Need ng additional holes sa side panel para mas malapad ang ventilation ng dual fan video card. In that case pwede mo sya ipa-mod para mag improve yung cooling.
Genial!! I like that build soo much bro. Pero given na RYZEN build yan wag ka na magtaka kung talagang may heat yan lalo nat compact masyado. pero kung Intel build yan di o magiging problem ang heat.. kudos bro
Hi. Thanks for the vid. I keep rewatching this vid because I really want to do an ITX build like this. I have a question - does the FlexGuru Pro 500 make a lot of noise in this case? I've read some reviews that it's the loudest component in their rig. Thank you.
be careful when choosing the motherboard for this case because some motherboards have a large extended protruding heatsink by the I/O ports and it might block the power supply from going into the case. One example is the Asus ROG B660i itx motherboard.
If APU and ok with the ff: 1. Proprietary components and its risk (not really future proof) 2. No plans for dGPU (or ok with a janky "egpu" solution) 3. Not really "wow" for games Then I'd go for Asrock Deskmini X300. Light enough. For 25k budget: 10k deskmini x300: case / mobo / power 7k 5600g proc 4k 32gb ddr4 sodimm RAM The rest for ssd (m.2 nvme or sata)
Ah sorry. "Interchangeable" ang 90 and 92mm. 92mm yung precise dimension talaga ng fans pero yung iba ang naming ay "90" lang, e.g. Thermalright tl-9015, by name dapat 90mm (length and width) x 15mm (thick), pero reality 92mm talaga yung length and width. For noctua and scythe, ang meron lang din ay 92mm fans and no offering of 90mm fans. As for cases, sila ay notorius sa "90mm" compatibility pero don't worry, kasya 92mm precise dimension. I also had similar concerns back then, sabi ko na lang bahala na. So far, 92mm fan works since di ka talaga makakahanap ng precise 90mm fan from top brands. Also, while concern ang 1mm sa gpu / cpu cooler compat, sa screw hindi gaano, can't explain why pero hindi ganong kasensitive. I hope I made sense.
Boss compared to sg K39 ano po smaller, tsaka sana mag share karin ng video sa FSP Flex guru 500w. And fan mod if gagawin mo. Building my first sff with sgk39, 5600g, Gigabyte a520i, flexguru pro 500
As the a520i ac is no longer in my possession, I don't have definite answers. But looking at it, it should be fine, just compy to their ram height requirement. To your premise though, motherboard ram section won't be a concern, but rather the VRM HS and the actual RAM height. Best is to contact id cooling directly though for authorative answer. Thanks
Kung AIO, mukhang malabo sir. Bale kelangan mailusot yung rad or pump sa ibabaw kaso di nabubuksan yun... Baka di kasya. Nasa 20mm lang opening kasi nun. Kung custom loop sir mas posible. Pero yung pump and reservoir di ko lang maisip saan ilalagay. Sa labas siguro. Regardless sir, 120mm rad lang kasya. Consider na 44mm gpu thickness lang ang supported. 27mm sa rad + 15mm sa fan, sagaran hehe.
