I literally just stopped everything. I was doing took my gloves off just to give you a thumbs up. I was absolutely stuck on trying to figure this thing out until I run across your video
Excellent video I struggled for an hour to figure out how to put the cover back. I didn't know how to release the tension. Aglfter watching your video I rocked. Thanks for the help
I’m a 70 yr old stubborn project kind of guy who spent 45 min looking at the construction is and finally went to the tube. Yours was the answer for my situation. Well done and thank you
I have had a Stihl and never had this issue, just got a Husqvarna and went to change the chain the first time and fought and swore so much. Glad I was able to find this video, made it 1000x easier.
Brilliant! Seldom does one find such a clear instruction, both visually and verbally. Fixed my problem at once, after at least three hours trying to figure it out by myself.
Great to hear it was helpful! If it saved you some time and hassle, consider sharing it to help others or even sending us a tip to help support the work we do!
Thank you so much. While I didn’t get to this video before I spent two hours trying to fix it. I did only have to spend 5 minutes after to resolve the issue. Great video and thank you!🎉
Just purchased a new Husky 455 Rancher. The scrench that they include now incorporates a tool to reset the spring/chain brake band easily. I’m sure they can be purchased separately.
There should be a tension screw next to the base of the bar. Check out a video on our channel about replacing the tensioner screw. It may help you locate it.
Ah ha!! ...the pin is the "key"!😃 After struggling with this for 30 minutes I was hoping that somebody made a video about this since it's not exactly obvious.🤔 The brake drum kept "ringing" like a hotel desk bell 🛎and was really annoying the #@*! out of me!🤬 Thank you! Perfect and to the point video!
I felt exactly the same way when it happened to me. I thought, why can’t I find a video to help me! So, once I fixed the issue I broke it again to make the video. Really glad it’s helping so many people!
On thais chainsaw, which I think is the 235E, only one bolt get tight the cover, my the other bolt goes down when I push the cover in place, My is missing something, a nut? To hold the other bolt? The front one. Help please.
@@HowToVideoChannel Sorry, I wasn't clear enough with my explanation. The cover goes on fine, but the bolt that has threads on it, and I don't see what secures the bolt. My 455 Rancher has two nuts. This one only secured the cover against the bar, and the other bolt is there just so the cover does not twist?
So the bolts don’t go through the cover? Perhaps there is a plastic knob that you turn on the cover that the bolt is supposed to go into. You may want to Google search an exploded parts diagram of that model saw. Maybe one of the parts you have is the wrong one and that could be the issue.
@@HowToVideoChannel No, it's the original cover, that is how this old model is made. I mounted it, I guess the other bolt is just a post, no nuts. Look a the video and you will see what I'm talking about. Only the knob tight one bolt. I hammered the other bolt in to stay in place. Too bad that I can't post a picture here.
LET ME SEE IF I AM LIKE WITH YOU 1) I replaced a new carb on my HUSQ. 326 after many attempted it started but after a few minutes it died... Can you suggest me what to look for ?? 2) THE SPRING IN THE CLUTCH COME OFF IT TOOK ME HOURS TO PUT IT BACK ...what should I do if it happens again ?
You’ll have to compress the spring and get it back in place. A real pain. Check out the other comments, there is a tool available that helps compress the spring.
@@HowToVideoChannel Thank you for your replay I think I will make one as I work with steel ... May ask you how come there are air bubbole (?) in the fuel lines ?
Compress the spring. A difficult process. I placed a board over the cover and then used a flat screwdriver to push the spring down. You could also use clamps or a vise.
it's a stupid design causing wasting a lot of time for the consumers... Husqvarna should have recalled their products..US consumer agency should have banned their products.
You'll Need:
New Chainsaw Chain Brake Clutch Guard Cover
ebay.us/JHwQ4D
Phillips Screwdriver Set
ebay.us/EXOvdM
Flat Screwdriver Set
ebay.us/X6rSaz
I literally just stopped everything. I was doing took my gloves off just to give you a thumbs up. I was absolutely stuck on trying to figure this thing out until I run across your video
Glad I could help!
Please consider sharing the video to help others as well!
It is such a frustrating issue to have ruin your day.
Same here. Didn't realize the stop bar was locked in the stopped position and had to muscle it back free.
Thanks!
Ditto! The video kept me going in the field today 🫡
FINALLY!!! After unsuccessful attempts and 3 videos I find that... Thanks for the help
Glad it helped!
Excellent video
I struggled for an hour to figure out how to put the cover back. I didn't know how to release the tension. Aglfter watching your video I rocked.
