Mr.Puzzle Your method in finding the solution restored my faith in humanity again. That's what you'de expect from your students and actually any normal human in any normal country. *It was therapeutical, thank you realy👍
If I was locked in a cell with food and water and told I was allowed to leave once I solved this puzzle, I would have bitten through my wrists before getting past the fiddling stage
The pin getting stuck is a very serious problem. You could solve it correctly, but it gets jammed making you think you took a wrong turn and cause you to not retry the correct path
I work for the firm that manufactures these, this is a simple one. The more complicated ones are crazy, we've got a drawing of the part, a map, and still struggle to solve it.
@@conrrr possibly to do with the little Wells etc in it. Some of them were wildly complicated, if I recall right some even had moving components inside that formed little "bridges/Gates" but only when orientated a certain way.
If its still stuck... my Granny used soap. Can you guys visit my site and if you ever have a great story and want to make a movie holler! www.imdb.me/ricklee 😎
Well to clarify for all three of you. Lead was used commonly in pencils from conception, when the effects of how poisonous the element was, was learned then the switch to graphite was made. For exact years I suggest further research. It is highly unlikely to get lead poisoning from the modern day pencil. I can not say absolute certain that it is impossible, since I do believe a small portions of lead are still mixed in for some reason.
CsmatrixTR awesome im not the only still thinking about crysis 3 :p. What a coincidence tho. I was watching some crysis 3 videos today including where psycho GF, claire died :p one of the best emotional scene!
CsmatrixTR that's utterly BS lmao fucking weirdo, has nothing to do with "solving" a puzzle..and no not "literally", and yes its a joke but still even as a joke you have to bring it properly/^^^ before more people are going to hate this comment ( you stupid as)
I was going to leave a comment suggesting pronouncing "unique" less like "eunuch" - but reading the previous comments, I feel I need to clarify that I mean this in a purely helpful, albeit somewhat jocular spirit :)
To take it apart keep the dots lined up and twist it upside down so the dots are toward the ground, then tap it on your hand. The most important thing is make sure the dots stay aligned.
This is a good puzzle and it's a progress based puzzle so a logical approach, exactly like the way you planned it, guarantees succeeding at it. I don't know how soon you considered using calipers and measuring but I don't think I'd have thought of it until later on after a few steps and then coming back to it later as a solution always comes to the calmer mind. The longevity of this puzzle would be vastly improved if it was made in a way that there were changeable puzzle sleeves that fitted the inner core and could be swapped out or even exchanged with other people who have a different puzzle. If the longer and more difficult puzzles changed in direct response to your actions, that would be a great feature.
There is a trick to the last part. Once the two dots are aligned, Invert the puzzle so that the Revomaze logo is pointing down and tilt the puzzle about 45 degrees so that the main body is lower than the center shaft. Now, while holding the shaft, gently (sometimes harder) tap the main body on a relatively hard surface like a carpet or piece of wood that you don't care about damaging. Once the pin becomes loose, the center shaft should slide right out. Hope this helps and that the explanation wasn't too confusing.
Thank you! As a Electro/mech designer of many decades, this was a most intriguing puzzle design. I have been looking at many puzzles with an eye to buying a few. This will be on the short list.
Well done. I would have gotten pissed off after about 20", used a diamond cutter wheel on my dremel tool and cut it open to see how the damn thing worked.
A high speed metal cut off wheel, or angle grinder with a thin cut off blade for metal would be correct. Using a Dremel would be more dangerous than handy for something this size as they tend to break off disks on deep cuts. Diamond blades will cut metal but they heat up quickly and the heat ruins the diamond bond which strips the diamonds off, ruining the blade.
@MR PUZZLE , very good description doing that graph afterwards. I think I saw you do a couple years ago, but this is much better than the other Revomaze Blue I just saw. Nice laying it out for us again
I think this is my favorite puzzle you've done. Are there different colors with different mazes? If so, could you review them? Also, have you considered doing some logic pen and paper puzzles on your channel?
The only reason this is a 4/5 is because revomaze makes the same type of puzzles that are even more difficult. If revomaze only made this puzzle it would be 5/5
Imagine something within the puzzle had gone wrong and we are trying to solve it... We are not able to solve it because the damn thing is broken... And we on the other hand will question oru ability to solve it... JUST IMAGINE....
