ฝัง
- เผยแพร่เมื่อ 7 ก.พ. 2022
- Checking out the new Furitek Micro Komodo and comparing it to others! Brushed,brushless etc. What’s the advantages? Let’s find out!
DON’T FORGET 2fmrc will get you 10% off on Furitek products!
Furitek motor and mount combo available soon!
Furitek Micro Komodo available here
furitek.com/products/furitek-...
Furitek Micro Komodo mount available here
furitek.com/products/furitek-...
Axial Gladiator available here in Beige
bit.ly/3Gf16Qt
Axial Gladiator available here in Blue
bit.ly/3J0fQol
SOME OF MY FAV UPGRADES FOUND BELOW!
Work mat I’m using (and LOVE) found here
amzn.to/3ACRBsU
Treal aluminum high clearance links found here
amzn.to/3jZd1KO
Hot Racing high clearance links (Deadbolt) found here
www.ebay.com/itm/Hot-Racing-A...
Emax digital steering servo found here
bit.ly/3wdd7lp
Emax analog servo found here
bit.ly/3uVK6Jy
Rc4wd 1.2 tires found here
bit.ly/3qQJmFd
Hot Racing aluminum steering links found here
bit.ly/3pKyMiy
Treal brass diff cover found here
amzn.to/2UrPZBx
Treal brass steering knuckles found here
amzn.to/2TXpaVI
Treal brass extended wheel hubs found here
amzn.to/3zXLS0A
Treal overdrive gears found here
amzn.to/3xS5Doq
Treal high clearance links found here
amzn.to/3vVo61O
Treal wheels found here
amzn.to/2T3hdOw
Hot racing aluminum steering links here
bit.ly/3pKyMiy
Rc4wd Patagonia tires found here
amzn.to/3qpGizu
Don’t forget to use the discount code 2fmrc at fullsendrc.com for 15% off your order!
Don’t forget the amainhobbies affiliate links! If you need anything let me know and I’ll get ya a link! You can get to amazon through the link below and help out the channel as well. Thanks so much for the support and as always, hit me up if you have any questions or anything!
amzn.to/3x1HRX2
~-~~-~~~-~~-~
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
• Injora Lights for SCX6...
~-~~-~~~-~~-~ - บันเทิง
Awesome!! Yes, I have mine on pre order . Mr Mofo motors V2 are awesome!! Furthermore i have 3 of the Holmes Hobbies 380, had one of them on my Tioga and broke the input shaft and installed a second and one of the wires killed the motor. Mr Holmes replaced them both with no questions asked on both he replaced the motor shaft added a collet to both. Have not had an issue since. So far so good with these fellas and their products. Can't wait till I try these new micro komotos. Thx Matt once again Sir for your test and tune vids. Rock on 🤘🏻🤘🏻
Thanks for showing the torque force with your hand! Lol I’ve currently reached a plato with my ax24 die cast as its too heavy… but this should do it! Thanks again 🤘🏼
Super awesome! My 24's motors are stock and on the way out...Great discovery thanks!
The more I see of this motor the more I’m liking it. I might go ahead and order one for my deadbolt build
That's actually pretty awesome, I run one of my rigs brushed because of the better motor placement. This could be even better suited for it. Thanks for sharing.
Sweet little motor. Looking forward to ultralight builds in the future. Low and not so slow
Been waiting for this vid!
Great Information, Thank you for the great content 🤙🏽
I noticed you got the komodo to be rear facing. I just figured out how to accomplish that yesterday by turning the trans plate 180° so I don't have to mess with my electronics. The plate doesn't exactly fit the outer screws, but with a little finesse I got it to go in
I got one a year back and it is my favorite upgrade (big komodo)
I’m really enjoying your videos😍 i love the furitek micro
Thanks so much! It’s definitely a sweet little motor
Brushless works! Kinda pompous statement to make but I have tried both formats and this is my opinion. I run a MOFO RC Nano-beast 2.0, mounted in stock position (MOFO motor mount). Performance is exemplary!, Space for electronics, voluminous I assume the Furitek performance is equal at least.
Special HEYS!!! to test driver Liam! Good job man!