@@manongunboxing Salamat sa pagsagot sir. Yun rin nga concern ko kung pano papalosot sa kabilang compartment yung rad+fan. Sguro overkill din naman sya for 5700g hehe
Yes sir, overkill aio for 5700g. 95% of the time, pwede na stock cooler. If you want best low profile (47mm), alpemfohn blackridge -- mahal lang. Good compat + good quiet perf: noctua nh-l9a-am4 Cheap and good pero sakit sa ulo (installation and noise): thermalright axp90-x47
@@manongunboxing noctua l9a gamit ko ngayon sa 3400g ko currently. Upgrade ako soon to 5700g. Gusto ko kasi mgtry liquid cool naman, cool kasi hehe. Baka may marerecomend ka sir na smallest case na pwde aio sir, Salamat po
Yung exact build, nasa 34K (nilagay ko po yung breakdown sa description). If for minecraft na walang ray tracing and no shaders, pwede kayo makatipid with 5600G though -- better CPU as well. Gumamit lang ako ng 4350g kasi yun ang available na pwede ko ibigay sa kapatid ko. 5600G option: Case: ZZAW A1P - PHP 3.6K Processor: Ryzen 3 5600g- PHP 7K Motherboard: Gigabyte UD A520I AC - PHP 6K RAM: Kingston 2x8GB 3200Mhz CL16 - PHP 2.2K CPU Cooler: Thermalright AXP90-X47 - PHP 2K PSU: FSP FlexGuru Pro 500W - PHP 5K Total: 25.8K
For every case that I try on, lagi ko pong sinusubukan yung best gpu na meron ako na kakasya para malaman ko yung cooling perf ng gpu sa case. Without me testing it, hindi ko makikita yung problema sa case (in this case, hirap sya sa dual fan gpus and ok sa single fan gpus). Yung processor choice ko is that ibibigay ko kasi sa kapatid ko yung case, mobo, and cpu. Kaya yun ang ginamit ko po at the time, less work for me hehe. Recently lang ako nag-standardize to 5800x w/ dgpu build or 5600g for apu build. Lastly, di rin naman po kasi bawal and sensible sya na upgrade path. Say 5600g kayo now w/o dgpu, pwede yan salpakan ng rtx 3060 for better graphics performance.
@@scyyon BT and WiFI yes. With 2 HDMI ports yes, but you'd be only able to utilize it with an AMD G processor. If not, you need to buy separate discrete GPU.
I live in the USA you cannot get this product so this video is misleader don’t get this product. If you’re from the USA his video is mislead. I’ll give his comment a bad review. I will give a thumbs down.
Need ng additional holes sa side panel para mas malapad ang ventilation ng dual fan video card. In that case pwede mo sya ipa-mod para mag improve yung cooling.
Thanks for the info but I only test in vanilla.
I watched your other videos too. Thank you for your effort. I realy liked your content. Keep going. GL :)
Genial!! I like that build soo much bro. Pero given na RYZEN build yan wag ka na magtaka kung talagang may heat yan lalo nat compact masyado. pero kung Intel build yan di o magiging problem ang heat.. kudos bro
@@roysalazar2132 baligtad ka pre hindi na FX series era 😂😂😂
@@RandomDPAP if that model has no temp issue. than baka may sira nga ang system ko, pareho kami ng system eh🤣
@@roysalazar2132If a 65w TDP CPU is having cooling issues that is a "you" problem.
Saw a similar build in fb but owner cut open the side to fit a trifan gpu I might do the same
Hi. Thanks for the vid. I keep rewatching this vid because I really want to do an ITX build like this.
I have a question - does the FlexGuru Pro 500 make a lot of noise in this case? I've read some reviews that it's the loudest component in their rig.
Thank you.
Yeah, me too, I am always getting the same comments with flexguru but tbh, mine was really quiet.
The noisy one for me is the cooler's fan.
Agree sir, NVME talaga the best for ITX... Hirap mag build pag madami wires
that voice though 🤤🤤🤤
Hey man, awesome channel! Hope you can try and build with the K39 v3 mini itx pc case, that would be another great content on your channel. Cheers!
be careful when choosing the motherboard for this case because some motherboards have a large extended protruding heatsink by the I/O ports and it might block the power supply from going into the case. One example is the Asus ROG B660i itx motherboard.
Sir pasensya sa abala. Ano pong magandang case sa 5 5600G na APU build na pang travel na din. Below 25k build. Thank you!
If APU and ok with the ff:
1. Proprietary components and its risk (not really future proof)
2. No plans for dGPU (or ok with a janky "egpu" solution)
3. Not really "wow" for games
Then I'd go for Asrock Deskmini X300. Light enough.
For 25k budget:
10k deskmini x300: case / mobo / power
7k 5600g proc
4k 32gb ddr4 sodimm RAM
The rest for ssd (m.2 nvme or sata)
good job👍
sir naguluhan lang ako base sa spec ng case kaya 90mm fan pero nilagay mo 92mm, di ba nag ka problem sa pag screw ng fan
Ah sorry. "Interchangeable" ang 90 and 92mm. 92mm yung precise dimension talaga ng fans pero yung iba ang naming ay "90" lang, e.g. Thermalright tl-9015, by name dapat 90mm (length and width) x 15mm (thick), pero reality 92mm talaga yung length and width.