Hi Sudoku champ here...lol... I really believe in giving kudos where kudos are due. KUDOS!! These puzzles seem like just ho-hum for you but for me the viewer the time and brain cells you take and spent showing step by step ...no words..just thank you. Incredibly nice for people to take time to prove to the rest of us how dumb we really are!! LOL just kidding. But seriously thank you...and you got me on the April 1st Giraffe puzzle...but I'm ready for it next month!!!! Bring it on !!!!!!!!!
Nope. The desmodromic hub operates on the gears of gearshitf. It´s not a free piece as into this video. If you shift wrong, the gears can be damaged. You can move the desmodromic to increase and reduce your gear speed with the clutch. But the operating mechanism is totally similar.
"Hi! And welcome to another episode of Mistah Puhzlle" :D Oh, this one is 20 minutes long, no way I will remember that o.o EDIT: Oh no, now map, pen and paper. This just got 10 times harder.
This would be a nice project to see if you can control a small motor with an Arduino or some other controller to move the shaft really fast and solve the puzzle. Imagine a computer algorithm that could come up with that map in the same way that the micromouse contest cars solve mazes by trying all possible routes. It will do all turns and pulls trying to memorize which was the map that worked.
The message looked hand signed, that shows class. There's a lot of value added and actual payoff to have the possibility to exchange messages through effort and patience.
Try using centripetal force to spin the pins outward and release. When you’re at the end of the puzzle, don’t spin the inner maze core, spin the entire large cylinder (as one piece) by rolling it like a baker’s rolling pin on a table. Rolling/spinning it really quickly could spin the pins outward and release them from the center cylinder. Just a thought. I’ve never held one of these, so I have no idea if this would actually work. Also, maybe put a little WD40 on the pin holes so they slide in and out more easily. It shouldn’t ruin the puzzle, as the pins releasing the inner cylinder won’t open it without the maze being solved (I think).
Every now and then I come across your channel randomly, and I watch a bit of intro, get interested, then have to stop. I don't want to watch your videos because I don't want to know anything about them. I want them to be as puzzling as they can possibly be, if I should ever get that puzzle. EDIT: Why do I still gets comments on this.
Mr P. There is NO chance I would've had the patience to solve this! It would definitely have been launched into low earth orbit after 30 minutes! I am VERY impressed with your logic skills! WELL DONE!!
If you read the small card that came inside the box, when you get the dots aligned, you turn it label side down and give it a small tap. that drops the one tumbler out of the sleeve into the shaft... I just went by feel and muscle memory. Neat puzzle, and I ordered the Bronze for another challenge.
Once again my friend I finding myself drawn to your videos... as always I’m feeling much better after then before... you have a gift, thanks for sharing it with us .... I really happy you provide a spoiler break option
I’m from Texas USA, aber ich kann deutsch und ich liebe deine Videos mein Freund mein Opa hat mir deutsch gelernt er war in Deutschland 1944 mach weiter so mein Freund!!
As far as I understand, the pins are not spring loaded. Would it be possible to escape a trap by holding the puzzle‘s axis vertically and spinning the barrel in order to move the pins out of the trap by centrifugal force? Also, if you hold the barrel horizontally with the pin axes parallel to the ground, there would be no force to pull any of the pins into a trap, no?
you are truly the master of disaster, the master of Puzzles. I would really like it if there werent any traps because that just makes it frustrating, also i never understood what happens if you fall in a trap. do you have to start all over again? Or what was the consequence...
If there were no traps you Could just Keep turning and twisting and pushing and pulling till the end without really figuring out how the maze Inside looks.
I'm stuck for one year with the bronze before the euro or Star Trek sign (managed the pool and Jacuzzi all right), so yes if you could show how you map a dynamical one, that would be great, without too many spoilers.
Certainly a very interesting puzzle. I don't know if I like these puzzles enough to spend that much time figuring it out, but I'm glad you did. Looks very time consuming and a bit complicated. Very nice job.
I've loved puzzles of all types since I was very little. Now this is calling my name! Stopping video, so I don't spoil the challenge! I'll come back after i get this for myself. Thanks for an excellent channel. New subscriber here. 😘
Got this thing as a birthday present 2 years ago and promised the person who got it for me I wouldn't look anything up about it. Just beat it today. Granted it sat in storage for most of that time. One of the more difficult things in my life I've encountered. Up there with breaking up with my girlfriend after over a decade of dating and losing my mom. Two thumbs up.
