@@starcitizen890j5 I did that recently with the sim tool that came in my Walmart Hypertough electronics kit on my girlfriend's old LG phone, and it helped the Micro USB port, well that, and a new $1 cable from $1 Tree lol.
I sell phones for a living and I can't tell you how often customers come in with a phone they say won't charge anymore and it's just because there's gunk in the charge port. I use small rubber coated paper clips and canned air to clean them out.
Good idea, I might try that next time, I usually use the little sim card tool that came in my in my $10 Walmart Hypertouch electronics repair kit, and I feel it's almost as good as the more expensive Ifixit kits.
Me, too. First time on my iPhone Lightning port, I used a wooden toothpick and cleaned out a crap ton of lint. Since then I've used the plastic tootpick end of the floss pick. They're thinner and don't have bits of wood that could come off.
Good idea. It's better than using a toothpick which can break little bits of wood into the gaps. I like the idea of using a plastic sheet (like you might find on wrappers for small electronic items like usb drives and headphones), cut into a little digging tool (using scissors). Only need something like a half inch by an inch with a sharpened end to dig out the lint. Especially useful for the microusb kind.
Paul, I cannot tell you how ecstatic I am from this video. I’ve had my One plus X for 5 years now and was about to call it quits until now. This worked perfectly and now I’m planing on keeping my phone for as long as it’ll go! Thank 1 million times over!
Something else to add to your toolkit regarding this is that its common for people when pulling out their cord they do not pull it straight out and instead pull at off angles. This causes the thin metal shroud casing that in fact is a guide for the charging adapter. This gets stretched over time and bent out of shape and causes the adapter to wiggle and can and often does allow for a lose fit that does not properly connect. You can take an exacto knife and gently pry around the outer edges of this casing to bring it back down to where it will grab the connector and ensure a clamping fit. In a lot of the repairs I have done this is the major problem that cause the issues. Last but not least tell your customers to stop ripping out the cord and pull straight out...;)
Hi mate. Thanks for that. I just got a load of crap out of my USB C charging port. An unbelievable amount! I used scissors to cut a thin slice of credit card type plastic & it worked great. Even adaptable by cutting different hooks & angles. Thanks very much!
Finally a resource explaining what to do for loose ports that are nicea clean. My 3 year old phone is just really loose and the exacto knife idea just might work!
this was it for me, anyone with a decade of using phones knows that you need to clean the port. mine was loose as you described, I opened my phone to expose the charging pcb and with some pliers bended the all metal usb c housing back in shape
thanks for the tip man i cleaned a shit ton of junk from the port and it just keep getting of (the port) and tried bending the metal a bit and it worked hope you got blessed year
Well then ill have to try that. My lg g6 just stopped charging completely after weeks where it only charged when pressure was applied on the cable in a specific way.
PRO TIP : if even after doing some lint cleaning your usb cable doesn't go all the way inside the usb port (it should do some sort of click when you plug it in), then it means you have a layer of heavily compressed lint somewhere in the usb port, which can be at the bottom and/or in the corners. If so, don't hesitate to scrape heavily (just make sure you use wood or plastic, not metal, and that your tool is pointy enough and thin enough so that it doesn't bend or touch the middle part of the port) until you can see some lint coming out. Took me a while with my Google Pixel 3A, i was about to give up and replace the usb port, and decided to scrape harder with my thin wooden toothpick, and finally saw some lint come out, and after 10 minutes of scraping and removing lint, i could finally plug my cable properly (i could hear the click) and charging was fine again.
A thousand times this. I cleaned it really well with alcohol wet wipes and a thumb tac but it was still not working. Had a replacement part ordered and everything. Reading your comment and others below (the plastic toothpicks that are used to floss was a great recommendation for a tool) i went to my bathroom and REALLY scraped down in there and bits of dirt and lint that i missed came out. Tiny ones but it 100% fixed my charging issue on my zenfone 9. For about a month there I thought my charging cable was crapping out or something..
@@mexcellent227 Glad to hear. Had to go with the same thing a couple of months ago again (happens because my phone is in my pant pocket upside down and i work in outdoor/dirty environments so my USB port gets dirty real quick). Was a pain in the ass but now my charger is working perfectly again.
Those flossers with the picks on them (I use the Plackers) work super well for this because the pick is thin, sturdy plastic but also bendable enough to get the groove corners without even touching the center connector. Saved me from throwing away a nice braided USB-C charging cable thinking it was broken when my Pixel 3 port was just packed with lint and works like new again.
It's funny that you posted this video. I actually have been having the issue of my charger not staying in. I would have to lay the phone and not move it AT ALL or the charger would fall out. So I took a really thin toothpick and got SO MUCH dust out, and it works better than brand new now! Awesome of you for posting this because I'm sure there are people that didn't know about this. I know I didn't for almost a year!
I've done this often over the past few years, just to keep my phone clean. I started with using toothpicks but have found that it is easier and more efficient to use sewing needles and those pipe cleaners you find in the craft section (it's as if they're made specifically for cleaning things 😂)
damn thanks for the comment toothpicks didnt work for me because the grime was just to hard but with the sewing needle i got most out and its just so satisfying that it holds now :D
Wow, thank you! My USB-C port had been giving me contact problems for a while, and even though it might seem like a no-brainer to use a toothpick to clean it out, I had just never imagined that a simple accumulation of gunk could be the real reason. When I took the toothpick to the port, I was horrified by how much crap came out of it. I also gave the same treatment to the audio jack that had been failing, too, as well as the microphone hole and the speaker grille, and now I have a phone that's as good as new!
I've had to do this multiple times, especially for my father and uncle when they couldn't plug their phone into their computer to transfer files. I preferred using a sewing needle or a long thumbtack as I had to punch through a hard-packed layer of solid lint. You'd start pulling chunks out and think you got it, but no, there was a whole 'nother layer packed down solid.
I bought little silicone port covers for my phone. Before that, I was using magnetic cables, so there was always something plugged in, but those started charging slowly at random so I gave up on them.
Thank you! You just saved me $500+, as I was about to buy a replacement to my Google Pixel 2, which is still working flawlessly but was having issues charging. Since charging was the only issue, it is as new again.
