Hello, I have a 170 petrol w169, and I have a problem when starting the car when it is cold, start on 3 cylinders and after a few minutes start the engine error p007b, p0304, then turn off and turn on the car error is deleted and the car works normally on 4 cylinders until the engine is warm. I need an advice
@@zlatkoschauer5744 several things can cause misfire, most common is defective ignition coil pack. But your happens only when you start the engine. Remove the spark plugs and see their colour, that will tell us a lot of things.
Maaf tuan.saya bertanya diluar konteks...b170 saya tertera tulisan transmission consult workshop. Lalu saya mwnurun kan tcu dan mendapati 2 jumper yg putus di dalam modul tcu... Setelah saya menyambungnya dan memasang ke mobil tapi belum saya isi oli cvt saya sekedar meng on kan kunci kontak dan tulisan transmission consult masih ada. Apakah berpengaruh oli cvt yg belum saya isi.atau memang tcu nya yang belum sempurna.thanks from Indonesia
Hi there sir since you said if I have questions with other cars I should ask,I have two questions (1)How do I reset service millage screen on my 2007 B class cdi auto box (2)Which transmission oil must I USE and the B class (3)My rover 400 diesel came without an intercooler should I have one fitted or should I leave it origina
My car gives "0042" "00F6" while the first one is Oxygensensor related and might be old, the later one causes my car not to start anymore. The fuel pump is not run anymore and the car cranks infite and only runs when you smash the throttle :-8
I have B160 radiator cooling fan stays on when start the car I changed temperature sensor the same no codes any suggestion
Hello, check if the AC pressure switch is disconnected.
It's at the bottom of the condenser.
Thank you much problem sorted
Nice to see In good Hands Mercedes +Star Diagnostic?!
Thanks for video
Hello, I have a 170 petrol w169, and I have a problem when starting the car when it is cold, start on 3 cylinders and after a few minutes start the engine error p007b, p0304, then turn off and turn on the car error is deleted and the car works normally on 4 cylinders until the engine is warm. I need an advice
What do the codes say?
P0304 MERCEDES-BENZ - Cylinder 4 Misfire Detected
@@zlatkoschauer5744 several things can cause misfire, most common is defective ignition coil pack. But your happens only when you start the engine. Remove the spark plugs and see their colour, that will tell us a lot of things.
I need a gearbox plug for a 2007 Mercedes Benz B200 cdi Turbo, where can I buy one
I'm sure you'll find one at the breakers.
Hi, I've just followed your fb
I have some parts of this car
And.. can you make a video obut how to open all body parts?
Especially rear part
Thanks
Maaf tuan.saya bertanya diluar konteks...b170 saya tertera tulisan transmission consult workshop.
Lalu saya mwnurun kan tcu dan mendapati 2 jumper yg putus di dalam modul tcu...
Setelah saya menyambungnya dan memasang ke mobil tapi belum saya isi oli cvt saya sekedar meng on kan kunci kontak dan tulisan transmission consult masih ada.
Apakah berpengaruh oli cvt yg belum saya isi.atau memang tcu nya yang belum sempurna.thanks from Indonesia
I'd love to help, but I'm having problem with the translation.
Hi there sir since you said if I have questions with other cars I should ask,I have two questions
(1)How do I reset service millage screen on my 2007 B class cdi auto box
(2)Which transmission oil must I USE and the B class
(3)My rover 400 diesel came without an intercooler should I have one fitted or should I leave it origina
Good job
Thank you
My car gives "0042" "00F6" while the first one is Oxygensensor related and might be old, the later one causes my car not to start anymore. The fuel pump is not run anymore and the car cranks infite and only runs when you smash the throttle :-8