I thought the same at first but the pins have to go in not out, so using centrifugal force to move the pins won't work. You need to align pins with the holes in the shaft. One of the holes is slightly larger than the other. Get the pin to fall in the smaller hole first, then turn the cylinder just a fraction of a fraction of a millimeter so the one pin won't fall back into the outer casing and the other pin can fall into the other hole. Then pull the whole thing out.
No one said it existed. It is an outward force apparent in a rotating reference frame. I.E the force that would be felt on the pins if you spun the puzzle around like a top/centrifuge. It does not exist, yet it can be measured.
![เจ็บที่ยังฮัก - ม่อน วรวิทย์ [ Official Mv ] จอนนี่มิวสิค](http://i.ytimg.com/vi/KALIGSRSjFs/mqdefault.jpg)
Available here:
www.revomaze.co.uk/?product=v1-blue
Mr.Puzzle Your method in finding the solution restored my faith in humanity again. That's what you'de expect from your students and actually any normal human in any normal country.
*It was therapeutical, thank you realy👍
Mr.Puzzle ii
Awesome!! I really admire puzzles! It helps one think incessantly and it's really interesting!
Mr.Puzzle . Analytical Skills = Shake the hell out of it until something opens
biatinobear----- Nah, a sledgehammer and a hacksaw, less of a headache.
Can you imagine him on the next Saw movie ?
JigSaw = Hello Mr.Puzzle ... I want a pla............ How the hell did you solve that ???
sahin gece jajaja
Had the same thought. Or the puzzle from hell raiser
this comment made my day haha
Best comment! :D
(Mr Puzzle standing with one arm, a missing eye, burns all over his body, and a missing jaw): "It was actually very simple"
"Doesn't matter if there's a certificate. Doesn't increase the value."
Savage.
You must be the most patient man in the world. I genuinely found the idea of solving this physically uncomfortable.
If I was locked in a cell with food and water and told I was allowed to leave once I solved this puzzle, I would have bitten through my wrists before getting past the fiddling stage
@@toasterdrippings that's hilarious, David!
@@toasterdrippings what does that say about you as a person?
@@TrippyGSR That I make funny words on the internet sometimes when I'm on the toilet
...But I already knew that
@@toasterdrippings your comment fits perfectly with George Castanza 😂😂😂
The pin getting stuck is a very serious problem. You could solve it correctly, but it gets jammed making you think you took a wrong turn and cause you to not retry the correct path
Agreed
Yes indeed, make you wondering do you in right move or not.
But that adds to the challenge lol
@@AhDollar in the wrong way
@@AhDollar no it doesn't.
"it gets a little confusing", Understatement of the decade i reckon lol. How you managed to work this out at all is amazing. Well done!
I LOVE this type of video - not just showing the solution, but also teaching the method of thinking. Very pedagogical!
do you rate any puzzles a 5? does there have to be physical risk of danger?
Talis116 The Impossible Giraffe puzzle. He needed to call in an expert.
Talis116 Cast equa
Hello World yea that one was really hard to solve
Talis116 he rated The Pento T a 5/5 difficulty (video The Most Difficult Jigsaw Puzzle you've ever seen- The Pento T)
Yes, Talis, there does. If you try to open a 5-rated puzzle the wrong way, it is designed to remove at least one of your finger tips!
Holy shit. I wasn't expecting the puzzle to be that crazy. Wow lol
Mike Gorbet When you pull out a piece of paper and a caliber the puzzles going to get crazy
My favorite part 15:16
4:54. If you don’t pull out, you’ll definitely be in a trap.
that's what she(he) said
Kitsch Puffer Fish 🤣
+Jon K. Someone mentioned Traps? :D
Hahahahaha this guy...
Hahaha
I would consider this puzzle higher than a 4, 9 out of 10. I would have disassembled it with a hacksaw long before I ever got to the end.
He rated it 4 out off 5.
which is less than 9/10
9 out of 10? that's only a tenth higher than Mr. Puzzle's rating, not really much to argue there...
rovers141 but 8/10 doesn't feel right about how hard the puzzle is
how? 9/10 is harder than 4/5
I work for the firm that manufactures these, this is a simple one. The more complicated ones are crazy, we've got a drawing of the part, a map, and still struggle to solve it.
