$10,000 rc car
ฝัง
- เผยแพร่เมื่อ 3 ธ.ค. 2022
- 🎓Kev's eBay Secrets - 11 steps to being your own boss kevtalbot.clickfunnels.com/sq...
Get Car & Upgrades here:
www.primalrc.com/
www.taylorrc.co.uk/
Get Your Merch Here teespring.com/stores/kevs-merch
🧡My instagram / talbotkev
💙My Facebook page / kevintalbotvideos
💡Check out my Business Channel: / @kevtalbot5356
🎥My LIVE Stream Channel - / @kevintalbotrc
🚗Kev's RC Basher School - kevin-talbot.teachable.com/p/...
This is my fun channel, you'll find everything hobby related, rc cars, monster trucks, supercars, destruction and a bit of business stuff :) Although a lot of my videos are RC Car videos you will also see other stuff like business, Amazon FBA, eBay, Monster truck, Cars, insurance and many other topics.
#Kevintalbot #rccars #rc
Kev's eBay Secrets - 11 steps to being your own boss kevtalbot.clickfunnels.com/squeeze-page31158442
I need to try this👌
Another good video kev👍🏻
Can you like this comment? It would mean a lot ,hello from USA
Thank you Kevin!
The wheels were spinning too fast when it landed with nearly no forward momentum, which sent massive torque through the drivetrain as they're forced to stop instantly.
The way you take our hobby seriously, but not too seriously is why this is my favorite channel!
me to
When you don't have to pay for anything out of pocket it makes it easier to not be so serious
5 Mill subs send the Huracan to the moon
5 mill this year ill do it
Hhahahaha
@@KevinTalbotTV total carnage👌
CARNAGE
Maybe 100mil
I loved when you made the comment "your not supposed to hit bearings with a hammer!". And your answer to it was perfect, "don't worry, it's just a toy". Thank you for putting everything into proper perspective. You are great to watch, thank you.
Yeah, these “toys” often make grown men cry. 😭😂
It's not like hitting the outer race is likely to do a lot of damage in this case, but this is also pretty much an ideal situation to put the bearings in a freezer for a couple of hours and then use a vise and some sockets to push it in (if it doesn't just drop in after the freezing).
Quite satisfying watching you rebuild the transmission
Those landings where so clean. Shock setup is brilliant
To balance it I'd get softer rate springs but distribute the load over each of the two shocks.
almost like he owns and drives a real monster truck
except the one in the beginning when he pulled it out of the van and it landed on the front left wheel in a way that looked like something was going to break.....solid build.
Hello Kevin, I am Roberto, yuor italian fan. I'm 46 and my family and I love so much to watch your videos. I really want to change my Life as much as you did and you are doing with eBay. I'm so tired to do my job as I work in a supermarket and everytime I come home I think how to do to change my situation. You are what I want to be for me and my family.
go for it dude!!
Please, show me the direction, do I have to do your eBay course? Thank you so much Kevin!!!
you dont have to do my course but it will help you
Using a gel ear plug to remove a blind bearing is utter genius. 👏👏👏
Agreed.
Never buying a bearing puller again, Kevins a genius for that one
I always use bread for it.really old trick
It's called hydraulic pressure.
Its Not Genius its common
mind blown with that bearing removing trick, awesome
Always impressed with Kevin’s mechanic skills. 🔧
I see you put double sealed bearings in the gearbox, try leaving the inner seals off so grease/oil can get in and keep them lubed.
Also it might be an idea to upgrade the high load bearings from deep groove to roller bearings so they can handle the power.
Always love Kev's videos,his fearless tweaks,upgrades and rebuilds are always interesting.
I like your video's of mahem and destruction. But I like the ones where you fix stuff even more. I am already proud of myself for just building a simple Tamiya. Your builds are awesome.
That old pilot bearing trick works every time.
Love your videos! What I think would be a cool video idea is making a body shell for your $10,000 rc car that looks like your monster truck that you have in real life
That raminators an absolute Beast it's got to be quite a spectacle to see it launch like that in real life I remember the first time I seen a x maxx launching up into the air and it was just astonishing to see this would just blow my mind I'm sure
Seeing the ram on the workbench really put into prospective the size of it wow its massive..and looks like kevs got the suspension dialled in now nice 👍
Wow!!! I'm shocked on how smooth that beast lands now, with that upgrade! Thanks for another Great video 🙂
I can appreciate the quality of this build!