I fixed my USB C port on my iPad. It turns out, it did not have lint in it. So then I got a green Gum brand interdental brush (tight fit) and some alcohol. I poured alcohol on the plastic cover for the Interdental brush and covered the tip with my thumb to keep the alcohol from draining out. Then, I dipped the brush in the alcohol and used the wet brush to clean the port. The brush was small enough to fit in and it has a little joint on it to help it move freely. And, it pulled out a lot of dirt or oxidized metal. And, now it charges. Who knew?! My iPhone has a lightning port. I did scrape out a little lint. And, I found that the DenTek brand wide Interdental brush (blue) dipped in alcohol worked miracles. I will say that this video definitely inspired me. I was so stressed that my devices would never charge again. And, I am surprised at how close I came to giving away a perfectly good iPad for a trade-in when it works just fine. So thanks!
I've not seen a wallet phone case for my Moto G7 that has that, but I have found some generic USB C port covers for $1 with free shipping on eBay. www.ebay.com/itm/10pcs-Rubber-usb-type-c-dust-plug-charger-port-anti-dust-cover-D-/383046330408?_trksid=p2385738.m4383.l4275.c10&var=651659052282 the only trouble is not looking them when they are not in the port lol.
TaintedGQ Forgot what Phone u uses, why nerdy people never understand what they do, why they keep crying here? USB????? A or C, all the same..Just a plug!
Now I want to find a rubber plug of some sort for it. My old LG flip phone had rubber plugs for every port. I managed to lose the plug for the charging port eventually. USB-C is so ubiquitous now that someone must sell what I want. Hmm . . . Edit: Found dust covers for USB-C ports and headphone jacks: www.amazon.com/innoGadgets-Smartphone-MacBook-Protection-Headphone/dp/B07KQDDCX2
Thanks thanks thanks... With my Pixel 4, I found the wooden toothpick good for getting the crud moving, but a narrow interdental brush works great for lifting it all out. The brush bends so goes into all the corners. Also needed a bright light straight down into the socket. Be gentle but persistent: there will still be lots down there even when you think it's clean. Very satisfying when cable fits 100% again and stays in!
There's a new cord option 'as shown on tv' which is a magnetic dongle. The dongle plugs in with a smooth magnetic cylindrical end to it where a magnetic USB charge cable connects to it.
Just cleaned my S21 today and I had no idea how much dust and debris got in there from my pockets. Needless to say you saved me from getting a usb c repair!
I have to admit that initially I thought my charge port was broken and needed replacement. But after watching this video I felt like crying because all that was wrong was my charge port was dirty. I can't say enough about how much I appreciate the video. THANK YOU!!!!!!!!
Such a life saver. I've been struggling with this very issue, and I thought I was going to need to buy a new charging port for my phone. Thank you Thank you Thank you. Even 4 years later you're still saving lifes.
Holy cow this was insanely helpful on a year and some change old note9 never really took the time to realize how dirty my pockets are... even though I use wireless most of the time this is very useful for those times that I either use wired for DeX or when i do have to wired charge.
My note 9 aux jack stopped working but a few months ago I found an old forum post about this. Used a toothpick and it pulled out a giant chunk of lint out
I can't believe this worked! I never leave a comment but this deserved one. The intro holding the cell phone by the cord got my attention. I did take the advice of another viewer and used a plastic dental pick to clean out the narrower side after realizing that the toothpick was not doing the entire job. I was considering taking the phone apart but you saved me a ton of aggravation and maybe the cost of a new cell phone had I destroyed it. Thanks a million!
*frantically googling how to fix a charging port "I'll tell you how to fix it" *phew "But first an anecdote" *glancing nervously at 11% battery Worked, though.
I been putting up with my jack not letting me connecting for charging for over 3 years. Finally decided to get it fixed and checked on line to see if I could replace it myself. Cam across Paul's Hardware video and checked my port closer......sure enough full of lint. Can't believe I didn't catch this one sooner. Saved me over $100 dollars to take it into cell phone repair and have the port fixed/replaced. Thanks great video....never would have thought it was just packed full of white lint from clothing. Thank you for your video
Huge thanks, had a slack connection when plugging into the port for some time. Cleaned out, with extreme care, took some time to totally clear, compacted dirt needed coaxing out, now clicks into the port, well and truly secure.
I work at Apple and the way we have to clean it as technicians, they give us ‘cleaning putty’ which is just a fancy name for blue tac which does a very good job for speakers, AirPods, etc but for the port, I’d recommend to use tweezers if available or a high pressure air compressor to remove the dirt and dust
Woooowowowow! I cleaned mine out with a needle and was impressed by the amount of fuzz that came out, and the plug still didn't fit well... so I tried a second time and the same amount came out AGAIN! I've been charging my phone on the wireless charger only for almost a year now. Thank you for posting this video!!!!!
Same except when someone came over to your house stayed a while to say watch a football game, and said can I get a charge I forgot to charge last night, and they would have some connector that only that brand, or specific model of phone used.
With a toothpick it felt like I was putting too much pressure against the middle connector to reach the very bottom, I used my SIM eject tool and it worked great! I got a bunch out and I still couldn't hold it upside down with a cable but then I got a flashlight and could still see a bit on the very end. Once I got that worked out, I can hold with a cable and swing it around a bit without it falling! Thanks for the video!
Still using my Pixel 3 until I just have to upgrade, but lately I have had all kinds of issues charging it or plugging it in to my truck for Android Auto (I would drive over the smallest of bumps and it would disconnect). So then I searched on how to fix this, found your video, got the toothpicks and a knife out...and now it works! Thank you!
Sim eject tool or paperclip are my go to followed by dry toothbrush and compressed air. make sure phone is powered down before to avoid any shorts. works a treat.
THE solution!! I was ready to take it to a repair service. I almost NEVER charge with a cable. Instead use a wireless charging pad. But, my phone is always in my pocket gathering lint and dirt. It was stuffed with it. Thank you!!
thanks for this so much, cleaned out my port on my Galaxy Note 8 (I've had it since launch) and it now charges WAY faster and the charger doesn't just fall out randomly anymore. Absolutely night and day difference. Never would of though of doing this.
Also, the plastic toothpicks with floss on one end helps. The plastic pick part is thinner than a wood toothpick. Literally did this with my S8 three days ago. Night and day plug grip. Like to move this to the top and help others!
I did this with my Pixel3 XL the other week. I use wireless charging, but noticed when I tried to plug in the stadia controller I couldn't get a connection. A quick swab/scrape with some toothpicks I cracked in half cleared out a ton of pocket lint (and who knows what else). Although untimely, the video was still great, because I have also now changed my phone background to a Calvin and Hobbes cartoon on a forest photo background. Thanks!