Pretty sure 75% of people who tried to solve this puzzle will get a saw machine. Harder than this? same answer.
Hey have you seen about the pin getting stuck at times? Should we look into that?
@@conrrr possibly to do with the little Wells etc in it. Some of them were wildly complicated, if I recall right some even had moving components inside that formed little "bridges/Gates" but only when orientated a certain way.
Dude, is it still being made?? Can't find it anywhere
@@HelciusCabral they're called "Revomaze", we made a batch a few weeks ago so they're definitely available somewhere.
I got stuck on opening the box..
too funny
It's a magnet, it's not that hard.
Andy DeLeon, do you know what sarcasm is?
Andy DeLeon u know joke fp 😑
haha_ its_me its just not funny
You sir are a GENIUS, I commend you on your problem solving skills, now can you help me with my zipper it's stuck and I have to go!! Good Job!!!
And what about lead poisoning lol!
Patman the pencil lead is actually graphite it is commonly called lead thats all.
If its still stuck... my Granny used soap. Can you guys visit my site and if you ever have a great story and want to make a movie holler! www.imdb.me/ricklee 😎
Well to clarify for all three of you. Lead was used commonly in pencils from conception, when the effects of how poisonous the element was, was learned then the switch to graphite was made. For exact years I suggest further research. It is highly unlikely to get lead poisoning from the modern day pencil. I can not say absolute certain that it is impossible, since I do believe a small portions of lead are still mixed in for some reason.
Some soap to apply only on each side of the zipper and open and close several times
The design and engineering of this puzzle is top class
This guy can run crysis 3 with max settings in his brain! Literally...
true story
CsmatrixTR awesome im not the only still thinking about crysis 3 :p. What a coincidence tho. I was watching some crysis 3 videos today including where psycho GF, claire died :p one of the best emotional scene!
CsmatrixTR that's utterly BS lmao fucking weirdo, has nothing to do with "solving" a puzzle..and no not "literally", and yes its a joke but still even as a joke you have to bring it properly/^^^ before more people are going to hate this comment ( you stupid as)
Drerr Aj74 its called a metaphor a pc takes an insane amount of computing power to run on max settings
Me too
This makes me think of the locks that R2D2 solves to open doors and hack things, but just solves them really fast lol
best comment iv seen in my entire life
Fun fact: those were called scomp link ports. (*) The More You Know (*)
TheEAtoday is
Milkshaker I've*
TheEAtoday oil
As soon as I heard the accent I'm like, it's probably gonna be a hard one.
:D
"If I did something wrong , let me know"
Im pretty sure your the best here. Mr.Puzzle.
No one can give you any suggestions lol.
Woodie Plays learn fucking grammar
there are plenty of assholes out there, just give no regard to whatever he said
I was going to leave a comment suggesting pronouncing "unique" less like "eunuch" - but reading the previous comments, I feel I need to clarify that I mean this in a purely helpful, albeit somewhat jocular spirit :)
What’s the best? And yes, you put a space before the comma.
I'm rather surprised by the negativity in the comments over here, but otherwise interesting content Mr Puzzle
If patience is a virtue, you, my friend, are the patron saint
Hehe
There are more of this kind
Although my (ocd) patience would flip with a 20% gradient on the work top. Things must stand still :-)
what a maze runner holy moly
but no life
How you figured this out mathematically is incredible! I didn’t understand a single bit of it but it was incredible none the less!!
I thought the paper in the end was a signed apology
Sui mase
lol I thought it was a check for a money back guarantee if you solve it lmao
Patience level: expert.
Congratulations mate, impressive
It is always a pleasure to watch an episode of Mistu Pazul!
To take it apart keep the dots lined up and twist it upside down so the dots are toward the ground, then tap it on your hand. The most important thing is make sure the dots stay aligned.
I recently discovered your channel and I can't stop watching XD
true its great
elena 13 the Mr. Puzzle Effect :D
It will do that to you: once you’re in you’re hooked!
#relatable
ME TOOOO
Sir, YOU, are a genius! I couldn't figure out that maze if my life depended on it!
This is a good puzzle and it's a progress based puzzle so a logical approach, exactly like the way you planned it, guarantees succeeding at it.
I don't know how soon you considered using calipers and measuring but I don't think I'd have thought of it until later on after a few steps and then coming back to it later as a solution always comes to the calmer mind.
