Derek you are still capping out at 20k views step it up! Do something never done before with a 10 speed or anything other than the content you normally put out do something bro you can do it!! You can!!
Love the dedication of filming a hours a day and then editing and posting on the same day after being busy with family and spending time with loved ones. We would understand if you didn't upload but just know we appreciate the dedication to keep us with you and inform us. Thank you Derek bc you and Jake make my days when yall upload I love watching Jake's vids at 6 then two hours later seeing you upload it just makes my day and I really appreciate you both. Can't wait for the next mustang tour!
I love both challengers and chargers. Challengers can look menacing but i cant get past their weight. My friend just out his RT challenger on the scale and it was over 4500lbs.
@@TheModAddict I have an '18 Hellcat and it's not something that's nearly as bad as everyone claims. The car handles the corners fairly well, some basic mods and it does wayyyyy better than it should for the weight.
@@YoteNick it’s plenty of people that have built hellcats / ScatPacks / demons . Stock for stock mustang loses a built base GT will out power a built hellcat easily
@@SwavoRambo that's fine. I just know from experience that Mopar boats are slow. Personally, my gen 2 coyote is boosted and there is nothing in south Florida besides a plaid beating me.
Hey Derrick while your car is stock see if you can run a 15-17 6R80 with some minor bolt ons and exhaust. I’m curious how efficient these 10 speeds are against the 6 speed autos. I figured bolts ons would help in the horsepower dept too to make it fair
I'm not certain on the exact differences (as far as specs go), but I have a 17' 6 speed auto and there's quiet a big difference between mine and the 10 speed auto. Both take off and top end the 10 speed is more effective as expected. I'd say the only place that feels somewhat even is from a dig vs the 10 speed. Mine is mostly stock outside of aftermarket exhaust and tires.
@@cynicchris3883 I have a 17 GTCS 6R80 3:55 rear end with the Ford Power pack 2 installed and a Borla Atak Catback. My sister in law has 19 10R80 and when I drove her 10R80 stock the car had balls. I don’t know if I can say it’s faster but when that car kicks over in 2nd in track it throws the car fwd. My 17 has balls top end. If I launched it I think I would take that 19 but I don’t know lol, never raced one. I’d like to see what my 17 would do against a 10R80 and an experienced driver
@@Sick_ridz Have your sister race you just to get an idea. I also have the Ford power pack 2. With 305s Nittos in the back and 285s in the front. Corsa extreme cat back exhaust system. Mine definitely has balls but it has nothing for my buddies stock automatic 10 speeds. There's quiet a bit of work to be done to my vehicle if I want to match a stock 10 speed. Which is why mine is in the shop now getting a 2018' intake swap.
@@Sick_ridz 3.55s. I considered 3.73 or 4.10s as my next mod, but ultimately decided 3.55s will be better for a SC in the future. Which rear end does yours have?
You are only an hour from Charlotte? I was just there last week doing the mach 1 track attack at Charlotte motor speedway drove the X.3 M both ways and was pleasantly surprised of how well it handled the tail of the Dragon! :-)
Why don’t you activate the digital gauges in the centre of the digital instrument cluster? You have got so many options-linelock, diff temp, automatic transmission temperature, vacuum, inlet air temperature and heaps more.
Cute and sweet. Hang on to her bro, they are super rare. Car is looking good. What’s your take on the 24? I was holding out on getting a new s550, until the the 650 dropped. But the 650 looks so good, I don’t think I can pass it up.
You put the shifter in S mode so it’s in paddle shift mode. You downshift to gear you want to start in and then stomp the gas and once the car gets higher in the revs you click the shifter up once into auto mode and let the car do the shifting. Car shifts way faster then you do with paddles.
my black 01 Cobra haha sitting with no front wheels in the parking lot, been there for over a year hahaha. Wish PowerCurve would start on my car. Mention it to them give them some motivation to start :)
I was pulling it down in sport and just leaving it and my hard shifts 2-3, 3-4, have smoothed out a lot harder a wot but smooth down low now. Drove my beauty to Disneyland (6hr trip) 81 up the grapevine under 2k rpm’s with a/c on too! Love that cruise control!
