Thanks for the video, I was able get my door back on line. Although I bought an assortment of plastic clips instead of bending the rod,still very helpful 👍👍👍.
Thanks man, i did it your way in the end. I bought the plastic pieces in Autozone for like 4 dollars, put in on the locking rod, but for the love of god i could not force it in the whole, and i was trying for like 30 minutes lol. So i just took it off, bent the tip a little like you did, and noe it works like a charm
4 vids on youtube about fixing stuck rear Silverado ext cab doors and all 4 of them are stuck on the bottom.... Of course. Mine is stuck on the top part... Here I go reinventing the wheel again!
Grateful Nomad Will the bottom latch operate if you pull the rod up using your hand? I’m just wondering if there’s not enough tension from pulling the handle to release the bottom latch. If that is the case then you might need to replace the handle. They’re cheap and also cheaply made.
@@ebkbode The handle actually broke off a while back when it got real cold so I have been manually pushing the lever. When I reach down and pull the rod it is being fully extended and I can hear the latch release but the door will not open. It will open at the top but not the bottom. I sprayed it down with WD40 and put a screw driver in there and tapped it with a hammer to tet and break the rust free but it did not help.
Grateful Nomad Damn that sucks. You may need to jimmy the latch with whatever you can find? It’s hard to say without seeing it myself. If you are able to jimmy the latch open, then obviously don’t close it again without repairing or replacing the worn component. Good luck man.
I saw another guy, same problem, he used a crowbar under the door because over time they can sag. This took pressure off and he wiggled back and forth, pulled lever and it release. Maybe use some penetrating oil first.
you sir are a life saver. Got it back to working so I can use it once every ten years !
Your a saint bud. Love the tutorial!
Thanks for the video!!! Solved my problem on my 01 Silverado.
Thanks for the video, I was able get my door back on line. Although I bought an assortment of plastic clips instead of bending the rod,still very helpful 👍👍👍.
You’re welcome! Who knew this was such a common issue…
Where did you buy the clips from, could you please send me a link?
You're a gentleman and a scholar, Your kindness is only exceeded by your appreciation for mankind!
Damn. The information & video was extremely helpful, but you act as though you want to marry the guy. Geez. 😕
Thank you! I got it fixed in under 10 minutes after watching your video.
Thanks man, i did it your way in the end. I bought the plastic pieces in Autozone for like 4 dollars, put in on the locking rod, but for the love of god i could not force it in the whole, and i was trying for like 30 minutes lol. So i just took it off, bent the tip a little like you did, and noe it works like a charm
Awesome, thank you. Now I can use my door again! Ps. I also have melted crayons in my cup holders 😅
Haha, melted crayons gives the door character. I’m glad the vid helped. 🤙🏻
Thank you. I believe you saved me about $150 or more. Did it myself. 😄🙂
JACKPOT!! Exactly the video I needed, thanks for posting it!
You’re welcome!
Great video. Thanks for taking the time to make it. Mine just stopped opening today. Thanks again
Thanks for the video, explained my issue perfectly.
Thanks sharing your experience. made the job so much easier knowing what to do.
A little all over with the camera, but I sure appreciate the video! Great job!
Thank you for this video much appreciated!!
Wow, Great video. Also, thank you for not telling us about your life's story. Anyway, Thank you.......
Thanks alot. you saved the day.
Thank you for the video!! 👍🏽
AWESOME DUDE THANK YOU
4 vids on youtube about fixing stuck rear Silverado ext cab doors and all 4 of them are stuck on the bottom.... Of course. Mine is stuck on the top part... Here I go reinventing the wheel again!
Make a video lol
@@ebkbode no camera... my phone doesn't do that stuff.
One handed even. Awesome! Thanks for this.
Great video!!!!! Thank u sir for your help
Jimmy Inglish Absolutely! 👍🏻
Awesome video, 👌 thank you very much!
Thanks I used a hallow wall fastener and put it in that hold and the lower rod
Thank you
Thank you for making this video I just fix my truck 😁
Elphoenix1 No prob!
Thank u sir.
Exactly what I needed, thank you!
It wrkd. thanks big!
Let’s hope it’s this easy to fix mine
Thanks great explanation
What happen both rods are hooked up and bottom latch won't unlock ..wd 40 over and over any help
Parts are discontinued could not replace the clip so I had to improvise
Was the door panel difficult to get off with the door shut & rear seat folded down?
Eric Jansen I just popped out the forward side and reached in to pull up on the rod. After I opened the door, I took it off...
It’s a bitch to get off, just be careful and slow and you shouldn’t brake anything. When the door won’t open there isn’t a lot of space to work with
My actual latch at the bottom won’t open. All rods attached I think what ever is on the latch broke
My latches won't open even when I pulled manually right on the latch.
My rod is working but the bottom latch will still not release for the door to open. Suggestions?
Grateful Nomad Will the bottom latch operate if you pull the rod up using your hand? I’m just wondering if there’s not enough tension from pulling the handle to release the bottom latch. If that is the case then you might need to replace the handle. They’re cheap and also cheaply made.
@@ebkbode The handle actually broke off a while back when it got real cold so I have been manually pushing the lever. When I reach down and pull the rod it is being fully extended and I can hear the latch release but the door will not open. It will open at the top but not the bottom. I sprayed it down with WD40 and put a screw driver in there and tapped it with a hammer to tet and break the rust free but it did not help.
Grateful Nomad Damn that sucks. You may need to jimmy the latch with whatever you can find? It’s hard to say without seeing it myself. If you are able to jimmy the latch open, then obviously don’t close it again without repairing or replacing the worn component. Good luck man.
did you ever get rear door lower latch to work ??? I have same problem.
I saw another guy, same problem, he used a crowbar under the door because over time they can sag. This took pressure off and he wiggled back and forth, pulled lever and it release. Maybe use some penetrating oil first.
Bottom latches froze locked
How can I remove it
did you ever get rear door lower latch to work ??? I have same problem.
Same problem here
Anyone figure this out? I think I have the same issue
I had the same issue, after lubing and beating for hours with no luck i got a working door from the junk yard and swapped the door.
Thank you so much man