Much appreciated. I typically carry my phone in my pants (front) pocket and happened to have it there when I weedeated yesterday afternoon; lots of sand in my hair, shoes and down my neck. (I won't be carrying it while doing that again.) Later, I found that sand would not let me attach the charger cord. I took a piece of sandpaper and reduced a rounded toothpick to opposite flat sides on each end, like a screwdriver, and cleaned around the port, holding it over the white sink in the bathroom. I wanted to be sure to see what might be there. I was surprised what came out. One grain of sand dinged off the mirror. I also used an old dry toothbrush and got even more; lent, etc. Now the charging cord fits like a glove. My thanks for your video.
I recently just did this. I used a very small plastic zip tie. Worked great. Then I went and ordered some type C dust plugs. I use wireless charging mainly but sometimes need to fast charge.
4 ปีที่แล้ว
I was just recently thinking why phone charging port isn't working that well. This came really handy! Thanks!
I have done this by cutting a piece of a bubble pack ( the plastic part of an AA or AAA battery package works well ) into a small pointed tool. It helps each time too
also try using a toothbrush you can be a little more aggressive with it and at the same time more gentle - I made a video on this a while ago and it has helped quite a lot of people.
Was having this same issue a few weeks ago. I used my sim removal tool. It's thin enough to get to the bottom without touching the center post. The amount of dust and lint that I pulled out was shocking
I did this with my grand-daughter's phone several weeks ago. It was no longer charging at all and her dad was preparing to buy her a new phone! I used a can of electrical spray cleaner and a toothpick to clean out the gunk that was in all of her ports and now her phone works perfectly! I wonder how many people have bought new phones after thinking their phone had died?
Been wireless charging my LG G6 for...well, since i got it around 2 and a half years back. I had always figured that i just had a bum jack until i stumbled across this. Thank you! Such a simple trick! I'll definitely pass this on if i find anyone else experiencing this!
I cleaned my type C port with a loose stanley knife blade! It's thin enough to fit in the port and stong enough to get all the gunk loose! Definitely worth a try!
Great demo. I just fixed my charging problems. Instead of wood toothpick. I had plastic flat pick/floss and can of air. For future prevention. I found silicone dust covers on Amazon.
Wow I really hadnt thought of this, but I totally needed it! Took 15min of picking with thin plastic tools and some compressed air to clean all the crunk out, but it actually latches to the charging cable now.
My USB-C port on my Huawei Mate 20 Pro barely allows me to keep a cord plugged in. Certainly can NOT hang my phone upside down like in your video. The only way I can charge is to plig my cable in and shift it slightly to the side and not move it. Sometimes 40W super fast charging kicks in but mostly only charges in standard mode. I SERIOUSLY doubted your fix would do anything as I figured the USB port was simply worn down. After spending time with a shaved down toothpick scraping and picking away at the inside of the connector port, I was actually amazed at how much hardened chunks of dust was coming out. So, I tried reconnecting my charger, but no luck. It still had the same issue. So, I sprayed a little electrical contact cleaner on the toothpick and let some drop in the port then started scraping and gently maneuvering the toothpick around. STILL more dust and crap came out. I realized I was near the end of all that crud when I saw the metal bottom of the port showing! I could never see this before. Sprayed a little bit more contact cleaner inside and finished up the cleaning and blew out the port with some canned air. Then I tried connecting my charger and I was blown away! It had a super tight connection with instant 40W charging! Plus, I can do the upside down cable test! THANK YOU SO MUCH FOR THIS FIX!!!! 🍻
I do this few times a year with my phone (my previous Oneplus 2 and current Pocophone), but I do it with a safety-pin. A toothpick couldn't get everything out. The sharp point of the needle helps me grab the dirt. Because the shaft is thinner it works also better with micro USB. It helps a lot! PS: And my wifes phone didn't need it too. Is it because of the purse!?
Say what you will about Lighting, but that port is designed to never lose grip and have extremely consistent grip because of the indentations on the plug and the spring loaded grips inside the port. Lots of USB-C ports have very inconsistent grips even if the port is completely clear of dust/debris and tend to loosen over time.
Called Samsung and they said it would cost a bundle to fix my S8. They also never mentioned that it was probably lint. Followed your advice (tweezers thinner than toothpick because tp was a little too thick) and it's fixed. Thank you!!
Note rather than dust, some phones develop a connection issue, I recently found that some XZ premium owners had issues charging due to the connector going from the type C port gets damaged/weakened over time.
Thankyou so much for this. I'd Tried a toothpick before but didn't think to shave it thinner. I've been told not t use metal as its electricity and could seriously damage the phone. Thx again!
Thanks Paul, I tried to clean my usb C socket a while back but couldn't think of a good non-conductive tool, being a tech I was not thinking of household items. The toothpick work perfectly, and enough crud came out to refill the socket to the top.
I did this today on my S22 and I pulled so much gunk out of it. It had problems disconnecting from chargers and a USB-C microphone (causing big issues and lost time on projects). Now the mic visually goes in all the way and has that secure "snap" feeling again. Awesome. And I just found my old MicroUSB Samsung that stopped charging and cleaned it out too and what do you know? It's charging now. It needs the replaceable battery swapped but I'll pass it down to a nephew and keep it out of a landfill.
Another technique you can add to your (cleaning tiny places) is use a blu tack and press it down in the tight and hard to reach places. Speaker and microphone grills are the best to clean with this method. Hope this helps anyone
I think the plastic tooth toothpick with attached flosser work better and are less risky. Especially the ones that have a slight barb style end. You can shave the barbs off the flat side and it then makes a great tool for this.
I have also used the dental floss picks, too. (The plastic ones that are disposable) and an old electric toothbrush to help loosen up gunk around speaker ports.
I know this is an older video that you probably do not follow the comments on anymore but I just discovered it in my time of need. Thank you SO MUCH for this video! It was such a help!