I saw this in one of your post in the background. 😁. One thing about more torque is that you can run a higher tooth count and still have more power than the stock motor.
Yeah I’m also gonna probably pull it from the portal truck and test it. Should have more speed on stock axles as well.
omg what a torque monster!!! fixin to order the kit and the tesla screen
very cool motor, going to have to get one for my next build, i recently finished a surpas powered mofo ugly af jeep and i love the performance it is slightly top heavy though, cant wait to get one of these tiny ones
Heck yeah! This will definitely pull some of that weight. Keep me updated on it!
Thank you for sharing, i still prefere the Mofo nanobeast 2.0 for the moment, my perfect motor would be an Inrunner dust proof that will fit in the stock position !!!!
I think it won’t be long before we see it!
Hey Matt. I really do love your content your always on top of the game. I have a quick question I bought a micro komodo and a plate. What gear (pinion) size do I need to get to fit the stock spur (scx24). And the motor mount screws they gave me are super short when you need longer ones for the thickness of the aluminum plate. Any idea where I would pick up the size/length of screw to mount the motor? Any help is greatly appreciated. Thanks.
Thanks 👍 now if it all would show up I'd be happy 😁 lol
Got the white one won't be white for long
Man , I wish there was a UK supplier for Furitek !
Thanks for posting this! Looks like a great motor. Are you able to run it on 3s using a lizard pro? Furitek’s website says lizard pro can only run with 3s using a 1400KV 2204 size motor (the komodo). Thanks
But the brushed motors are to me in my opinion cheaper and easier to install.....but iv never had a brushless set up yet....I have in 10 scale but it's not installed yet....love watching your videos man keep em coming
Yeah I agree with that. Just like my new Gladiator. With the new esc being a little smoother and silent, I don’t plan to go brushless in it just because there’s no reason to replace esc and everything. A good brushed motor will be great in it.
I'm going to get a gladiator soon I bought the mofo portals and bumper and other things for my jeep ....then I'm gonna get the gladiator and start on it....lol
I need that Atlas body and the Toyota
When you gonna review the furitek hiroyama chassis kit???
This makes going brushless really interesting. I didn't like the big clunky motors like the original komodo it maybe really good but it takes up way to much space and unnecessary weight.
Yes it definitely evens the playing field a bit
Liam can give you a car and the hit and he still would have won. Go Liam!
Have you noticed how the brushed stock motor and others have a good Bumping power "to jump a rock" but the brushless doesn't? maybe im doing something wrong not sure. I have my punch set to 10.
If we could get just a little more wheel speed the would be amazing
would have helped so see how to connect it, why does it have three wires, can you connect it to stock esc or do you need the lizard ?
I've seen videos of your putting the micro komodo o a TRX4M if I remember correctly and I just did that, on my scx24 it ran fine, put it on my TRX4M and it slow crawls, all electronics from scx24 are being used on TRX4M but when I pull the trigger to go anymore than crawl then it goggs and won't go, anything other than slow it goggs, getting hot really fast as well and the throttle is reversed. I have no throttle reverse on the remote so I didn't change it. Any ideas. Thanks
Where did you get that silver rzr style buggy chassis? I want one
I too am interested in wheel speed. I’m thinking of picking up a gladiator to actually walk and go on trails with, and it’ll need some speed to keep up with a walking pace and not burn out. That said - do you have any recommendations for pure speed? Any motor/spur/pinion/overdrive worm gear in mind?
Was wondering the same thing. Experts chime in please.
I honestly plan to probably throw an ox motor in my Gladiator. The stock esc in that thing is so smooth that I just don’t see the point in going brushless with it. I may go with the treal 23% overdrive in the front and 14% rear to gain a little more speed. You could probably also go with a 3s batt in it if that’s not enough. I haven’t tried 3s on the new esc yet but I always ran it on the old ones so I don’t see why it wouldn’t work lol.
@@2fmrc appreciate your thoughts. Have you played with a mofo RC buzzsaw motor before? Looks like it could be 90-180% faster with minimal adjustments. I have a few ox motors laying around but that buzzsaw may be what I need to launch these little cars, ha.