For noctua and scythe, ang meron lang din ay 92mm fans and no offering of 90mm fans.
As for cases, sila ay notorius sa "90mm" compatibility pero don't worry, kasya 92mm precise dimension.
I also had similar concerns back then, sabi ko na lang bahala na. So far, 92mm fan works since di ka talaga makakahanap ng precise 90mm fan from top brands. Also, while concern ang 1mm sa gpu / cpu cooler compat, sa screw hindi gaano, can't explain why pero hindi ganong kasensitive.
I hope I made sense.
@@manongunboxing boss thank you sa info 👌
Boss compared to sg K39 ano po smaller, tsaka sana mag share karin ng video sa FSP Flex guru 500w. And fan mod if gagawin mo.
Building my first sff with sgk39, 5600g, Gigabyte a520i, flexguru pro 500
Smaller po sg k39 (4.4L vs 5.2L).
Malabo sir fan mod. Basta po psu, ayaw ko po galawin.
@@manongunboxing understandable sir salamat, kumusta naman po noise ng flex guru under gaming load sir?
Negligible sir. Kelangan ko ilapit ng sobra tenga ko sa psu para marinig. Ang maingay sa builds ko usually ay yung fan ng cpu or gpu.
@@manongunboxing salamat sa info, big help talaga sa build ko
@@manongunboxing salamat sa info, big help talaga sa build ko
you think I can fit a 198mm GPU on this Manong?
Hello, likely will not fit. The tolerance here is very tight.
Will this case support asus phoenix RTX 3060 Single fan? thinking about doing a build
I don't think so. Asus 3060 phoenix is 2.5 slots thick. The case can only support up to 2 slots.
@@manongunboxing oh alright because the rtx 3060 supports k39 v3 so assumed it would support this case
Yeah some cases will say 2 slots only and exactly that. Some can be pushed to fit more. I wouldn't let someone risk it though 🙂
Will your ID Cooling IS-55 fit the A520i AC without hitting the RAM area?
As the a520i ac is no longer in my possession, I don't have definite answers. But looking at it, it should be fine, just compy to their ram height requirement. To your premise though, motherboard ram section won't be a concern, but rather the VRM HS and the actual RAM height.
Best is to contact id cooling directly though for authorative answer.
Thanks
@@manongunboxing BTW, thanks as well for giving cool ideas for itx builds.
Kasya kaya yung sapphire pulse rx 7600 sa zzaw a1p kasi i plan to am5 itx build
Won't fit po. You may check gpu length ng sapphire rx 7600 vs gpu length compatibility nitong case.
Hello po. Pwede po kaya liquid cooled APU on this case? Radiator dun sa kung saan dapat yung GPU?
Kung AIO, mukhang malabo sir. Bale kelangan mailusot yung rad or pump sa ibabaw kaso di nabubuksan yun... Baka di kasya. Nasa 20mm lang opening kasi nun.
Kung custom loop sir mas posible. Pero yung pump and reservoir di ko lang maisip saan ilalagay. Sa labas siguro.
Regardless sir, 120mm rad lang kasya. Consider na 44mm gpu thickness lang ang supported. 27mm sa rad + 15mm sa fan, sagaran hehe.
@@manongunboxing Salamat sa pagsagot sir. Yun rin nga concern ko kung pano papalosot sa kabilang compartment yung rad+fan. Sguro overkill din naman sya for 5700g hehe
Yes sir, overkill aio for 5700g. 95% of the time, pwede na stock cooler.
If you want best low profile (47mm), alpemfohn blackridge -- mahal lang.