I would like to get you down here in New Orleans. You’ll be surprised on how deep we coming with the mustangs. Plus I’m in one of the largest mustang clubs in the south. And the charity work we do in the community is unheard off. Also I have a vert that I think will change your mind on not liking them. Great content bro
Very Nice, I picked up a new 21 GT in Jan. this year. Black with Black Accent and the A10. It is a beast for a stock GT. Just subbed to your channel now I need to go back and see what you have dont to your exhaust. Great video.
Love your videos keep up the hard work I'm glad youre loving the new car you deserve it I'm super excited to hear about the new merch can't wait to get it
Bro that's how it was for me lol we went to a meet in ablemarle as soon as we parked our car I rolled my window up immediately with pouring down rain🤣😭
Bro keep em coming. You should do your mod list ideas/goals the next one . Also , would you consider methanol instead of E85 once you start your build for NA ?
Another great video! Those calipers are close to the color I’m going to paint the ones on my 19. I’m wanting to paint mine the same or close to same as my highlighter green mountain bike. I think it would look pretty good against the magnetic exterior and black wheels.
I’d be curious if it was performance pack on performance pack. Not only did he have less gears he also had less gear. 3.31 vs your 3.55. You’d win either way bet would be slightly better race
Watch this video please!! th-cam.com/video/2jQhFzmJ57M/w-d-xo.html
@DerekBaranProductions is that aftermarket exhaust I hear...
Derek you are still capping out at 20k views step it up! Do something never done before with a 10 speed or anything other than the content you normally put out do something bro you can do it!! You can!!
What's the exhaust setup for her/your car
‘You are a little Libby’ had me rolling
The wheels on the other Gen3 were sick. Gotta paint the calipers and get some aftermarket wheels for Hades, bro.
Lol said the same thing wheels were clean
I appreciate it! They're Vossen HF-5.
TWO BLACK GT's brother!!! Thank you for great content! Love to see it! Beautiful S550's
Love the dedication of filming a hours a day and then editing and posting on the same day after being busy with family and spending time with loved ones. We would understand if you didn't upload but just know we appreciate the dedication to keep us with you and inform us. Thank you Derek bc you and Jake make my days when yall upload I love watching Jake's vids at 6 then two hours later seeing you upload it just makes my day and I really appreciate you both. Can't wait for the next mustang tour!
Also , I’m a Mustang guy but those challengers/chargers are growing on me. Would you do some content/runs with those guys ?
I love both challengers and chargers. Challengers can look menacing but i cant get past their weight.
My friend just out his RT challenger on the scale and it was over 4500lbs.
@@TheModAddict I have an '18 Hellcat and it's not something that's nearly as bad as everyone claims. The car handles the corners fairly well, some basic mods and it does wayyyyy better than it should for the weight.
Idk why anybody would like Mopar boats... this 10r80 with e85 and a few bolt-ons will gap a hellboat. It's all over TH-cam. 10 speed a cheat code.
@@YoteNick it’s plenty of people that have built hellcats / ScatPacks / demons . Stock for stock mustang loses a built base GT will out power a built hellcat easily
@@SwavoRambo that's fine. I just know from experience that Mopar boats are slow. Personally, my gen 2 coyote is boosted and there is nothing in south Florida besides a plaid beating me.
Pita wheel is a dope spot. Glad y’all enjoyed it
Romina’s face when you said “this is the best purchase I’ve made in a long time” 😂 she was like “oh really? Not my engagement ring?”😂
Does anyone know what’s the widest tire you can fit on a s550 in the rear without any cutting
Hey Derrick while your car is stock see if you can run a 15-17 6R80 with some minor bolt ons and exhaust. I’m curious how efficient these 10 speeds are against the 6 speed autos. I figured bolts ons would help in the horsepower dept too to make it fair
I'm not certain on the exact differences (as far as specs go), but I have a 17' 6 speed auto and there's quiet a big difference between mine and the 10 speed auto. Both take off and top end the 10 speed is more effective as expected. I'd say the only place that feels somewhat even is from a dig vs the 10 speed. Mine is mostly stock outside of aftermarket exhaust and tires.