@@grandehombre09 I have a couple buzzsaws here but I installed one in my monster truck build and it didn’t seem to have much for some reason. Maybe I was expecting too much from it in that build I don’t know. Then I was also told not to run 3s on it so I pulled it and tossed it in the bin. I may toss one in my gladiator (gotta change that motor anyway) and see how it does under normal circumstances.
For pure speed, the PN90 with the Mofo big block motor mount and a 24t mod3 pinion is really fast. It doesn't have any low end torque, but it has plenty of wheel speed. It's a lot of fun, but I'm going to experiment with different gears until I get the torque I'm looking for. Hopefully I'll still have enough wheel speed for rock bouncing.
I like how you just say tegu all the different ways now 😂 🦎
I’m so confused 😆. My brain can’t handle it all. Now it just blurts out whatever comes to mind first lol
Matt, if you get a chance you should try the new rc4wd mickey thompson pro-x tires and then let me know what you think. In my opinion, one word. Grippy
I’ll have to order a set! Thanks for the heads up!
Is that a piece of black Kydex for the roof?
What else would I need to install the Micro Komoto? I already have a lizard pro running the mofo torque beast in my Gladiator.
Hi Matt, Would there be any reason to get the original Komodo, over the micro, in 2022?
🤘🍻🤘
Apologies if I missed it in the video, but, what ESC are you running with the Micro Komodo?
Furitek Tegu with it and Lizard pro with the mofo
How well would the furitek brushed esc work with the wpl c24 ? I'm going to get a flysky have too many controllers lol 😂
It’ll definitely be better than the stock setup. I installed a stock Scx24 esc in my wpl and it was quite a bit better. The Furitek should be even better!
Thx for the good content. Do u know if the Komodo micro motor fits on the mofo transmission and plate? Or do I need the new Komodo plate?
I appreciate that. It fits! Just tried it today. Going to be posting a vid about it soon hopefully.
@@2fmrc awesome. Just ordered the brass trans from mofo and u just spared me having to get furiteks plate. Ur videos inspired my latest build and appreciate ur content…
Can you put that micro Komodo in the new gladiator please that’s what I want to do..
My only concern is that it probably doesn’t stay as cool, temperature wise as the full size Komodo. I’m running it is my deadbolt build and it’s never even warm.
Yeah that big motor will definitely stay much cooler. I haven’t had any heat issues with my mofo nano but time will tell with some more running and some warm outdoor running later when it’s not 17 degrees out lol
Could you compare the height of how it’s mounted ?
Vs the nano 2.0?
I believe the nano is 16g vs 17.5 komodo jr.
Looking for all the LCG 😂
Yeah I’m planning to pull it from this truck and do a more detailed comparison between those 2 soon. I kinda already had it installed for testing during the prerelease phase and didn’t wanna pull it back out just yet. I know these two are the options for brushless at this point. I think the large outrunners are a thing of the past from now on honestly. Hopefully I can get that pulled and some footage shot in the next day or so. Keep an eye out! I appreciate the suggestion also 🤘
have you messed with the godzilla motor? whats the difference in it and the kamoto?
Hey so all you need is the micro motor and the motor mount for it & stock transmission for this to work and of course a furitek for brushless?
Yep! Mounts straight up!
Do you think the micro komodo can handle a rig that weighs 845 grams? I'm wondering if it can handle my die cast build
Have you seen the Godzilla motor from Furitek? I have one coming but haven’t seen anyone posting about it. It’s says it’s for 1/24 monster trucks, so I don’t know if it will fit in the SCX24 or not. Any opinion or info would be appreciated. Thanks
I actually have one sitting waiting for me to find the time to build another monster truck. Did you get the transmission and everything with it?
So for a no knowledge guy, to mount this in a new, completely stock Deadbolt, you would need the micro Komodo, a Lizard ESC and a/the mounting plate? That's it? Thanks!! Learning a lot from you and EXPIOWA!