Good compat + good quiet perf: noctua nh-l9a-am4
Cheap and good pero sakit sa ulo (installation and noise): thermalright axp90-x47
@@manongunboxing noctua l9a gamit ko ngayon sa 3400g ko currently. Upgrade ako soon to 5700g. Gusto ko kasi mgtry liquid cool naman, cool kasi hehe. Baka may marerecomend ka sir na smallest case na pwde aio sir, Salamat po
So far sir, wala pa. Pero hanap po ako ng sub 7L. So far, nasa 10L na kasi mga nakikita ko. If nasa ganon na yung volume, e di lian li a4 h2o na lang.
magkano po inaabot usually ng ganyang build? balak ko mag build para sa anak ko pang minecraft lng at microsoft office.
Yung exact build, nasa 34K (nilagay ko po yung breakdown sa description).
If for minecraft na walang ray tracing and no shaders, pwede kayo makatipid with 5600G though -- better CPU as well. Gumamit lang ako ng 4350g kasi yun ang available na pwede ko ibigay sa kapatid ko.
5600G option:
Case: ZZAW A1P - PHP 3.6K
Processor: Ryzen 3 5600g- PHP 7K
Motherboard: Gigabyte UD A520I AC - PHP 6K
RAM: Kingston 2x8GB 3200Mhz CL16 - PHP 2.2K
CPU Cooler: Thermalright AXP90-X47 - PHP 2K
PSU: FSP FlexGuru Pro 500W - PHP 5K
Total: 25.8K
@@manongunboxing salamat po ng marami
Boss sukat kaya ang aisurix rx580 jan?
Hindi po.
Boss tanong lang po bakit po nag gpu pa kayo G nman po yung proce nyo? Plano ko kasi mag build dn same nyan pero wala na graphics card ryzen 5 5600g
For every case that I try on, lagi ko pong sinusubukan yung best gpu na meron ako na kakasya para malaman ko yung cooling perf ng gpu sa case. Without me testing it, hindi ko makikita yung problema sa case (in this case, hirap sya sa dual fan gpus and ok sa single fan gpus).
Yung processor choice ko is that ibibigay ko kasi sa kapatid ko yung case, mobo, and cpu. Kaya yun ang ginamit ko po at the time, less work for me hehe. Recently lang ako nag-standardize to 5800x w/ dgpu build or 5600g for apu build.
Lastly, di rin naman po kasi bawal and sensible sya na upgrade path. Say 5600g kayo now w/o dgpu, pwede yan salpakan ng rtx 3060 for better graphics performance.
sir ano weight nito with all the compotents?
Sorry sir no exact answer. Nabaklas ko na kasi dati pa. Ang tanda ko e mabigat. Around 5kg
Kasya ba yung A520I MoBo sa D21 Pro Case Sir?
Yes. Standard po ang "itx" motherboadx form factor and d21 pro supports only itx form factor.
@@manongunboxing Yang A520I MoBo has the Wifi and BT antennas, w/ 2 hdmi ports diba? Baka gamitin ko kasi for dual screen WFH Sir.
@@scyyon BT and WiFI yes. With 2 HDMI ports yes, but you'd be only able to utilize it with an AMD G processor. If not, you need to buy separate discrete GPU.
problem talaga yung axp90 screw buti nlng nagawan ng paraan ng utol ko pinutol yung excess gamit grinder
Flexguru 500w pwede sa amd 5 5600x at red devil 6600xt?
Yes. Pero best po is to check your specs sa calculator din:
www.fsplifestyle.com/landing/calculator.html
383 watts pero recommended 550w
Kaya po yan, 76% utilization on full load
Kahit 18 hours daily use? Kaya bah ng flexguru 500w po?
18 hrs daily on full load?
Pwede po ba yung sfx psu?
Hindi po. Hindi po kakasya
lods ginaya k build m kaso wla power haha
Update, binenta ko na lahat ng parts ng itx ko haha nakakawalang gana
sending hate from my house
I live in the USA you cannot get this product so this video is misleader don’t get this product. If you’re from the USA his video is mislead. I’ll give his comment a bad review. I will give a thumbs down.
K
Wha? I just got it from Newegg for $60. It has been on both Newegg and Amazon for months!!!