Thanks for the help
Thanks so much for letting us know!
I’m really glad the video help you!
I’m a 70 yr old stubborn project kind of guy who spent 45 min looking at the construction is and finally went to the tube.
Yours was the answer for my situation. Well done and thank you
You are very welcome!
I’m so glad you found this video and that it helped you. Hopefully, you’ll enjoy our other videos as well.
I have had a Stihl and never had this issue, just got a Husqvarna and went to change the chain the first time and fought and swore so much. Glad I was able to find this video, made it 1000x easier.
Brilliant! Seldom does one find such a clear instruction, both visually and verbally. Fixed my problem at once, after at least three hours trying to figure it out by myself.
So glad the video helped! Thank you for the encouragement! Consider supporting this channel by sharing our videos with others or becoming a member.
THANK YOU FOR THIS VIDEO! I have spent days trying to get this cover back on and after watching this it went on in less then 5 minutes!
You're welcome! Glad it was helpful!
Please share the video to help others as well and consider sending us a tip to support the work we do!
So glad I found your video . Was struggling for about 30 minutes.
I’m glad the video helped you out!
Please share it to help others and consider sending us a tip to support the work we do!
You're a fine, man. Thank you for taking the time to show this...
I'm glad it was helpful!
Please share to help others as well!
Thanks mate. I was literally tearing my hair out. I'd buy you a beer if I could.
You can! Simply send a tip on this channel by using the “thank” option.
I’m glad the video helped you!
I wasn’t sure if this was the same case as me, and after messing with it a few hours i decided to try this. It fixed me right up. Thank you so much!
Great to hear it was helpful! If it saved you some time and hassle, consider sharing it to help others or even sending us a tip to help support the work we do!
THANK YOU, just solved my headache.
Glad to hear the video helped you!
Please consider sharing the video to help others and sending a tip to support the work we do!
Thank you so much. While I didn’t get to this video before I spent two hours trying to fix it. I did only have to spend 5 minutes after to resolve the issue. Great video and thank you!🎉
Glad it helped!
Consider supporting the channel by liking and sharing with others to help them as well!
That's brilliant spent an hour trying to sus it out. 6/11 /24. Simon, Cornwall UK.
Glad the video helped you!
Please consider sharing the video to help others or even sending a tip to support the work we do!
You saved my bacon!!! Thank you so much 🙏💪🙏
Happy to help!
Hope you can share the video with others to help them as well!
Exactly what I needed, thank you Sir!
Glad it helped!
Please consider supporting the work we do.
Just the video I needed to watch, thank you. I had just this probem, having removed the cluth cover with the chain brake engaged :)
Glad it helped! Please consider sharing the video to help others or even send us a tip to support the work we do!
Thank you very much for the explanation. It helped me a lot to understand how it works.
Glad it helped!
I have done this more than once. Had 2 wait weeks 2 get it fixed. Fought it 4 a while B - 4 I watched your clip. U da man ! thanks....
I’m glad you found this video helpful!
Thanks man!! Problem solved 😎
Happy to help!
I shouldve watched this before I started. I been Cussing at a my chainsaw for 20minutes. Thanks pal
So glad the video helped you! Feel free to share it to help other people or even send us a tip to support the work we do!
Dude absolute life saver only ever run saws with the 2 bolts this drove me crazy
Awesome! So glad the video helped save you time and money!
Thanks boss. Exactly what I needed to know!
Glad the video helped you out!
Hope you can share it to help others as well!
Bro you are legend
Great tip!
Glad it was helpful!
Fellow struggler here, thanks a bunch.
Glad the video helped you!
Holy Cow! THANK YOU!!!
You're welcome!
Hope it will help you and many others!
Much appreciated, I just had this issue and resolved easily now 👌
Glad it helped you!
Please consider supporting the channel to help others as well!
Thank you very much it helps
Very helpful! You saved me money thanks
Glad I could help!
Hope you like and subscribe to help support the channel!
Thank you this help me in 30 second to fix my chainsaw I'm glad see 👀 this video
Glad to hear the video helped you!
Took me three hours of confused Unga Boonga to figure this out lol. Thanks.
I'm glad you finally got it figured out!
Please share the video to help others!
Just purchased a new Husky 455 Rancher. The scrench that they include now incorporates a tool to reset the spring/chain brake band easily. I’m sure they can be purchased separately.
Awesome!
Thanks for sharing that!
Thank you, thank you, thank you!