Hey Paul I just did this 2 Months ago to 2 S9+ phones my Ranch guys use and I used a Flat Dental pick they are made out of flat plastic also use canned air BUT VERY Gently if doing the speaker. Both phones now fast charge like new!! R.I.P. KOBE & GIANNA BRYANT!!! Cow}:-o)
A good preventive measure is using a magnetic USB cable - having a small USB nob almost prevents any dust or other kind of just from going into the port, and u have the added benefit of having one cable that can work for multiple devices
they also have those magnetic charging cords that leave one end in the charge port on your phone. not only does it save the durability of your phones charging port but it also blocks out dust and stuff
If you're having this issue my advice is don't give up, in fact try harder. I was so convinced my charging port was just broken from use overtime & had already gotten a new phone, but really wanted to keep the old one as a backup because it still works incredibly well despite it's age (OP7 Pro). After watching this vid I thought "ok screw it" tried with a plastic toothpick & wood, didn't do any good, nothing came out & under a flashlight didn't even appear like lint was my issue. As a last resort I grabbed a metal pin from a sewing kit, at first nothing but then I really dug in, and holy crap the amount of compressed lint that came out had my jaw dropped. just kept going & into the edges on both inner sides of the charging port around the stub. Still took a few back-and-forths plugging it in & scraping more but it's now sitting here fast-charging for the first time in 4-5 months. So yeah, it's very possible that a toothpick or plastic piece will still not be able to dig in as much as needed & you will need a thin sharp metal pin to do the job. I really appreciate the uploader for inspiring me to do this one last time as I was literally about to sell the phone for parts. Thank you so much!!
What I did which helped a lot with getting down deep was take some nail clippers and clip the toothpick along the grain so that it splits into 2 shards. From there you can pull pieces off to narrow it even more
THANK YOU! I was resorting to slower inductive charging cause my cables won't stay in anymore, but NOW, I can can do fast charging again, and i can use android auto again!!! Thanks Paul!
Done it plenty of times on old electronic ports. But a toothpick also works well on game controllers and mice that build up sweat, skin and dirt in the seams.
I just tried this on my Pixel 4a and he's right. His method worked perfectly! I was going to replace the phone. Now I don't have to. Thanks for the great advice!
I did try it on my Google Pixel 2XL and it immediately went back to charging saying, 'Charging Rapidly", then, "Charging 32 Min till full". It was awesome trick, thanks!!!
isn't it odd that most other pieces tech with charging ports have protective covers ranging from little flaps of rubber to threaded aluminium caps, yet cell phones are still wide open and unprotected.
I'd like to personally thank Joe for having a micro USB port on his phone...on behalf of people like me who also still have a phone with such a port. We are not alone people! Joe is one of us!
No you are not alone, many budget phones still come with Micro USB like the Motorola Moto E lineup, as bought my Mother a Moto E5 Cruise not long ago to replace her E4 that stopped charging(the port itself was damaged), and yep Micro USB.
I'm having a similar challenge with the power port for my surface 3 computer with a USB micro cord that won't charge. I'll give it a try with appropriate precaution. Thanks for posting the video!
Was thinking about this a few days ago... having a little trouble with the C port at times not going to turbocharge. I usually use compressed air to clean out the port every now and then, but a thorough cleaning might be needed. Thanks for the vid.
Wow, worked like a charm! There were multiple layes of link, so took multiple passes of cleaning. Now the connection works like when it was new! Thanks!
i have a cheap dental scraper and bent the point over into a "L" shape it works great. It gives you a lot more wiggle room. also for the mini usb it has little hooks or tabs that catch a groove/hole in the charger housing of the phone, You can dig out those holes with the dental scraper which will help the charger stay in. but since it is metal, turn the phone off and if you can take out the battery, also just try and not touch any contacts. i have rubbed across them on accident with no issue but just to be safe I avoid them as much as I can. Also a little alcohol on the end of a straw from a broom, like not even 1/2 a drop will loosen that gunk some. A permanent fix, those charging cables that connect magnetically, the adapter stays in the hole keeping stuff out while its in your pocket
Small thing needles, especially pins with a nice ball to grip, work amazingly well for this. You can also use some plastic that you've trimmed down from any packaging you have lying around.
Another idea is to use what are known as ‘Flosspicks’ for cleaning out the ports. They are thinner than normal wood toothpicks and could slide in those tighter areas without much manipulation.
Yes, This definitely helped, I was being patient during cleaning, I kept on checking the internal with flashlight and agin back to scrapping, little by little until the base of the connector was shiny. Phone is as good as new now. Thanks a lot :)
This technique works way better on Lightning ports for iPhones. I've done this twice on my phone before, got a bunch of lint out of it, after realizing the cable only was able to stick into it at an angle, and it being wobbly and not very strongly connected.
If you have lock pick set ,shallow hook work great because it is made from extremely thin spring steel and its easy to maneuver around in port.Also to prevent future buildup get silicone plug cower from amazon they are pretty cheap.
Worked at Verizon for 7 years and can verify that this solves charging issues most of the time. This will work on both Type C and Lightning ports.
came here to say this, I have found the needle nose tweezers from the ifixit kit work wonders
I used the tool that removes the sim tray on my iPhone lightning port and got a load of fluff out. Cheers 🍻
@@starcitizen890j5 I did that recently with the sim tool that came in my Walmart Hypertough electronics kit on my girlfriend's old LG phone, and it helped the Micro USB port, well that, and a new $1 cable from $1 Tree lol.
⁹
@@starcitizen890j5 Protip right there! Everybody has one of those!
I sell phones for a living and I can't tell you how often customers come in with a phone they say won't charge anymore and it's just because there's gunk in the charge port. I use small rubber coated paper clips and canned air to clean them out.
I use the pick end of a floss pick since the plastic is typically bendy enough to get those rounded corners easy too.
Good idea, I might try that next time, I usually use the little sim card tool that came in my in my $10 Walmart Hypertouch electronics repair kit, and I feel it's almost as good as the more expensive Ifixit kits.
Exactly what I was thinking. The floss picks have a very fine point and are more flattened.
Me, too. First time on my iPhone Lightning port, I used a wooden toothpick and cleaned out a crap ton of lint. Since then I've used the plastic tootpick end of the floss pick. They're thinner and don't have bits of wood that could come off.
Thanks, that worked like a charm
Good idea. It's better than using a toothpick which can break little bits of wood into the gaps. I like the idea of using a plastic sheet (like you might find on wrappers for small electronic items like usb drives and headphones), cut into a little digging tool (using scissors). Only need something like a half inch by an inch with a sharpened end to dig out the lint. Especially useful for the microusb kind.
Paul, I cannot tell you how ecstatic I am from this video. I’ve had my One plus X for 5 years now and was about to call it quits until now. This worked perfectly and now I’m planing on keeping my phone for as long as it’ll go! Thank 1 million times over!
I cleaned my headphone jack and a cat fell out
Yarrk47
cheap crap? why you still cry here?????
@@lucasrem what lol? Are you still circlejerking because apple removed the jack?
@Yarrk47 that was my cat you jerk!
