What a fantastic video. Concise, informative, and tells you everything you need to know when replacing a cassette for the first time. Question: Do you need to use grease/lube on any of the components?
Are most all spacers the same thickness within the each assembly ?....again controlling part sequence in the assembly is very important especially for non pros....great video thank you
When I installed the cassette on my shimano freehub using Parktool FR5 and a spanner wrench, the hub clicks and stops tightening as if there is an internal torque release mechanism built in. I haven’t seen that in any videos. Is that normal? I’m not even using a torque wrench.
Yes you may. Consider your current length now. Then proceed. New shifter so chain is in the figure in the front figure in the back pull the chain together with you and see if you have any excess links. You need at least one extra link or to actually see if you have a one by
I've heard that it's possible to upgrade from 9 speed to 11 speed cassette. So besides the 11 speed cassette, which other components would I need to complete the upgrade on my road bike?
Great vid. No massive introduction; perfect balance of instruction and advice - thank you!
Glad it was helpful! Thanks for the feedback. Just don't look at my older videos lol.
So informative!! thank you for putting it on ring by ring, i was getting so confused when doing my own!!
Your welcome. Thank you⚙️⚙️
Excellent video. Really appreciate it. Especially the closeup and putting each piece on separately with the spacers 🙌
Your welcome. Thanks for watching. ⚙️
Perfect! Wasn't sure how to use the spacers correctly, as straightforward as it sounds now... 😅👍
Nice!
Thanks for this vid. I'm about to shop for a new cassette and this is a handy reference.
What a fantastic video. Concise, informative, and tells you everything you need to know when replacing a cassette for the first time.
Question: Do you need to use grease/lube on any of the components?
No, none needed, but you may hear otherwise. if you do, very thin coat., transparent.
Very good instructions!
Thank you Terry!
Great vid, thanks so much for sharing. 👍
Glad you enjoyed it
Thanks this was helpful!
Are most all spacers the same thickness within the each assembly ?....again controlling part sequence in the assembly is very important especially for non pros....great video thank you
Many thanks. Very informative 👍
You are welcome! Thanks for feedback.
Thanks for the video! Do you recommend putting some kind of grease like Park Tool PPL-1 on the free hub body before installing the cassette?
Hi. No, it’s been fine without line. I have not seen any negative effects. I would as some to Sram XD Threads.
When I installed the cassette on my shimano freehub using Parktool FR5 and a spanner wrench, the hub clicks and stops tightening as if there is an internal torque release mechanism built in. I haven’t seen that in any videos. Is that normal? I’m not even using a torque wrench.
Do you know if is compatible with CS-M8000?.
Thank you!!
Your welcome!
If I go from 32 to 34 tooth cassette, will I need to lengthen the chain? Thinking about upping my climbing gear for a mountain trip coming up...
Yes you may. Consider your current length now. Then proceed. New shifter so chain is in the figure in the front figure in the back pull the chain together with you and see if you have any excess links. You need at least one extra link or to actually see if you have a one by
I've heard that it's possible to upgrade from 9 speed to 11 speed cassette. So besides the 11 speed cassette, which other components would I need to complete the upgrade on my road bike?
Chain, shifter, rear derailleur. Most likely the crankset(chainrings), front der. It’s a big jump, so 8 think everything.
Great video. Just as (constructive) feedback - it's only 720p resolution - to help people see the detail it would be better if you can film in 4k.
I will consider that. Good feedback. Thanks
Thank you:)
i will replace shimano 32teeth 11s casette with sram 11 36,hub 11s...should i use spacer,
Keeping with 11 speed hub body? No spacer needed.
@@BikeTeacher thanks a lot,and which one is better for shimano ultegra drive train only casette is sram 1170 11x36. HG 701 or PC 1130 chain.
I'm falling asleep
Ouch!