The longevity of this puzzle would be vastly improved if it was made in a way that there were changeable puzzle sleeves that fitted the inner core and could be swapped out or even exchanged with other people who have a different puzzle.
If the longer and more difficult puzzles changed in direct response to your actions, that would be a great feature.
That's what the Bronze does. It's a dynamic puzzle!
Mr.Puzzle do you have a link for this one? I know someone who would love that!
www.revomaze.co.uk/?product=v1-blue
There is a trick to the last part. Once the two dots are aligned, Invert the puzzle so that the Revomaze logo is pointing down and tilt the puzzle about 45 degrees so that the main body is lower than the center shaft. Now, while holding the shaft, gently (sometimes harder) tap the main body on a relatively hard surface like a carpet or piece of wood that you don't care about damaging. Once the pin becomes loose, the center shaft should slide right out. Hope this helps and that the explanation wasn't too confusing.
LMAO
Thank you! As a Electro/mech designer of many decades, this was a most intriguing puzzle design. I have been looking at many puzzles with an eye to buying a few. This will be on the short list.
And this was the easy one? Shit, i'm dumb.
Haha you need to look up the gold or silver one.
Well done. I would have gotten pissed off after about 20", used a diamond cutter wheel on my dremel tool and cut it open to see how the damn thing worked.
Which is also a good learning curve, where you will figure out that the diamond disc is the least effective tool to cut aluminium.
lol!
Gábor Móczik just out of curiosity because I don't know either what would you use?
A high speed metal cut off wheel, or angle grinder with a thin cut off blade for metal would be correct. Using a Dremel would be more dangerous than handy for something this size as they tend to break off disks on deep cuts. Diamond blades will cut metal but they heat up quickly and the heat ruins the diamond bond which strips the diamonds off, ruining the blade.
After about 20 inches?
Please don’t stop making videos...cause these videos are GEMS 💎!THANKS SO MUCH FOR MAKING THESE!👍❤️❤️❤️❤️❤️❤️
"24mm times pee"
😁
Mr.Puzzle Pi is pronounced as 'Pai' ✔, rather than 'Pee'✖.
its not, the greek "pi" is pronounced as "pee".
Damn you beat me to it. Damn you and your pee. Lol
PEE PEA PI PIE WHO ...3.14
you can basically write your own message and send it across enemy lines to your buddy double agent to read it D:
The sending would be interesting...
Whatsapp
yea but anyone who can solve the puzzle can read it, What if they have Mr Puzzle working for them!?
or if they have a hacksaw.
Just use a hydraulic press to push the metal bar out .
@MR PUZZLE , very good description doing that graph afterwards.
I think I saw you do a couple years ago, but this is much better than the other Revomaze Blue I just saw.
Nice laying it out for us again
Looks like a training device for lock picking.
unci narynin 😂
huh, so it's like a safecracker training puzzle
You are right somehow
Yup
Nicholas de Vera have you seen the Schlock 250?
Please, safes ain’t got nothing on this
Mr.Puzzle Can you do a video on safecracking? It's technically a puzzle.
I think this is my favorite puzzle you've done. Are there different colors with different mazes? If so, could you review them?
Also, have you considered doing some logic pen and paper puzzles on your channel?
When you took the core out I was like
WTF
Albert Sancho same
Same
hahaha fuking same tho
The certificate was a nice touch I thought.
i liked it too
Not impressed.. Should have been an ancient tresure map
A $100 bill inside would have been a better surprise than a certificate.
The only reason this is a 4/5 is because revomaze makes the same type of puzzles that are even more difficult.
If revomaze only made this puzzle it would be 5/5
basically they are out of stock of everything
Just a 4/5😂 you my friend are a genius
This is for beginners! 2/5 max!
+U.V. S. lol 2018 june
You're doing it wrong. It's up up down down left right left right A B select start.
Jason Bourne, Little correction: B A, not A B.
Jason Bourne classic
Is that the blood code for mk? Lol
select start means you had friends...
Plus it's 2 "b, a" s
You open it up at the end and it sprays anthrax into your face
Kinda looks more like the oil that turns wikus into an alien in District 9 tho
Why am I dying laughing at your comment
So it will only kill the smart people, brilliant!
Lmao savage af.
Slow down satan, lol
Imagine something within the puzzle had gone wrong and we are trying to solve it...
We are not able to solve it because the damn thing is broken...
