Irish Texas AMEN to that! He's completely converted me. Before, this type of thing was boring to me. But, his manner, voice, accent, and method have pulled me in. I'm subbing and buying some puzzles!
I like the analytical way you approach each problem. I have a friend who is an architect and besides other interests, difficult puzzles are a hobby for him. In past videos, you've mentioned similar phrases (2 or 3 dimensional for example) and it really is a different way of looking at the world. Thank you for your excellent videos!
I love listening to this guy. I have purchased one puzzle (so far) just by what he recommends. He is a great salesman (IMO) and I think I want to buy this puzzle.
Have you ever spoken to any of the actual creators of these puzzles? It would be fascinating to know how they come up with the ideas for these intricate puzzles!
A little larger diameter to hide the cut out and no hole in the bottom would make it even tougher to solve. Be easy to make a wooden version on a lathe.
As you said it has a very unique solution the fun for some difficult puzzles is , when you solve one by chance and you forgot the steps , you can not put it back easily , it is another challenge , so it is a double fun . thank you Mr. puzzle
if u dont release the cylinder before turning, the balls would just slide of to the other side again instead of falling directly into the hole i guess.
can u press the top cylinder in when the V is lined up with the notch...hold it pressed in..and slowly keep rotating the whole puzzle slowly and just have the balls fall in one by one with every rotation without ever letting go of the top piece that's pressed in? so can be solved in one push and 5 to 6 full rotations?
You can easily memorize where the opening are at and use your minds eye.While rotating it.Sort of like seeing with your hands with your eyes closed to find something in a familiar area.
Why not just put $100.00 in the envelop without signing your names? If the professor know & love you, then he or she would reply back to you. Long time ago, I found a tiger cub. I fed that tiger cub & nursed her back and set her free. 7 years later I came back to that place and was almost being attack by wild dogs. A tiger jumped out of nowhere and killed three wild dogs & made other run away. Then that tiger came to me and laid on her back, in front of me so I can reach down and hug her.
Hi Mr puzzle ...i think you are quite intiligent to be an invinter ...you have a pure mind ...why do'nt you be so ....??? i like what you do anyway ...go on....thank you so much ...
Oh I love this one!!! I too have yet to see this one before!!!! I didn’t hear you mention if this was stainless steel metal, or if this was manufactured from aluminum? I’ll be purchasing several of these and sharing with friends. Thank you for sharing it with me.
Couldn't you just press down and turn it all at the same time? The hole would remain open to the balls and they would be able to fall out one by one as you turned it?
My guess is, that the balls have some free space along the trench, so if you press the top, and just centrifuge it, a ball could have a chance to fit in the hole, depending on the rotation speed. But even if you figuere out where the hole is and once centered, you really have to turn the cylinder with the hole down
oh yeah, maybe fitting a small magnetic rod through the lower hole might attract the balls, so while rotating the top you feel the first ball get throught that aligned passage. But that is a post-viewing conclusion. I like the spinning idea and catching the momentum.
What is your difficulty rating for this puzzle? It seems awesome but hearing some people like you did it very fast and others very slow, it made me think
The mechanics of that reminds me of that puzzle. I have it, but can't get it open. It is a sphere instead of a cylinder, but it has three rotating rings that make up the body of the aluminum baseball sized sphere with a plunger button at the pole with ball bearings inside moving around.
You say the mechanism for opening is unique, but it seems similar in function and design to the _Titan Ball_ puzzle, which I am confident that you have heard of. In the _Titan,_ also fabricated of turned aluminum, it has two ball bearings, not five, and two dedicated detentes, not an axial path.
I have never solved such puzzles in my life and from the first sight I saw it i figured out that the V should be rotated in the other side opposite of the signature and then press it....
i could make the best puzzle ever, just a cylinder like this that only opens when you say the 1 thing a man has never said. "Wow my wife always seems to be right"
I have this one, and managed to solve it., but at 2nd try I screwed it totally. It is totally stuck now. Bought a second one, which I dare not to solve anymore :-)
Well, at 1:44 into this, and I'm thinking "This should be easy enough. You take a long nose punch and a big hammer and insert the punch into the hole at the bottom and you drive off the small cylinder cap. End of puzzle." I wonder if there are fake puzzles and if people have been burned by buying them.
there's a bunch of these puzzle solvers, but Mr puzzle is the only one I can stand to watch.