😂😂
😂
Something else to add to your toolkit regarding this is that its common for people when pulling out their cord they do not pull it straight out and instead pull at off angles. This causes the thin metal shroud casing that in fact is a guide for the charging adapter. This gets stretched over time and bent out of shape and causes the adapter to wiggle and can and often does allow for a lose fit that does not properly connect. You can take an exacto knife and gently pry around the outer edges of this casing to bring it back down to where it will grab the connector and ensure a clamping fit. In a lot of the repairs I have done this is the major problem that cause the issues. Last but not least tell your customers to stop ripping out the cord and pull straight out...;)
Hi mate. Thanks for that. I just got a load of crap out of my USB C charging port. An unbelievable amount! I used scissors to cut a thin slice of credit card type plastic & it worked great. Even adaptable by cutting different hooks & angles. Thanks very much!
@@andymiller1308 Awesome, glad I could help! Thats what makes our community so awesome when we can help one another!
Finally a resource explaining what to do for loose ports that are nicea clean. My 3 year old phone is just really loose and the exacto knife idea just might work!
this was it for me, anyone with a decade of using phones knows that you need to clean the port.
mine was loose as you described, I opened my phone to expose the charging pcb and with some pliers bended the all metal usb c housing back in shape
thanks for the tip man i cleaned a shit ton of junk from the port and it just keep getting of (the port) and tried bending the metal a bit and it worked hope you got blessed year
BTW: I've done the same thing with a NEEDLE on my LG G6. Twice. And I wasn't gentle. After 3 years it still works as new.
we have a badass over here :O
Also used a needle on my samsung s8
I was gonna say, wouldn't a needle be better, even tho you have to be more careful? Since it's a lot thinner than a toothpick.
Well then ill have to try that. My lg g6 just stopped charging completely after weeks where it only charged when pressure was applied on the cable in a specific way.
@@alittlebitintellectual7361 Please
PRO TIP : if even after doing some lint cleaning your usb cable doesn't go all the way inside the usb port (it should do some sort of click when you plug it in), then it means you have a layer of heavily compressed lint somewhere in the usb port, which can be at the bottom and/or in the corners.
If so, don't hesitate to scrape heavily (just make sure you use wood or plastic, not metal, and that your tool is pointy enough and thin enough so that it doesn't bend or touch the middle part of the port) until you can see some lint coming out.
Took me a while with my Google Pixel 3A, i was about to give up and replace the usb port, and decided to scrape harder with my thin wooden toothpick, and finally saw some lint come out, and after 10 minutes of scraping and removing lint, i could finally plug my cable properly (i could hear the click) and charging was fine again.
A thousand times this. I cleaned it really well with alcohol wet wipes and a thumb tac but it was still not working. Had a replacement part ordered and everything. Reading your comment and others below (the plastic toothpicks that are used to floss was a great recommendation for a tool) i went to my bathroom and REALLY scraped down in there and bits of dirt and lint that i missed came out. Tiny ones but it 100% fixed my charging issue on my zenfone 9. For about a month there I thought my charging cable was crapping out or something..
@@mexcellent227 Glad to hear. Had to go with the same thing a couple of months ago again (happens because my phone is in my pant pocket upside down and i work in outdoor/dirty environments so my USB port gets dirty real quick). Was a pain in the ass but now my charger is working perfectly again.
Those flossers with the picks on them (I use the Plackers) work super well for this because the pick is thin, sturdy plastic but also bendable enough to get the groove corners without even touching the center connector. Saved me from throwing away a nice braided USB-C charging cable thinking it was broken when my Pixel 3 port was just packed with lint and works like new again.
Thank you for the floss pick suggestion. Worked like a charm.
It's funny that you posted this video. I actually have been having the issue of my charger not staying in. I would have to lay the phone and not move it AT ALL or the charger would fall out. So I took a really thin toothpick and got SO MUCH dust out, and it works better than brand new now!
Awesome of you for posting this because I'm sure there are people that didn't know about this. I know I didn't for almost a year!
I've done this often over the past few years, just to keep my phone clean. I started with using toothpicks but have found that it is easier and more efficient to use sewing needles and those pipe cleaners you find in the craft section (it's as if they're made specifically for cleaning things 😂)
damn thanks for the comment toothpicks didnt work for me because the grime was just to hard but with the sewing needle i got most out and its just so satisfying that it holds now :D
This worked for me. I successfully cleaned out a year of pocket lint and warehouse dust. Thank you
Wow, thank you! My USB-C port had been giving me contact problems for a while, and even though it might seem like a no-brainer to use a toothpick to clean it out, I had just never imagined that a simple accumulation of gunk could be the real reason. When I took the toothpick to the port, I was horrified by how much crap came out of it. I also gave the same treatment to the audio jack that had been failing, too, as well as the microphone hole and the speaker grille, and now I have a phone that's as good as new!
I've had to do this multiple times, especially for my father and uncle when they couldn't plug their phone into their computer to transfer files.
I preferred using a sewing needle or a long thumbtack as I had to punch through a hard-packed layer of solid lint. You'd start pulling chunks out and think you got it, but no, there was a whole 'nother layer packed down solid.
Old toothbrush for cleaning. :P
@@TechyBen I dont think a toothbrush would have helped with those phones. More like the dentist's scrapers 😬
I bought little silicone port covers for my phone.
Before that, I was using magnetic cables, so there was always something plugged in, but those started charging slowly at random so I gave up on them.
I've been doing the same with magnetic charge since day 1 to protect de port. After a year I can't fast charge anymore :(
Thank you! You just saved me $500+, as I was about to buy a replacement to my Google Pixel 2, which is still working flawlessly but was having issues charging. Since charging was the only issue, it is as new again.
Magnetic Charging Tips FTW! Keeps your port clean because it's for a magnetic charging tip in it at all times, keeping junk out.
Great video though!
This. They also have data transfer.
Oh, now I get the deal with magnetic cables for protection. So, basically, a permanent port plug.
I've been wirelessly charging for about six months over this... THANK YOU! the wooden toothpick worked better than I expected
What about using compressed air to clean that out or will that risk forcing dirt somewhere you don't want?