Kevin wow, I have not seen anyone else do that ( pressurizing the bearing )since I had to do that in 1990. I was rebuilding my Chevy S-10 engine. That is for sure a deep cut trick! Love it…
Kev has become quite the RC expert. Phenomenal video Kev, nice landings! That thing has some plush suspension now!
Those shocks are amazing job well done Kevin
finally, a longer video!
We need to see more of Max's stuff. His Xmaxx did not disappoint with those massive jumps
Yeah I’d agree , start a channel so he can help pay for all these cars he’s launches into oblivion fun to watch
Nobody does it like you!!! Love everything you do!
thanks bro appreciate it
Awesome tech tip for getting that bearing out Kev!
That was a lot of fun to watch. I just love looking at all those machined parts. I think someone needs to tell the good folk at Raminator, and possibly any aftermarket parts makers, to put small radiuses everywhere there is a sharp corner on their shafts and driveline components. Maybe dial it back a notch on hardening processes too.
Maybe then things won't snap as much. It's quite the engineering challenge to make something that big and heavy be durable as well.
Awesome kev, the suspension is looking really good now. I really liked the tips for pushing that bearing out.
Old school method was to use bread - ahh technology eh. =)
3:35 Kev taking advantage of physics!
Kev, it really is impressive how much knowledge you've gained over the years. Love watching your content, I don't quite have the budget you do ;) but even as an older gent I've learned to appreciate the hobby. One of the added benefits, my dogs absolutely love chasing my car around the yard. It really gets them needed exercise.
Do what I do, go follow your car around too and YOU can get needed exercise!
Kevin Talbot is brilliant his videos are always fun.
Cool jump!! Great landing! Glad it was not badly damaged.
I wish I knew that trick for the bearing before! Great video :D
3:50 glad to see that worked. I read that bread works too. I had to do the same for a router I have but there was an edge underneath and I was able to get a tiny puller in that I have.
Bread works great- used it to get a pilot bearing out of the end of a crankshaft. The other readily available substance is bar soap.
love your content kev thanks for all the rc content
I loved that you showcased your dewalts, grabbed one tried it didn’t work threw it in the garbage then went for a 12volt Milwaukee. Best thing ever mate. Milwaukee all the way, out beats any 18 or 20 volt dewalt makita or ridgid!
That silicone bearing removal tip was awesome. Not sure if I will ever use it but, i would of never thought it could be done like that.
bread does same
You are the best Kevin !
Kev.
You should engineer a replica of your real monster truck, and license it to an RC company so we can drive it!
Hey kev! I use the trick you did with the silicone ear plugs a lot, but I typically use bread, and wet it. It’s messy but it works every time!
Max needs a TH-cam I’m definitely subscribing when he starts
This truck is awesome Kevin your a mechanical genius
Awesome as hell Talbot !
Kev!!! That stuck bearing removal fix with the ear plug is brilliant! Thanks dude! Ive watched every one of your videos.
As a mechanic we used grease for blind bearing removal, same gdog different leg action.
The Raminator sure is one sweet truck, love it 😀
This is the content we all know and love !
Good on ya Kev, never fails to make me smile.
I was deeply impressed when you pulled out the bearing with the silicone earplug method. chapeau.
Soooo good.. You could tell how loud it was by how quiet kev was hahaha
That dual shock set up was amazing.
Really like all this tinkering! It's a big part of the hobby after all haha
This size of scale is so awesome to work in, you get to use power tools, and you get more room to work in and don't need a massive workspace
Think I'd pop those bearing seals for good and let the oil in the transmission lubricate them continuously. Love the trick to get the bearing out of the blind hole, never seen that before. I'd have been there forever using heat/reverse pliers.
Biggest Raminator Air FOR SURE!! 🚀
I Think Thunder RC went biggest before this one, now this is the highest for sure Kev
Kudos to you for that Suspension setup... You nailed it with drilling out the pistons a bit and only one set of springs😍😍😎👍
See ya round brother
thanks bro! yeah she lands good now!
Good one Kev, neat bearing trick👍🏻
3:25 great teacher Kev! always blessing us!
I've never liked how bouncy those trucks are which is why Ive never wanted one, but that shock upgrade made a huge difference, looks decent when landing. The other thing is, you better have some money cause that damn thing is expensive! Great job on the shock upgrade that's the 1st time I've seem anyone do that!
