Thanks Raj! This really helped. On the final steps I found it easier to place the rubber surround around the small pipe before putting the whole lot into the housing.
Thank you so much for this helpful advice! I had been storing my carafe in the fridge at night and suddenly had the problem of having the unit fail to produce milk foam. Your tip on cleaning all the little bits paid off. I think see a tiny bottle brush to open up the holes on the conveyor tubes. Worked perfectly. BTW Gaggia should provide such a brush on these units.
Very good video, and thank you for providing it for us. We have the Magenta Prestige and it is slightly different -- a little less complicated. There is no visible magnet, for example, and no flap that has to be moved while re-assembling. But the essential principles are the same. You make an excellent point about removing the cappuccinatore and rinsing it out with tap water prior to placing the carafe in the fridge. I think this is VERY important since, even after using the Quick Clean cycle every time I make a milk drink, I still find milk residue inside the cappuccinatore parts if I disassemble them. That one step may well prevent any major malfunctioning! Wonderful machine, by the way. You should be very proud.
Thank you so much for this . A blind state of panic was easily overcome due to this video. This step by step guide reduced my blood pressure and I was rewarded with a lovely cup of cappuccino after following these simple steps. The relief is immeasurable
Thank You for this video. i was having trouble with the milk system. I didn’t realise how easy it all came apart. My wife and I are now enjoying a Latte ;)
Great video. Do you really have to open the flap to insert the one part??? I have watched other videos and they never open the flap when reassembling. Open the flap is not an easy thing to do-very awkward.
@@twicaksono CAD (technical drawing) enough. I think. They easily exchange into STL. But first gaggia must share it. İf it not Italian gaggia we change our Cappuccino taste into Americano. Yeah this is threat
Thanks Raj! This really helped. On the final steps I found it easier to place the rubber surround around the small pipe before putting the whole lot into the housing.
This was massively helpful and worked for me
Thank you so much for this helpful advice! I had been storing my carafe in the fridge at night and suddenly had the problem of having the unit fail to produce milk foam. Your tip on cleaning all the little bits paid off. I think see a tiny bottle brush to open up the holes on the conveyor tubes. Worked perfectly. BTW Gaggia should provide such a brush on these units.
Very good video, and thank you for providing it for us. We have the Magenta Prestige and it is slightly different -- a little less complicated. There is no visible magnet, for example, and no flap that has to be moved while re-assembling. But the essential principles are the same.
You make an excellent point about removing the cappuccinatore and rinsing it out with tap water prior to placing the carafe in the fridge. I think this is VERY important since, even after using the Quick Clean cycle every time I make a milk drink, I still find milk residue inside the cappuccinatore parts if I disassemble them. That one step may well prevent any major malfunctioning!
Wonderful machine, by the way. You should be very proud.
Thank You. Much appreciated.
Thank you for producing this video, has been very useful in explaining why my machine is not working properly,
Thank you so much for this . A blind state of panic was easily overcome due to this video. This step by step guide reduced my blood pressure and I was rewarded with a lovely cup of cappuccino after following these simple steps. The relief is immeasurable
This was so helpful, thank you!
Thank You for this video. i was having trouble with the milk system. I didn’t realise how easy it all came apart. My wife and I are now enjoying a Latte ;)
Great video. Do you really have to open the flap to insert the one part??? I have watched other videos and they never open the flap when reassembling. Open the flap is not an easy thing to do-very awkward.
Thank you for the video. I was able to get it working again.
thanks for the tips!
Wonderful instructions thank you
This is great, thankyou so much
lubrigation of orange rubber part worked
01:55 broke down. I need spare part of it unfortunately :(
I had the same problem. Did you get the spare part? Last time the vendor told me to buy the new milk carafe.
@@twicaksono We need STL format file to have make it to 3D printer users/office s. (STL format is not must we need a CAD).
@@twicaksono CAD (technical drawing) enough. I think. They easily exchange into STL. But first gaggia must share it. İf it not Italian gaggia we change our Cappuccino taste into Americano. Yeah this is threat
can't see a thing with his fingers in the way