And we on the other hand will question oru ability to solve it...
JUST IMAGINE....
sreerag s ram pretty sure they test every puzzle separately to ensure that doesnt happen... but surely wouldve been a pain
Praise Lord Oru
Hi Sudoku champ here...lol... I really believe in giving kudos where kudos are due. KUDOS!! These puzzles seem like just ho-hum for you but for me the viewer the time and brain cells you take and spent showing step by step ...no words..just thank you. Incredibly nice for people to take time to prove to the rest of us how dumb we really are!! LOL just kidding. But seriously thank you...and you got me on the April 1st Giraffe puzzle...but I'm ready for it next month!!!! Bring it on !!!!!!!!!
Wow no more puzzles made out of wood with strings attached to ball. You've really upgraded my friend. ☺👍
Marcus Tuuhetoka only a little
Haha 😂
Hey, still one of the hardest puzzles in his lineup is the Tricky Dick according to his playlist and that's a wood/string puzzle.
kalloused *dEeK*
What kind of genius came up with that design?
Not exactly, look:
cdn.wallapop.com/shnm-portlet/images?pictureId=384661837&pictureSize=W640
It´s similar to motorbikes gearshift.
So if you shift a motorbike wrong, does it take you back to where you started?
Nope. The desmodromic hub operates on the gears of gearshitf. It´s not a free piece as into this video. If you shift wrong, the gears can be damaged. You can move the desmodromic to increase and reduce your gear speed with the clutch. But the operating mechanism is totally similar.
I've done some 3d printed versions of this before. It's not a new idea.
I want to know too
You are the first person that I have subscribed to in over two years on this site. Good on you!
Yay, that's great feedback! 😊👍
@@Mr.Puzzle Whatever happened to that Bronze version of this you said you had? :P
Your english has improved a lot since the start of the channel !
I really enjoy to see some positive comment about my English every few month! 😁
Your English is just fine. No need to worry about it.
youre' english improVed since the start of the video !
Is there a Mrs Puzzle?
intersting
Women are the most difficult puzzle of all
He has a wedding ring so yeah
I havent figured out why i enjoy watching you figure out the puzzles, But i do . thanks Rusty
"Hi! And welcome to another episode of Mistah Puhzlle"
:D
Oh, this one is 20 minutes long, no way I will remember that o.o
EDIT: Oh no, now map, pen and paper. This just got 10 times harder.
Not too hard 😉
Lmao Mistah Puhzlle
CircleNoob i
Ahmed Shaikha What a brilliant idea! 👌 🙌 💡
ooo, idea: put ink on the maze of the inner barrel and roll it onto paper?
Frank Fletcher oof
Haha national treasure
Frank Fletcher I
Frank Fletcher calm down he's saying AFTER u finish the puzzle so u still need to go through the pain of solving it
May Lee this was gay af also. Stop being a keyboard lawyer.
This would be a nice project to see if you can control a small motor with an Arduino or some other controller to move the shaft really fast and solve the puzzle. Imagine a computer algorithm that could come up with that map in the same way that the micromouse contest cars solve mazes by trying all possible routes. It will do all turns and pulls trying to memorize which was the map that worked.
Definitely doable
I think the signed certificate was meant to be a surprise thankyou for buying his product and solving it. Think you missed the point.
it was a nice touch
You speak of the god of puzzles, he needs no 'congratulations' from a peasant
He did warn you about spoilers
It should say Certificate of Completion not just Certificate of Ownership
The message looked hand signed, that shows class. There's a lot of value added and actual payoff to have the possibility to exchange messages through effort and patience.
Maybe the pins at the end need to move outwards into the aluminium part? You could try spinning the entire puzzle on the table and see if that works
I just think it needs lubrication.
Yeah it just needs a good screwing
yea hhats what i rgought 2
This is what I was thinking as well. Also lubrication could help.
Or put the end of a vacuum hose on it and suck the pins in.
Im a banjo teacher, Bluegrass banjo and Music in general are a big puzzle. I love puzzles, thanks for posting.
Very Cool, liked this video, love watching you do these puzzles
I personally hate it. 4 minutes of intro? like WTF...