Loved the music variety
You know, I NEVER would have thought of doing this!Thanks for making this video, Paul.😁👍
I fixed my USB C port on my iPad. It turns out, it did not have lint in it. So then I got a green Gum brand interdental brush (tight fit) and some alcohol. I poured alcohol on the plastic cover for the Interdental brush and covered the tip with my thumb to keep the alcohol from draining out. Then, I dipped the brush in the alcohol and used the wet brush to clean the port. The brush was small enough to fit in and it has a little joint on it to help it move freely. And, it pulled out a lot of dirt or oxidized metal. And, now it charges. Who knew?! My iPhone has a lightning port. I did scrape out a little lint. And, I found that the DenTek brand wide Interdental brush (blue) dipped in alcohol worked miracles. I will say that this video definitely inspired me. I was so stressed that my devices would never charge again. And, I am surprised at how close I came to giving away a perfectly good iPad for a trade-in when it works just fine. So thanks!
Tried on my Pixel, I never thought it had too much of dust, Fast charging is back alive now. Thank you.
i use a phone case and it has a cover for the usb type c charger port so it stays clean in my pockets.
Something about an ounce of prevention...
I've not seen a wallet phone case for my Moto G7 that has that, but I have found some generic USB C port covers for $1 with free shipping on eBay.
www.ebay.com/itm/10pcs-Rubber-usb-type-c-dust-plug-charger-port-anti-dust-cover-D-/383046330408?_trksid=p2385738.m4383.l4275.c10&var=651659052282
the only trouble is not looking them when they are not in the port lol.
TaintedGQ
Forgot what Phone u uses, why nerdy people never understand what they do, why they keep crying here?
USB????? A or C, all the same..Just a plug!
@@CommodoreFan64 why the ebay crap??? why the cheap android?
What is it you try to say here, you love cheap crap?
Now I want to find a rubber plug of some sort for it. My old LG flip phone had rubber plugs for every port. I managed to lose the plug for the charging port eventually. USB-C is so ubiquitous now that someone must sell what I want. Hmm . . .
Edit: Found dust covers for USB-C ports and headphone jacks:
www.amazon.com/innoGadgets-Smartphone-MacBook-Protection-Headphone/dp/B07KQDDCX2
Thanks thanks thanks... With my Pixel 4, I found the wooden toothpick good for getting the crud moving, but a narrow interdental brush works great for lifting it all out. The brush bends so goes into all the corners. Also needed a bright light straight down into the socket. Be gentle but persistent: there will still be lots down there even when you think it's clean. Very satisfying when cable fits 100% again and stays in!
I've used a plastic flosser pick, blew air, picked again, more air, over and over. Virtually no lint came out, just got on the pick. Still no better
There's a new cord option 'as shown on tv' which is a magnetic dongle. The dongle plugs in with a smooth magnetic cylindrical end to it where a magnetic USB charge cable connects to it.
Just cleaned my S21 today and I had no idea how much dust and debris got in there from my pockets. Needless to say you saved me from getting a usb c repair!
I have to admit that initially I thought my charge port was broken and needed replacement. But after watching this video I felt like crying because all that was wrong was my charge port was dirty. I can't say enough about how much I appreciate the video. THANK YOU!!!!!!!!
Such a life saver. I've been struggling with this very issue, and I thought I was going to need to buy a new charging port for my phone. Thank you Thank you Thank you. Even 4 years later you're still saving lifes.
Holy cow this was insanely helpful on a year and some change old note9 never really took the time to realize how dirty my pockets are... even though I use wireless most of the time this is very useful for those times that I either use wired for DeX or when i do have to wired charge.
My note 9 aux jack stopped working but a few months ago I found an old forum post about this. Used a toothpick and it pulled out a giant chunk of lint out
a sim card ejection tool works wonders as well. nice and thin but still strong enough to be able to flick the gunk out of the port
I can't believe this worked! I never leave a comment but this deserved one. The intro holding the cell phone by the cord got my attention. I did take the advice of another viewer and used a plastic dental pick to clean out the narrower side after realizing that the toothpick was not doing the entire job. I was considering taking the phone apart but you saved me a ton of aggravation and maybe the cost of a new cell phone had I destroyed it. Thanks a million!
*frantically googling how to fix a charging port
"I'll tell you how to fix it"
*phew
"But first an anecdote"
*glancing nervously at 11% battery
Worked, though.
I been putting up with my jack not letting me connecting for charging for over 3 years. Finally decided to get it fixed and checked on line to see if I could replace it myself. Cam across Paul's Hardware video and checked my port closer......sure enough full of lint. Can't believe I didn't catch this one sooner. Saved me over $100 dollars to take it into cell phone repair and have the port fixed/replaced. Thanks great video....never would have thought it was just packed full of white lint from clothing. Thank you for your video
Huge thanks, had a slack connection when plugging into the port for some time. Cleaned out, with extreme care, took some time to totally clear, compacted dirt needed coaxing out, now clicks into the port, well and truly secure.
I work at Apple and the way we have to clean it as technicians, they give us ‘cleaning putty’ which is just a fancy name for blue tac which does a very good job for speakers, AirPods, etc but for the port, I’d recommend to use tweezers if available or a high pressure air compressor to remove the dirt and dust
Woooowowowow! I cleaned mine out with a needle and was impressed by the amount of fuzz that came out, and the plug still didn't fit well... so I tried a second time and the same amount came out AGAIN! I've been charging my phone on the wireless charger only for almost a year now. Thank you for posting this video!!!!!
Oh how I wish for the days when you used to have covers for those ports.
Same except when someone came over to your house stayed a while to say watch a football game, and said can I get a charge I forgot to charge last night, and they would have some connector that only that brand, or specific model of phone used.
There are plugs for them
I swear they do it on purpose sooo you'll buy a new phone
@@cjb444220 They make your pockets dirty?
With a toothpick it felt like I was putting too much pressure against the middle connector to reach the very bottom, I used my SIM eject tool and it worked great! I got a bunch out and I still couldn't hold it upside down with a cable but then I got a flashlight and could still see a bit on the very end. Once I got that worked out, I can hold with a cable and swing it around a bit without it falling! Thanks for the video!
Still using my Pixel 3 until I just have to upgrade, but lately I have had all kinds of issues charging it or plugging it in to my truck for Android Auto (I would drive over the smallest of bumps and it would disconnect). So then I searched on how to fix this, found your video, got the toothpicks and a knife out...and now it works!
Thank you!
Sim eject tool or paperclip are my go to followed by dry toothbrush and compressed air. make sure phone is powered down before to avoid any shorts. works a treat.