Yep that’s it! As long as you have the v1 esc/receiver you can still use it also. If you have the v2 (blue) esc you’ll need something like the flysky
amzn.to/3EW0ssc
@@2fmrc Thanks! So the second gen. (blue) stock esc's don't plug and play with the Lizard? I haven't got my truck yet, so not familiar with all the nomenclature. :D
@@wingnutbert9685 yeah the v2 esc/receiver don’t have a ch2 input port on them. That’s where on the v1 esc/receiver you can plug the lizard in and bypass the esc and just use the stock remote. Since the v2 esc/receiver don’t have the ch2 input you can’t plug anything into it and bypass the stock esc.
@@2fmrc DOH! That sounds like a cockup on Axials part. Thanks for the warning! So the Flysky plugs into the V2 and the Lizard into that and you can then use the stock remote? (Sorry for the annoying questions) I'm out in Metchosin. Are there places guys go to crawl that I could go watch in town?
@@2fmrc so you would need an aftermarket receiver also?
" Since the v2 esc/receiver don’t have the ch2 input you can’t plug anything into it and bypass the stock esc."
My LHS sold me the Furitek Chameleon brushed motor. Have you had any experience with it?
i do, what do you want to know?
its definitely a noticeable improvement over stock. you gain as much torque as you lose top speed. crawling is more controlled but still leaves a bit to be desired. for $20 its definitely worth it but i doubt you will be happy enough with it to stick with it for the long run. after all, i bought one and im on youtube looking at brushless options.
Is there a brushless motor that would fit the wpl c24.with the two speed transmission
I honestly haven’t touched the motor or transmission on mine to know. I may look into that. I’m sure about anything can be made to work with some mods.
Bro. I need one!! Haha what mount are you using with it?
They have their own mount for them. It will be available as a combo soon but for now only separately as preorders.
@@2fmrc, will the Micro Komodo fit the same mounts as the Nano Beast?
RIP to the old Komodo motor and Scythe chassis!
Anyone here run the proline cliffhanger 1/24? Matt what do think? Also do the full send treal b type weights work with the treal brass hub weights?
I’ll have to check the weights for ya and I’ve had a cliffhanger body backordered from horizon for 2-3 months now and still haven’t heard anything from them. I ordered another one from amain and it’s actually coming this wk! Can’t wait! I’ll be showing it off soon as I can get some paint on it and mount it up!!! I love the 1/10 cliffhanger body so I’m hoping this will be the same.
I think I might get one and do a half green half black paint scheme.
What rims are on your gladiator?
Those are the treal b type in bronze. Really like the look of them!
amzn.to/3BcKbx5
Will the Micro-modo fit Nano Beast mounts?
I haven’t tried it just yet but looking at them I am 90% sure it would. The only thing that could possibly not work is if the motor shaft is longer or something odd that makes the pinion not line up well. The bolt holes on the motors look the same.
@@2fmrc Awesome! Thank you Matt!
@@JPWirt anytime! I’m planning to pull this motor & mount out of this truck now and compare straight up with the nano beast 2.0 soon so stay tuned for that. I’ll definitely try cross mounting them then 👍
@@2fmrc, I'll be looking forward to that one for sure!
Would that motor fit in a wpl c24 ?
Not without some sort of new motor mount I don’t believe. I haven’t pulled the motor mount on a c24 yet but I’d say it would be difficult to make work.
is that .3 or .5 pinion it comes with?
Fits the stock spur! So .3
Any chance you have a Furitek discount code?
2fmrc will get you 10% off!
That thing crawls so slow that you need to knock off the cobwebs that are forming now and then.
Haha! Good one!
RIP brushed motors...
I think so!
How slow it goes is cute and all the rage. However, if you actually crawl, it doesn't mean shit.
This comment is cute 😆 If you actually crawl hard stuff it does imo. That super slow crawl is great when barely hanging on to a lip of a cliff and need to make a small adjustment. How can that not be helpful? It’s not necessary because you can be almost as smooth with a brushed motor but it’s nice to have. With the torque & wheel speed now being almost on par with the brushed motors I’m not sure what’s to hate? It’s all based on what ya like so whatever floats your boat!
"if you actually crawl". you have no clue what crawling is
@@dirtrider88 I crawl every week and compete every other week. I definitely have a clue. It's important to have control but nobody crawls that slow because every run has a time limit!