Most epic rc jump EVER!!!! Scared me with those slow motion landings thinking something was wrong, just waiting for the gta death music 🤣
Brilliant video Kevin Talbot like the great rc car it's so so big and powerful enough
You did a great job Kevin.
That landed perfectly with that shock upgrade.
That is the coolest RC car I've ever seen
That thing lands perfectly every time, Awsome.
The balance of that thing is unreal jumps perfect
That thing landed so nice for the size of it. If it were me it would have landed upside down and broke everything. Great video
2nd shock set really works well. They way that Ram handles now looks more like a Monster Jam real truck.
Great filming shots and angles!
Hey Kevin your the man!! Keep up the great work mate!!
Very satisfying video for those who haven't gotten into RC vehicles yet, or those who want to come out of retirement.
Would love to see a channel from max keep persuading him kev!
When an RC car is worth more than your real car
I love waking up in the morning to a new video kev!!! Especially with the ramenator!!!
I died at the DeWalt diss 💀
Edit: if you’ve got nothing else on hand, bread works to pop out bearings as well 💯
Kev, check out Redline oils suspension fluids. They list CST ratings below 100. I think they're for racecar/dirt bike shocks & forks.
Love from Detroit, you are the man KEV!
Very nice my dude keep up the good work!
Personally, I feel kind of wary about the way the transmission on that only uses grease. I probably would have sealed it with gasket maker and filled it with gear oil. The grease does seem to hold up fine though.
Bro that barring removal trick was awesome!!
Nice tip on how to get the bearing out using the ear plug Kevin. I didn't know that one. :)
“Kev you’re not supposed to hit bearings!”
Don’t worry, it’s just a $10,000 toy 😎
Yess!! This is what we've been waiting for 😜 kev send it to the 🌲😜
That thing legit looks and acts like a real monster truck in the way the suspension moves and body rolls around. What a wicked little truck!
Always love your videos! Been a fan of the channel for a long time. Keep it up.
You’re an inspiration to the community. Love your videos!
Kev, You might find you need Nitrile or Viton O rings if you’re using mineral oil. I’m sure it degrades normal rubber pretty quick.
When changing o-rings in the shocks, don't forget to apply o-ring grease to them. It makes the movement of the shaft butter smooth.
Excellent call with the double shocks.
Have you thought about putting a moped or a small motorcycle muffler on the raminator? Would be an interesting upgrade video😁
I feel like landing it under power is what caused the break at the end. Too much torque and a surge of resistance caused something to let go.
I’ve been sick all summer and recovering since. I haven’t posted videos on my channel but it’s good to see your still active on your channel. Good stuff kev.
have'nt had a truck since my Tmaxx 2.5 and 3.3. Started back in the day of the RC10GT! Man have they come a long way! now I want a new one! Great video bud! Also I think what killed it was him revving it before landing... MASSIVE stress on tranny.
After watching you for 3 years now, and starting my own little channel. The biggest thing you've taught me is that, consistency is key! And you are by far the most consistent youtuber on the planet! Thanks for the years of inspiration and entertainment💨💨🏎🚘
As consistent as he may be, no way is he the most consistent TH-camr on the planet as you put it, there are channels that upload multiple times a day every day every single day, so they would be more consistent, just thot I'd let ya know that making certainty claims such as that isn't wise unless your certain it's true........
@@diychad7268 You sound like a hater man! I don't subscribe to "every" TH-cam channel. So "for me" he's the most consistent. I'm just giving props the way I see it, others may see it differently. But I said what I said💯 #MostConsistentRcChannel
@@diychad7268 Posting ten tiktoks a day isn't the same as posting several videos a week with each video taking multiple hours if not days or weeks or months.
That ladies face after hearing the raminator startup means you’ve done it right! Well done kev
No
Simply amazing Good Job Well Done!
It's so beautiful Kevin!! But in the words of Huey Lewis, "It's just too darn loud".
That lil extra goose of the throttle before they touch the ground always breaks sumpin'. 😂👍
Looks good Kev keep it up 👍
IMAGINE THE FAMILIES $10,000 COULD BUY FOID FOR‼️
The way the raminator drives is just insane, nothing like it!
That RAMMER of yours KEV....
IS 'DA-B💣MB!'👍
🤘🇦🇺🤘
Man what a shame it was doing so well absolutely epic