THE solution!! I was ready to take it to a repair service. I almost NEVER charge with a cable. Instead use a wireless charging pad. But, my phone is always in my pocket gathering lint and dirt. It was stuffed with it. Thank you!!
thanks for this so much, cleaned out my port on my Galaxy Note 8 (I've had it since launch) and it now charges WAY faster and the charger doesn't just fall out randomly anymore. Absolutely night and day difference. Never would of though of doing this.
Also, the plastic toothpicks with floss on one end helps. The plastic pick part is thinner than a wood toothpick. Literally did this with my S8 three days ago. Night and day plug grip. Like to move this to the top and help others!
I did this with my Pixel3 XL the other week. I use wireless charging, but noticed when I tried to plug in the stadia controller I couldn't get a connection. A quick swab/scrape with some toothpicks I cracked in half cleared out a ton of pocket lint (and who knows what else). Although untimely, the video was still great, because I have also now changed my phone background to a Calvin and Hobbes cartoon on a forest photo background. Thanks!
Much appreciated. I typically carry my phone in my pants (front) pocket and happened to have it there when I weedeated yesterday afternoon; lots of sand in my hair, shoes and down my neck. (I won't be carrying it while doing that again.) Later, I found that sand would not let me attach the charger cord. I took a piece of sandpaper and reduced a rounded toothpick to opposite flat sides on each end, like a screwdriver, and cleaned around the port, holding it over the white sink in the bathroom. I wanted to be sure to see what might be there. I was surprised what came out. One grain of sand dinged off the mirror. I also used an old dry toothbrush and got even more; lent, etc. Now the charging cord fits like a glove. My thanks for your video.
I recently just did this. I used a very small plastic zip tie. Worked great. Then I went and ordered some type C dust plugs. I use wireless charging mainly but sometimes need to fast charge.
I was just recently thinking why phone charging port isn't working that well. This came really handy! Thanks!
I have done this by cutting a piece of a bubble pack ( the plastic part of an AA or AAA battery package works well ) into a small pointed tool. It helps each time too
also try using a toothbrush you can be a little more aggressive with it and at the same time more gentle - I made a video on this a while ago and it has helped quite a lot of people.
Was having this same issue a few weeks ago. I used my sim removal tool. It's thin enough to get to the bottom without touching the center post.
The amount of dust and lint that I pulled out was shocking
I did this with my grand-daughter's phone several weeks ago. It was no longer charging at all and her dad was preparing to buy her a new phone! I used a can of electrical spray cleaner and a toothpick to clean out the gunk that was in all of her ports and now her phone works perfectly! I wonder how many people have bought new phones after thinking their phone had died?
After 4 years i still using this method and before i got my certificate for fixing computer and phones i learned this from you, legend
Been wireless charging my LG G6 for...well, since i got it around 2 and a half years back. I had always figured that i just had a bum jack until i stumbled across this.
Thank you! Such a simple trick! I'll definitely pass this on if i find anyone else experiencing this!
I cleaned my type C port with a loose stanley knife blade! It's thin enough to fit in the port and stong enough to get all the gunk loose!
Definitely worth a try!
Great demo. I just fixed my charging problems. Instead of wood toothpick. I had plastic flat pick/floss and can of air.
For future prevention. I found silicone dust covers on Amazon.
Wow I really hadnt thought of this, but I totally needed it! Took 15min of picking with thin plastic tools and some compressed air to clean all the crunk out, but it actually latches to the charging cable now.
My USB-C port on my Huawei Mate 20 Pro barely allows me to keep a cord plugged in. Certainly can NOT hang my phone upside down like in your video. The only way I can charge is to plig my cable in and shift it slightly to the side and not move it. Sometimes 40W super fast charging kicks in but mostly only charges in standard mode. I SERIOUSLY doubted your fix would do anything as I figured the USB port was simply worn down. After spending time with a shaved down toothpick scraping and picking away at the inside of the connector port, I was actually amazed at how much hardened chunks of dust was coming out. So, I tried reconnecting my charger, but no luck. It still had the same issue. So, I sprayed a little electrical contact cleaner on the toothpick and let some drop in the port then started scraping and gently maneuvering the toothpick around. STILL more dust and crap came out. I realized I was near the end of all that crud when I saw the metal bottom of the port showing! I could never see this before. Sprayed a little bit more contact cleaner inside and finished up the cleaning and blew out the port with some canned air. Then I tried connecting my charger and I was blown away! It had a super tight connection with instant 40W charging! Plus, I can do the upside down cable test! THANK YOU SO MUCH FOR THIS FIX!!!! 🍻
I do this few times a year with my phone (my previous Oneplus 2 and current Pocophone), but I do it with a safety-pin. A toothpick couldn't get everything out. The sharp point of the needle helps me grab the dirt. Because the shaft is thinner it works also better with micro USB. It helps a lot!
PS: And my wifes phone didn't need it too. Is it because of the purse!?
Say what you will about Lighting, but that port is designed to never lose grip and have extremely consistent grip because of the indentations on the plug and the spring loaded grips inside the port. Lots of USB-C ports have very inconsistent grips even if the port is completely clear of dust/debris and tend to loosen over time.
Called Samsung and they said it would cost a bundle to fix my S8. They also never mentioned that it was probably lint. Followed your advice (tweezers thinner than toothpick because tp was a little too thick) and it's fixed. Thank you!!
Note rather than dust, some phones develop a connection issue, I recently found that some XZ premium owners had issues charging due to the connector going from the type C port gets damaged/weakened over time.
Thankyou so much for this. I'd Tried a toothpick before but didn't think to shave it thinner. I've been told not t use metal as its electricity and could seriously damage the phone. Thx again!
Just about to go out and buy some new charge cables. Tried this fix and they all fine now on my old Samsung tablet. Thanks for the tip!
I cleaned mine using a thin cable/zip tie. Mine only had lint, but it was pretty thick. Thanks for the heads up!
Thanks Paul, I tried to clean my usb C socket a while back but couldn't think of a good non-conductive tool, being a tech I was not thinking of household items. The toothpick work perfectly, and enough crud came out to refill the socket to the top.
I did this today on my S22 and I pulled so much gunk out of it. It had problems disconnecting from chargers and a USB-C microphone (causing big issues and lost time on projects). Now the mic visually goes in all the way and has that secure "snap" feeling again. Awesome.
And I just found my old MicroUSB Samsung that stopped charging and cleaned it out too and what do you know? It's charging now. It needs the replaceable battery swapped but I'll pass it down to a nephew and keep it out of a landfill.