@@cynicchris3883 I have a 17 GTCS 6R80 3:55 rear end with the Ford Power pack 2 installed and a Borla Atak Catback. My sister in law has 19 10R80 and when I drove her 10R80 stock the car had balls. I don’t know if I can say it’s faster but when that car kicks over in 2nd in track it throws the car fwd. My 17 has balls top end. If I launched it I think I would take that 19 but I don’t know lol, never raced one. I’d like to see what my 17 would do against a 10R80 and an experienced driver
@@Sick_ridz Have your sister race you just to get an idea. I also have the Ford power pack 2. With 305s Nittos in the back and 285s in the front. Corsa extreme cat back exhaust system. Mine definitely has balls but it has nothing for my buddies stock automatic 10 speeds. There's quiet a bit of work to be done to my vehicle if I want to match a stock 10 speed. Which is why mine is in the shop now getting a 2018' intake swap.
@@cynicchris3883 what rear end do you have?
@@Sick_ridz 3.55s. I considered 3.73 or 4.10s as my next mod, but ultimately decided 3.55s will be better for a SC in the future. Which rear end does yours have?
Killin it bro can’t wait for the west coast tour.
What drive mode you in
It's dope to see you so happy with the purchase
Summer is about to be full of 🔥 content
“You are a little libby” 😂😂😂
you guys are a dream couple, so heartwarming to see!
The car sounds great man!
That’s was a amazing race with other s550 with hades
0:22 - 1:01 mail order is such a disney goof
What are your plans with the sliver back mustang Derek
Really pumped you got the gen 3
Hey man im up in mooresville driving a stock c6 ls3 car, Id be down to do some runs
1:12 happy mothers day to cat lady romina
Derek are you changing the rear tires to 305 or 315‘s
He said "you are a little Libby so..." 😆😆😆
ayeeee grind don’t stop 💞
Richmond...cool...I'm near Charlottesville. Keep up the great vids!
Where is that shop located in Charlotte and what’s the name of it
Hell yeahhh Derek that's how you race the 10r80 😤💯
Yeah man, what happened on that last run? Can’t leave us hanging on those details lol
LOVING the content. As a gen3 10r80 owner and former gen 1 mt82 owner this is just
Looks like you won Derek! Love all the mustangs!!!
Don’t underestimate your videos bro . All are bangers 👌🏽
So true
Nah fr
You are only an hour from Charlotte? I was just there last week doing the mach 1 track attack at Charlotte motor speedway drove the X.3 M both ways and was pleasantly surprised of how well it handled the tail of the Dragon! :-)
Why don’t you activate the digital gauges in the centre of the digital instrument cluster? You have got so many options-linelock, diff temp, automatic transmission temperature, vacuum, inlet air temperature and heaps more.
Love pita wheel just moved to Gastonia from the beach and that’s the first place my girl wanted to go too
Cute and sweet. Hang on to her bro, they are super rare.
Car is looking good. What’s your take on the 24? I was holding out on getting a new s550, until the the 650 dropped. But the 650 looks so good, I don’t think I can pass it up.
Talk more about power curve Motorsports! In the Carolina’s with a gen 2
All that 10r80 needs is e85 tune and a few bolt-ons and you will destroy hellboats and everything else on the road.
My boy Derek official keep up the great content brobro
Are you using the paddle shifters on the race in the intro ? Or does your exhaust just sound that way when you slow down ?
You put the shifter in S mode so it’s in paddle shift mode. You downshift to gear you want to start in and then stomp the gas and once the car gets higher in the revs you click the shifter up once into auto mode and let the car do the shifting. Car shifts way faster then you do with paddles.
Is that stock exhaust? Sounds louder than mine did when mine was stock then again it didn’t have active exhaust. Would that be a difference in sound?
Love your vids man just want you to know that you are my Netflix bro
lovin the content derek keep it up excited for the new vehicle 🔥
my black 01 Cobra haha sitting with no front wheels in the parking lot, been there for over a year hahaha. Wish PowerCurve would start on my car. Mention it to them give them some motivation to start :)
Nice vid, I'm from Charlotte, next time you're here we should get some runs in, my 18 mt82 made 440 on power curves Dyno with a tune only.
Got my Mach 1 with the 10r80. It really does rip. My wife has the 10r60 in her explorer st and it performs wonderfully as well. Amazing transmissions.