FLEB is pretty decent, but I still like Mr puzzle better. FLEB can be too nerdy and his voice annoys me
Irish Texas AMEN to that! He's completely converted me. Before, this type of thing was boring to me. But, his manner, voice, accent, and method have pulled me in. I'm subbing and buying some puzzles!
You prefer the German? That's crazy
Irishtherapist Big Moneyham I like him and Chris Ramsay
Chris Ramsay is great too, But i like Mr's Accent :D it makes me happy
Very elegant mechanism. I like the outward simplicity of the design. Enjoyable to watch.
It's possible the V stands for the roman 5, which should be a hint (5 balls inside). I'm sorry if you mentioned it and i missed it in the video.
No, I did not.
Very interesting hint!
That is exactly what I was thinking. I was going to post it and I seen you already did :)
Bitcoin buyNsell ..why, makes perfect sense.
The "V stands for his 5th production, and has nothing to do with how much balls are in there.
I wish my ex had had an indicator of how many balls had been inside her before we dated.
I like the analytical way you approach each problem. I have a friend who is an architect and besides other interests, difficult puzzles are a hobby for him. In past videos, you've mentioned similar phrases (2 or 3 dimensional for example) and it really is a different way of looking at the world. Thank you for your excellent videos!
the first cylinder puzzle is trying to open the biscuit tin while holding a cup of tea
Funny limited
Hello fellow British friend
Dandelion yep
I love listening to this guy. I have purchased one puzzle (so far) just by what he recommends. He is a great salesman (IMO) and I think I want to buy this puzzle.
Have you ever spoken to any of the actual creators of these puzzles? It would be fascinating to know how they come up with the ideas for these intricate puzzles!
+Mark Criss Hi Mark, that's an interesting point for the future I guess.
Mr.Puzzle I KNEW you sounded like the guy from The Room. You typing Hi Mark has confirmed it!
A little larger diameter to hide the cut out and no hole in the bottom would make it even tougher to solve. Be easy to make a wooden version on a lathe.
I did not hit her I did not hit her oh hi mark
Oh hi mark
looks like an herb grinder if you know what I'm saying
Thought the same when holding it in my hands the fist time :)
Nope.
Zingtron god you sound so gay.
big pumkin head ass jim I get you (;
big pumkin head ass jim snoop Dogg would be proud
As you said it has a very unique solution
the fun for some difficult puzzles is , when you solve one by chance and you forgot the steps , you can not put it back easily , it is another challenge , so it is a double fun .
thank you Mr. puzzle
You should try and crack the Lament Configuration--also known as Lamarchand's Box. It's hard to come by and devilishly notorious to solve.
+Jay Lamm Thanks for the hint! I will try to get one.
That one may not be worth the price.
Hellraiser right?
Jay Lamm notoriously hard to solve? as opposed to notorious to solve.
Jay Lamm *Notoriously devilish.
I love your accent! I find your videos very soothing to watch and listen too. Thank you:)
Nathan Anderson fuck You
+Diego Salinas what?
+Diego Salinas the hell
Well even a 12 year old teenager can use youtube. Unfortunately...
Blackrover H Well if he's 12 he's obviously not a teenager😐
Wait, do you actually have to press and release the top cylinder between each ball?
Wouldn't it work if you just press and start rotating/rolling it?
+Georgi I think there are faster ways then the way I did. But you need to rotate the big cylinder to get the balls move completely inside.
if u dont release the cylinder before turning, the balls would just slide of to the other side again instead of falling directly into the hole i guess.
thats so cool! would be good to see the action of what you were doing with the scope in the bottom
Mr.Puzzle nice vids! You should do a riddle at the end of each video and answer it in the next video
Took me 2 days using pen and paper to try and track what troubleshooting steps I had already taken LOL TY for showing how to put it back together.
Sir, you are truly a puzzle genius! I truly enjoy your videos.
this guys the new Bob Ross
except bob ross was missing a finger and was in the army
dooterscoots Air Force.
bob ross beats the devil outta this
Watch stevemre1989. He is the most relaxing to watch. Its strange, but relaxing abd informative.
