loud and his user name is wedding films studios?? I guess I need to start calling studios for Honda repair tips...
What's the name of the screws
I kinda get what you’re saying, but the music is way over powering and I can’t really hear you.
Why do you have that insane music on making it virtually impossible to hear you?
Good info whats with the loud music made the video useless
Which screw driver do u use can someone link it
Rohin Bansal it's a torx screw driver
Way to add music louder than the actual video