Imagine if it had a trap at the very end and you you're like yeah I'm about to finish and bang you need to start again 😂😂 I would have gone maaad xD
That would be a great one 😂
Draab07 Kay 6
but you should be fine as long as you mapped it out like he did
Try using centripetal force to spin the pins outward and release. When you’re at the end of the puzzle, don’t spin the inner maze core, spin the entire large cylinder (as one piece) by rolling it like a baker’s rolling pin on a table. Rolling/spinning it really quickly could spin the pins outward and release them from the center cylinder. Just a thought. I’ve never held one of these, so I have no idea if this would actually work. Also, maybe put a little WD40 on the pin holes so they slide in and out more easily. It shouldn’t ruin the puzzle, as the pins releasing the inner cylinder won’t open it without the maze being solved (I think).
You mean centrifugal force, which is outwards. Centripetal is the force towards the center.
Every now and then I come across your channel randomly, and I watch a bit of intro, get interested, then have to stop. I don't want to watch your videos because I don't want to know anything about them. I want them to be as puzzling as they can possibly be, if I should ever get that puzzle.
EDIT: Why do I still gets comments on this.
That's why I add the spoiler break. The decision is up to you!
I didn't even know there was a spoiler break! But I think, for me, part of the puzzle is figuring what the challenge is at all!
Staticzxz back in your shanty. You've just been sat down. Jog on.
Staticzxz He tells you what the challenge is before the spoiler break.
we call this phenomenon a "personal life choice", very subjective and great for you, m8! did you buy the revomaze and complete it?
Mr P. There is NO chance I would've had the patience to solve this! It would definitely have been launched into low earth orbit after 30 minutes! I am VERY impressed with your logic skills! WELL DONE!!
Ok after several videos, I finally realized he’s saying Unique, NOT Eunuch.
Jesus, why no timestamp? I want to hear that...
Thanks!
ohhhhhhh
Haha
Once you solve it you've got a Brand new Vape ! wow !
Ernham lmao
Might be on to something. Imagine having to solve it every time you want to partake in the filthy habit.
If you read the small card that came inside the box, when you get the dots aligned, you turn it label side down and give it a small tap. that drops the one tumbler out of the sleeve into the shaft... I just went by feel and muscle memory. Neat puzzle, and I ordered the Bronze for another challenge.
These puzzles are the best I own SEVEN... nothing is better that being stuck in a section of a harder one and figuring out what to do to progress!!!!
Which one you own?
Mr.Puzzle
Plastic:
Blue (red), black
Metal:
Orange, aqua, bronze, silver, and gold
Gold is the only one I haven't opendd
When Mr. puzzle said shit, it's like jesus christ saying shit, I got confused a little bit?! lol 😁
rvfjone mmm a weird ideation
rvfjone when?
After he falls into the trap at 15:16 he says a naughty word.
This is crazy... I'm fascinated by the fact that you have a good idea of how to get the point.. By drowning and calculate.. Bravo!
so thats how Germans solves puzzles XD
the master race
🤣
The warning: knowing the solution is NOT reversible.
Me: with my memory it is
Kill me
Hahahahaha right?
Your voice makes these videos so charming, the puzzles are intriguing too of course, love these videos 😊
Instructions unclear got my finger stuck in the ceiling fan
Averagepabiker same
Aaaaah, another trap 🤔
How to understand girls...
Grizzly nah, this is a lot easier.
Yes this is seems like a Piece of Cake when compared to that Topic.
easy when you dont have ulterior motives and a need to be appealing.
Grizzly sorry, but ur dum.
I think idk maybe I'm dumb but women ain't much more complicated than men
Thue Morse
You must be a woman then :)
Once again my friend I finding myself drawn to your videos... as always I’m feeling much better after then before... you have a gift, thanks for sharing it with us .... I really happy you provide a spoiler break option
*S H I N Y*
Just right after I got off those memes.
*SHINee hehe
*mY PrEciOus*
SHINNYYY. love that song.
MOANAAA
Perfect_Poop nope.
this guy's a geniouse one of the reasons i love his vidioes
Lol "geniouse". You a funny guy.
Your communication skills are brilliant. Thumbs up for that aspect alone
I’m from Texas USA, aber ich kann deutsch und ich liebe deine Videos mein Freund mein Opa hat mir deutsch gelernt er war in Deutschland 1944 mach weiter so mein Freund!!
Danke, dein deutsch ist wirklich sehr gut!