So satisfiying whene he preses it and makes the noise
can u press the top cylinder in when the V is lined up with the notch...hold it pressed in..and slowly keep rotating the whole puzzle slowly and just have the balls fall in one by one with every rotation without ever letting go of the top piece that's pressed in? so can be solved in one push and 5 to 6 full rotations?
You can easily memorize where the opening are at and use your minds eye.While rotating it.Sort of like seeing with your hands with your eyes closed to find something in a familiar area.
That's an unusual and well made puzzle that makes you think
Mark Innes oh hi mark!
to assemble again, around 10:00, what happened to the magnet?
You can't get it on the link listed it's not on the page at all.
I want to buy it there is no link in the description
Unfortunately it is very rare and difficult to get. I did not find a link where to buy it.
Mr.Puzzle if you come across a link to buy this in the future, will you be so kind as to post it as an update to this video? Thanks!
Where did you get that little camera with the led lights on the end of it?
It's not a cheap puzzle to buy.
Running close to $100.00.
That is too expensive for me to buy for my daughter.
But your review was nicely done.
angelisone it looks like you can make it yourself for much cheaper
Not unless you will provide good directions.
100 fucking dollars for cnc machined aluminum,,, wow im in the wrong fucking business.
APCWORLDSUXAZ What's expensive is not the material, it is the thought that put into making this puzzle
Why not just put $100.00 in the envelop without signing your names?
If the professor know & love you, then he or she would reply back to you.
Long time ago, I found a tiger cub. I fed that tiger cub & nursed her back and set her free.
7 years later I came back to that place and was almost being attack by wild dogs.
A tiger jumped out of nowhere and killed three wild dogs & made other run away. Then that tiger came to me and laid on her back, in front of me so I can reach down and hug her.
everytime i watch your videos i fall asleep so i use this remedy for my insomnia love ur videos 😊
Do more puzzles like this one and the box one
I like puzzles that the process to reassembly is different from the process to disassembly.
Hi Mr puzzle ...i think you are quite intiligent to be an invinter ...you have a pure mind ...why do'nt you be so ....??? i like what you do anyway ...go on....thank you so much ...
I love Mr.puzzle he is so cool and humble
Can it be used as a storage for a small note or something similar?
Show me a link to buy that tiny camera please!!!
what about its rating
4/5
I never woulda figured this one out! Great Video!!
Hi Mr.Puzzle, any chance you can make a video on Wil Strijbos' Aluminium Cross?
Wo hast du das Rätsel gekauft? Online oder gibt es hier in Deutschland einen laden wo man das erwerben kann?
tks for showing this interesting puzzle. Can you share the link of where to buy it from? Tks
+William L I bought it directly from the creator.
Can you give a link where you got your pen microcamera? Thanks
When will you try the Lemarchand's box? I hear the Lament Configuration is the hardest to figure out.
i want to ask you from where do you get those puzzles , i realy want to try them.
It appears you could align the transfer passage once, then evacuate all the balls by tilting and rotating.
I like the way he says unique.
did you forget the link to buy this puzzle?
Where did you get the mini-camera ?
thank you for your videos
Welcome!
I wonder where the link to get it is...
Where did you put the magnet
Oh I love this one!!! I too have yet to see this one before!!!! I didn’t hear you mention if this was stainless steel metal, or if this was manufactured from aluminum? I’ll be purchasing several of these and sharing with friends. Thank you for sharing it with me.
Hi, Please let me know where i can order one, I checked amazon , its not there
Where can I buy this puzzle? I see no link in the description for this puzzle
Hey Mr. Puzzle, how do you get your audio recording to sound so clean without any background noise?
Beautifully machined
great video sir..👌
Thanks!
Mr Puzzle , you should do ASMR, your voice is relaxing and the sounds of everything you do are crazy good for ASMR , like so he can see!
Couldn't you just press down and turn it all at the same time? The hole would remain open to the balls and they would be able to fall out one by one as you turned it?
No. It's not made that way. The fist ball will keep the second from entering the cylinder.
My guess is, that the balls have some free space along the trench, so if you press the top, and just centrifuge it, a ball could have a chance to fit in the hole, depending on the rotation speed. But even if you figuere out where the hole is and once centered, you really have to turn the cylinder with the hole down
oh yeah, maybe fitting a small magnetic rod through the lower hole might attract the balls, so while rotating the top you feel the first ball get throught that aligned passage. But that is a post-viewing conclusion. I like the spinning idea and catching the momentum.