Bro its crazy seeing all the roads cause im on them all the time😂 crazy you saw that lambo ive never seen them around
Do that mustang place tune cars and dyno
Good job on the vids bro been watching for a while keep it up
1:30 deek been eyelids puffed af
I was pulling it down in sport and just leaving it and my hard shifts 2-3, 3-4, have smoothed out a lot harder a wot but smooth down low now. Drove my beauty to Disneyland (6hr trip) 81 up the grapevine under 2k rpm’s with a/c on too! Love that cruise control!
I love the ride man I love the ride I just got my 2021 couple days ago they are nice for sure enjoy brother be safe
I live in Charlotte Nc but you trynna do some runs with a Camaro zl1 and a corvette
No bolt on's? Maybe some bolt off's, exhaust is very loud, is that factory?
Killin the game brother ⛽️ 🔥
She got the bag 💵💰💰💰
Hwy 321 between Gastonia and Lincolnton is a great place to run.
Romina's bag is dope! I have an LV belt, and it's really nice 👌
So you going to have which car say just married on it when you get married? Happy for you!
Girls gotta have their toys like us guys!
@@Nathan-qz3mg that's a good question. Maybe my MR2 Turbo for the nostalgia, but idk. It was my first car and I've had it for 10 years now
Bruh I'm from Gaston Co and never had Pita Wheel lol hope it was good. May have to finally check it out
I actually enjoyed this
10:52 he says while wearing a new rope chain bracelet
great video as always!
Love your guys contents👏🏻😊I will definitely visit you guys sometime after I come back from my deployment.
I would like to get you down here in New Orleans. You’ll be surprised on how deep we coming with the mustangs. Plus I’m in one of the largest mustang clubs in the south. And the charity work we do in the community is unheard off. Also I have a vert that I think will change your mind on not liking them. Great content bro
Finally racing
Exhaust?
Awesome video can’t wait to see the new vehicle tomorrow.
Just found your channel man and loving the content 🔥❤️plus you driving my dream car 🥵
Nice bag 👍
I love the mustang 😍
Very Nice, I picked up a new 21 GT in Jan. this year. Black with Black Accent and the A10. It is a beast for a stock GT. Just subbed to your channel now I need to go back and see what you have dont to your exhaust. Great video.
That 10r80 is insane Jesus
Love your videos keep up the hard work I'm glad youre loving the new car you deserve it I'm super excited to hear about the new merch can't wait to get it
Same
What tires are on the car rn?
What exhaust is on the stang
Bro let me know next time you are up here. Love to meet y’all in person and check out the cars
Get a prenup bro. Worth it.
What exhaust is on this car man?? I love the sound of this it’s exactly what I’m looking for on mine
Stock active exhaust
Exhaust setup?
That intro ☠️☠️☠️
I like most anything with muscle I’ve owned multiple mustangs Camaros and chevelles, bikes, I like power, enjoyed the video
Them 10 speeds are fast!!
I would love to see Stock Hades vs Tylers Scatty
@DerekBaranProductions,
You need to program your cars garage door opener and get rid of the after market garage door opener.
Bro that's how it was for me lol we went to a meet in ablemarle as soon as we parked our car I rolled my window up immediately with pouring down rain🤣😭
Bro keep em coming. You should do your mod list ideas/goals the next one . Also , would you consider methanol instead of E85 once you start your build for NA ?
E85 > Meth, no real reason to go meth if you’re NA.
Great video tbh 🔥
What happened with that last run? Why was that dude pissed?
Following
Yeah bro that was odd. Derek looked legit concerned
Another great video! Those calipers are close to the color I’m going to paint the ones on my 19. I’m wanting to paint mine the same or close to same as my highlighter green mountain bike. I think it would look pretty good against the magnetic exterior and black wheels.
Thanks for grinding
dang those 10spds are fast as hell but i can't not get a stick.
Thats why i like my car its fun for a daily and it cruises nice
Tricky tune ftw trust
I hope charlotte treated you nice. What a vid man
I’d be curious if it was performance pack on performance pack. Not only did he have less gears he also had less gear. 3.31 vs your 3.55. You’d win either way bet would be slightly better race
Hades is a beast
Ya the Gen 3 mt82 is pretty lack luster considering how much HP they make stock. My old bolt on tuned Gen 1 beat bolt on tuned mt82 Gen 3s no problem
Pita wheel is the best, the Dallas location is the og one, go there next time
Great video bro
Great content 🔥👌🏾