Yeah and I’m from ct and I know german
Ich bin deutsch und kann deutsch. Crazy i know
Josh tha savage 😂
I don't need brilliant, I have rick and morty
to be fair, you have to have a very iq to understand rick and morty
I've never been fascinated by math before, but I love puzzles so this is awesome!
1-11 minutes is litterally just him saying "then you fall into da trap" and measuring things
Navigating Vietnam in a nutshell.
Send it to LockPickingLawyer please.
Or BosnianBill!
He would pull some gallium on it and scratch some.
I remember having one of this made from plastic back in the 90's. You also had different colors back then.
As far as I understand, the pins are not spring loaded. Would it be possible to escape a trap by holding the puzzle‘s axis vertically and spinning the barrel in order to move the pins out of the trap by centrifugal force? Also, if you hold the barrel horizontally with the pin axes parallel to the ground, there would be no force to pull any of the pins into a trap, no?
The pin need to move inside the center. 🤔😕
The pin used for navigation is spring loaded. The other pin doesn't do anything other then hold the core in the shaft.
I'm convinced 80% of these commentators would try to put out a fire by throwing their fire extinguisher at it.
You mean your not sapost to do that ?
It doesn't work?
And I thought fire extinguishers were for when you eat hot peppers...
The more you know :o
What's a fire extinguisher?
That one friend who invites you to play a new game and then doesn't let you learn how to play, nice name
This is such a unique and interesting approach to solving a difficult puzzle. Keep making videos dude 👍👍👍
you are truly the master of disaster, the master of Puzzles. I would really like it if there werent any traps because that just makes it frustrating, also i never understood what happens if you fall in a trap. do you have to start all over again? Or what was the consequence...
Major Tom you have to go back to the start
Major Tom yes you have to start all over
The traps are sections of the puzzle that are deeper, so once the pin falls into the trap you have to go back to the start to get into the maze again.
the maze is hard enough to be then adding traps like that...
If there were no traps you Could just Keep turning and twisting and pushing and pulling till the end without really figuring out how the maze Inside looks.
@Mr.Puzzle When will you post bronze review ?
I'm stuck for one year with the bronze before the euro or Star Trek sign (managed the pool and Jacuzzi all right), so yes if you could show how you map a dynamical one, that would be great, without too many spoilers.
Certainly a very interesting puzzle. I don't know if I like these puzzles enough to spend that much time figuring it out, but I'm glad you did. Looks very time consuming and a bit complicated. Very nice job.
oh man, put a 100$ bill in the core for a present :D
I really want to buy it but the website isn´t working :( Do sombody know why ? Or is it just a problem from my side ?
Ach der Kreis. Keys Kreis? 2 Jahre zu spät. Verdammnt^^
I've loved puzzles of all types since I was very little. Now this is calling my name! Stopping video, so I don't spoil the challenge! I'll come back after i get this for myself. Thanks for an excellent channel. New subscriber here. 😘
It's Germans like this guy who were responsible for the genius of the Enigma Encoder..haha!
+FunkteonRecordings And Brits like the others that broke it. XD
Actually Polish scientists broke the Enigma code
Yea. But they somehow deciphered all the messages as Hitler's recipe for strudel.
How did I get to this video at 2 in the morning
Jacob Allen 1:23 am for me 😂💁
1:00 AM
Edit : I feel so stupid now
03:04 am right now.
03:42 right now here
Jacob Allen
Right its 2:57 am lol
Got this thing as a birthday present 2 years ago and promised the person who got it for me I wouldn't look anything up about it. Just beat it today. Granted it sat in storage for most of that time. One of the more difficult things in my life I've encountered. Up there with breaking up with my girlfriend after over a decade of dating and losing my mom. Two thumbs up.
I think you're meant to spin the puzzle at the to put both the pins in their slots.
I thought the same at first but the pins have to go in not out, so using centrifugal force to move the pins won't work. You need to align pins with the holes in the shaft. One of the holes is slightly larger than the other. Get the pin to fall in the smaller hole first, then turn the cylinder just a fraction of a fraction of a millimeter so the one pin won't fall back into the outer casing and the other pin can fall into the other hole. Then pull the whole thing out.
hmmmm
Centrifugal force literally does not exist
No one said it existed. It is an outward force apparent in a rotating reference frame. I.E the force that would be felt on the pins if you spun the puzzle around like a top/centrifuge. It does not exist, yet it can be measured.
lilypop! He means centripetal force.