Dude that sound 2:55 kills me man
Tell him to do the elephant next because I love them just as much. Plus you know it came with two or three of those tricky puzzles
Somehow klemmt hier🤣 sehr schön! Hätte ich sein können... Ich mag deine Videos.
Hey Mr. Puzzle, where can I buy the puzzles you solved in your channel?
What is your difficulty rating for this puzzle? It seems awesome but hearing some people like you did it very fast and others very slow, it made me think
Great Vid. Will try to find this puzzle in my travels. :)
where do you buy puzzles like this?
Echt gute Erklärung auch bei den anderen Videos!
When i see ur first hanayama puzzle solution i already sub xD love ur vids keep making it so i can cheat to my friends when they have one xD
Nice to have you here!
The mechanics of that reminds me of that puzzle. I have it, but can't get it open. It is a sphere instead of a cylinder, but it has three rotating rings that make up the body of the aluminum baseball sized sphere with a plunger button at the pole with ball bearings inside moving around.
You say the mechanism for opening is unique, but it seems similar in function and design to the _Titan Ball_ puzzle, which I am confident that you have heard of.
In the _Titan,_ also fabricated of turned aluminum, it has two ball bearings, not five, and two dedicated detentes, not an axial path.
Wow. That's a very creative puzzle!
Whats the name of this puzzle and who is his creator?? Pleaseeee
any links to get this puzzle?
the only place I come when I'm in the mood for a puzzle solve with a side of spectator colonoscopy.
Excellent. Thank you
Cool videos you have,I'm subscribing! hehe
Cool!
Please make some videos on logic word puzzles / riddles!
+Kenshar1984 You have any special puzzle in your mind? If yes, please let me know the name or manufacturer.
Very interesting idea!
I will check about the possibilities to do that.
Thanks!
Great video sir!
+Ibtihaj Khan Thanks!
Where can I purchase the cylinder puzzle?
Leider kann ich keinen Link finden, wo ich das Puzzle bekommen kann 😔
I have never solved such puzzles in my life and from the first sight I saw it i figured out that the V should be rotated in the other side opposite of the signature and then press it....
so where can you buy this
So where is the link???
where can i buy this puzzle?
hard to use pepper shaker
What if it Exploded when you opened it up
Is Wil Strijbos a machinist?
It's a Roman 5, meaning the amount of balls you must release, and a guide to show the orientation of the solution
I’d like to buy this puzzle but cannot find any link for it... is it still available?
Thank you...
Very impressive! But I was drinking and didn’t catch the re-assembly. Looks confusing. That’s why your a better man than me.
that'd make a cool little safe mechanism if there was some space inside
schönes video, ich hoffe auf mehr guten content (:
+Vladi Putin Ist schon in Arbeit
What happened to the magnet?
I wonder if combination locks use a similar mechanism
i could make the best puzzle ever, just a cylinder like this that only opens when you say the 1 thing a man has never said. "Wow my wife always seems to be right"
:D
MR.PUZZZZZZZZZLLLLEEEEE! Nice content!
I have this one, and managed to solve it., but at 2nd try I screwed it totally. It is totally stuck now. Bought a second one, which I dare not to solve anymore :-)
What's the point of the magnet?
+yuri778 It does not belong to the puzzle. I only used it to keep the steel balls from rolling away.
You spend more money on puzzles than me on my jordan collection
Very nice
Well, at 1:44 into this, and I'm thinking "This should be easy enough. You take a long nose punch and a big hammer and insert the punch into the hole at the bottom and you drive off the small cylinder cap. End of puzzle." I wonder if there are fake puzzles and if people have been burned by buying them.
Now that balls are magnetized it may be a different puzzle altogether - possibly shut forever.
just hydraulic press it. problem solved 😁
Soreofhing
Violence is usually the answer.
Soreofhing you don't do well with jokes, do you?
Deadlyaztec27 violence is underrated and people usually think its bad.
LycanElite
To those I say, life is pain... but so is death, hahaha.
The main challenge is to solve the puzzle in such a way that you can reassemble it again