Another technique you can add to your (cleaning tiny places) is use a blu tack and press it down in the tight and hard to reach places. Speaker and microphone grills are the best to clean with this method. Hope this helps anyone
I think the plastic tooth toothpick with attached flosser work better and are less risky. Especially the ones that have a slight barb style end. You can shave the barbs off the flat side and it then makes a great tool for this.
I have also used the dental floss picks, too. (The plastic ones that are disposable) and an old electric toothbrush to help loosen up gunk around speaker ports.
Thanks Paul, I just finished cleaning out my type c port and have fast charging again.
I know this is an older video that you probably do not follow the comments on anymore but I just discovered it in my time of need. Thank you SO MUCH for this video! It was such a help!
Hey Paul I just did this 2 Months ago to 2 S9+ phones my Ranch guys use and I used a Flat Dental pick they are made out of flat plastic also use canned air BUT VERY Gently if doing the speaker. Both phones now fast charge like new!!
R.I.P. KOBE & GIANNA BRYANT!!! Cow}:-o)
A good preventive measure is using a magnetic USB cable - having a small USB nob almost prevents any dust or other kind of just from going into the port, and u have the added benefit of having one cable that can work for multiple devices
Great info! I used a larger size straight pin and got 2 good sized chunks of lint!
they also have those magnetic charging cords that leave one end in the charge port on your phone. not only does it save the durability of your phones charging port but it also blocks out dust and stuff
It also helps against factory flaws like the Nokia 7 plus sub board design fail :D
If you're having this issue my advice is don't give up, in fact try harder. I was so convinced my charging port was just broken from use overtime & had already gotten a new phone, but really wanted to keep the old one as a backup because it still works incredibly well despite it's age (OP7 Pro). After watching this vid I thought "ok screw it" tried with a plastic toothpick & wood, didn't do any good, nothing came out & under a flashlight didn't even appear like lint was my issue.
As a last resort I grabbed a metal pin from a sewing kit, at first nothing but then I really dug in, and holy crap the amount of compressed lint that came out had my jaw dropped. just kept going & into the edges on both inner sides of the charging port around the stub. Still took a few back-and-forths plugging it in & scraping more but it's now sitting here fast-charging for the first time in 4-5 months. So yeah, it's very possible that a toothpick or plastic piece will still not be able to dig in as much as needed & you will need a thin sharp metal pin to do the job. I really appreciate the uploader for inspiring me to do this one last time as I was literally about to sell the phone for parts. Thank you so much!!
What I did which helped a lot with getting down deep was take some nail clippers and clip the toothpick along the grain so that it splits into 2 shards. From there you can pull pieces off to narrow it even more
No, bloody good vid, and not too long for newbs at phone repairs who need every bit of instruction to make the lesson stick!!! Thx mate!
THANK YOU! I was resorting to slower inductive charging cause my cables won't stay in anymore, but NOW, I can can do fast charging again, and i can use android auto again!!! Thanks Paul!
Done it plenty of times on old electronic ports. But a toothpick also works well on game controllers and mice that build up sweat, skin and dirt in the seams.
I just tried this on my Pixel 4a and he's right. His method worked perfectly! I was going to replace the phone. Now I don't have to. Thanks for the great advice!
I did try it on my Google Pixel 2XL and it immediately went back to charging saying, 'Charging Rapidly", then, "Charging 32 Min till full". It was awesome trick, thanks!!!
This is why you are Paul's Hardware. You deliver useful videos using ANY hardware around the house.
Heartwarming !!! 🙋
Clean the lint of mine and it worked! Thanks alot! I was getting ready to order an USB replacement part.
isn't it odd that most other pieces tech with charging ports have protective covers ranging from little flaps of rubber to threaded aluminium caps, yet cell phones are still wide open and unprotected.
I'd like to personally thank Joe for having a micro USB port on his phone...on behalf of people like me who also still have a phone with such a port. We are not alone people! Joe is one of us!
No you are not alone, many budget phones still come with Micro USB like the Motorola Moto E lineup, as bought my Mother a Moto E5 Cruise not long ago to replace her E4 that stopped charging(the port itself was damaged), and yep Micro USB.
I'm having a similar challenge with the power port for my surface 3 computer with a USB micro cord that won't charge. I'll give it a try with appropriate precaution. Thanks for posting the video!
Was thinking about this a few days ago... having a little trouble with the C port at times not going to turbocharge. I usually use compressed air to clean out the port every now and then, but a thorough cleaning might be needed. Thanks for the vid.
Works like a charm! I thought my port was worn out but it was just filled with lint.
I find the plastic flossers work the best for this. They are very thin, but stiff enough to get out the gunk.
Wow, worked like a charm! There were multiple layes of link, so took multiple passes of cleaning. Now the connection works like when it was new!
Thanks!
i have a cheap dental scraper and bent the point over into a "L" shape it works great. It gives you a lot more wiggle room. also for the mini usb it has little hooks or tabs that catch a groove/hole in the charger housing of the phone, You can dig out those holes with the dental scraper which will help the charger stay in. but since it is metal, turn the phone off and if you can take out the battery, also just try and not touch any contacts. i have rubbed across them on accident with no issue but just to be safe I avoid them as much as I can. Also a little alcohol on the end of a straw from a broom, like not even 1/2 a drop will loosen that gunk some. A permanent fix, those charging cables that connect magnetically, the adapter stays in the hole keeping stuff out while its in your pocket
Small thing needles, especially pins with a nice ball to grip, work amazingly well for this. You can also use some plastic that you've trimmed down from any packaging you have lying around.
Yep, I use a paper clip for the lighting port on my iPhone. Works like a charm.
Another idea is to use what are known as ‘Flosspicks’ for cleaning out the ports. They are thinner than normal wood toothpicks and could slide in those tighter areas without much manipulation.
Yes, This definitely helped, I was being patient during cleaning, I kept on checking the internal with flashlight and agin back to scrapping, little by little until the base of the connector was shiny. Phone is as good as new now. Thanks a lot :)
This technique works way better on Lightning ports for iPhones. I've done this twice on my phone before, got a bunch of lint out of it, after realizing the cable only was able to stick into it at an angle, and it being wobbly and not very strongly connected.
If you have lock pick set ,shallow hook work great because it is made from extremely thin spring steel and its easy to maneuver around in port.Also to prevent future buildup get silicone plug cower from amazon they are pretty cheap.
Did you mean silicone "cover"? Just asking for a friend (Popp/Blake).
THANK YOU! This solved my problem with Android Auto disconnecting whenever I drove over a pothole or speed bump