You are so welcome!
Please consider sharing the video and supporting this channel.
Thank you!! I have a newer model so I didn't have to worry about the pin.
Great!
Now hire do you tighten the chain?
There should be a tension screw next to the base of the bar.
Check out a video on our channel about replacing the tensioner screw. It may help you locate it.
Is this common with Huskies because It happened to me last week and than I caught your vid which was excellent
It must be. I’m glad the video helped you!
Brilliant helps a lot!!!
Great to hear the video helped you!
Awesome!!
Thanks!
Ah ha!! ...the pin is the "key"!😃 After struggling with this for 30 minutes I was hoping that somebody made a video about this since it's not exactly obvious.🤔 The brake drum kept "ringing" like a hotel desk bell 🛎and was really annoying the #@*! out of me!🤬
Thank you! Perfect and to the point video!
I felt exactly the same way when it happened to me. I thought, why can’t I find a video to help me! So, once I fixed the issue I broke it again to make the video. Really glad it’s helping so many people!
On thais chainsaw, which I think is the 235E, only one bolt get tight the cover, my the other bolt goes down when I push the cover in place, My is missing something, a nut? To hold the other bolt? The front one. Help please.
You are having trouble putting the cover on because it isn’t lining up with the bolts?
@@HowToVideoChannel Sorry, I wasn't clear enough with my explanation. The cover goes on fine, but the bolt that has threads on it, and I don't see what secures the bolt. My 455 Rancher has two nuts. This one only secured the cover against the bar, and the other bolt is there just so the cover does not twist?
So the bolts don’t go through the cover?
Perhaps there is a plastic knob that you turn on the cover that the bolt is supposed to go into.
You may want to Google search an exploded parts diagram of that model saw. Maybe one of the parts you have is the wrong one and that could be the issue.
@@HowToVideoChannel No, it's the original cover, that is how this old model is made. I mounted it, I guess the other bolt is just a post, no nuts. Look a the video and you will see what I'm talking about. Only the knob tight one bolt. I hammered the other bolt in to stay in place. Too bad that I can't post a picture here.
Yeah, pictures would be nice.
LET ME SEE IF I AM LIKE WITH YOU 1) I replaced a new carb on my HUSQ. 326 after many attempted it started but after a few minutes it died...
Can you suggest me what to look for ?? 2) THE SPRING IN THE CLUTCH COME OFF IT TOOK ME HOURS TO PUT IT BACK ...what should
I do if it happens again ?
You’ll have to compress the spring and get it back in place. A real pain. Check out the other comments, there is a tool available that helps compress the spring.
@@HowToVideoChannel Thank you for your replay I think I will make one as I work with steel ...
May ask you how come there are air bubbole (?) in the fuel lines ?
Somehow air got in there.
Fill it with fuel so the fuel goes in the line.
thank you so much!
You're welcome!
Tanke you👍👍👍
You’re welcome!
How to put the spring back in the cover
Compress the spring. A difficult process. I placed a board over the cover and then used a flat screwdriver to push the spring down. You could also use clamps or a vise.
Merci, vous avez sauvé ma journée !!!!!
You're welcome!
Glad it was helpful, please consider supporting this channel with a like, subscribe, or donation.
😂😂😂 great video beer 🍺 for u bro
I appreciate it!
Sure helped me
That’s great!
Thank you sir.
You’re so welcome!
Awesome video thx your Amazon smiles link didn’t work
Thanks for the support.
Unfortunately, Amazon no longer contributes to charity and they discontinued Amazon Smiles.
There are people, we call them engineers, they tend to make stuff not line up after disassembly...
Very funny.
The husky 450 does not have that pin you referenced
Nice
So glad I'm not the only one infuriates me every time
Definitely not the only one :)
Yup I'm the struggle for an hour guy😅😂
Bummer.
Hope the video helped!
thanks bro been messing with this shi for 3 hrs
Haha! Glad the video helped!
Arigato mate 5stars
Thank you!
What even gets you into this situation
Taking apart the saw.
Damn, that's why I can't get the cover off!!
I didn't pull the brake first.
Glad the video helped!
Saved me alot of anger
Great to hear!
i love you
Glad to hear that!
😢👍
Hope it helped!
Good work .. Thankyou!!
Glad you enjoyed it!
I can't even get mine off lol.
Ah man!
it's a stupid design causing wasting a lot of time for the consumers... Husqvarna should have recalled their products..US consumer agency should have banned their products.
It has caused a lot of problems.
Hopefully, this video helps!