Really enjoyed this video!! Doesn't look like a hard install too, just a lot of parts! Get some insane shafts if you take it to cayuga but it's already too cold for that lol
Yes yes the thing that scares me most about turbo charging an 8th gen.. the heat control so close to all the firewall components. I think you should do a long term review on how things hold up back there. Coming from a Kawapped integra I can tell you the heat killed everything within 8-10 inches of the header. Had a Ktuned ram horn header and had to switch to a more low profile DC swap header. I hate heat!! Lol
From your experience which would you recommend a newbie supercharged kit like kraftwerks or a turbokit such as this prl? My 8th gen is just fbo with basemap for now. I just want a mild mid 300's horsepower
Nick ive heard LHT performance even say older S2k with lots of miles do sometimes get more HP then newer ones they might have good break in on those miles not sure but go HONDA! lol
@Nick, how is the car holding up So far?? I have a PRL kit i bought brand new. Installed in 2016 car had about 160,000kms on it. Have just over 187,000 now. Running the GTX30r numbers were 420whp 310wtq.
Rebuild the engine , pistons and rods brand new timing everything and new cams With some good oil - castrol edge 530 full synthetic That engine will last for Everrr
@@Robbie2Fly I would like your comment but that sucks man! You know I've heard over the years a lot of people have had issues with otherwise very healthy, low mile k series burning oil like crazy and some just dont. It's really kind of bizarre to me!
Yes i do offer remote dyno tuning - I do it for many shops - I would be happy to remotely dyno tune your setup - If you email me i would be happy to discuss - nick@tuningbynick.com
God i love 8th gen. Fantastic build.
It's amazing on how much gains the K-Series can make.
8th gen by far my favorite civic after the d and b Era!!!
Can we get a drive by go pro type vid next? Cheers 🍻
A new post! *_Heck yeah!_*
Nick i cant wait untill i have my turbo setup for you to tune omg those are good numbers
love the 8th gen content
Really enjoyed this video!! Doesn't look like a hard install too, just a lot of parts! Get some insane shafts if you take it to cayuga but it's already too cold for that lol
I have the prl kit on my car. U gonna love it.
Yes yes the thing that scares me most about turbo charging an 8th gen.. the heat control so close to all the firewall components. I think you should do a long term review on how things hold up back there.
Coming from a Kawapped integra I can tell you the heat killed everything within 8-10 inches of the header. Had a Ktuned ram horn header and had to switch to a more low profile DC swap header. I hate heat!! Lol
Also, still recommend an onboard fire extinguisher for these turbo K powered cars
Good stuff man! Always wondered how that turbo does with a good setup at similar boost levels and stock k series !
killin it bro!!!
Can’t wait to put mine in
8th gen is love
this thing is gonna work good! curious to see about that clutch, and how it holds!
Great numbers for 10psi boost
Such a great curve, love k series!
I’d like to see your starting base map on this tune!
So sick man ! 🙌
Giving me wonderfully bad ideas Nick 😂
How much does that Chinesium choochoo boi cost? Awesome results at 10psi on pump gas.
A wild speed academy appears
This turbo is honestly such a good deal - Its only $455 usd - Here's a link to the actual one I ordered - tinyurl.com/3zh2e76z
From your experience which would you recommend a newbie supercharged kit like kraftwerks or a turbokit such as this prl?
My 8th gen is just fbo with basemap for now. I just want a mild mid 300's horsepower
Nothing beats the sound of a turbo.
Not to mention the turbo would be more efficient as well as cheaper. Although a supercharged setup would be awesome too!
Comes down for that power level at they powerband that you want to have. Seem to both be about the same price.
@@chrisdonnelly5904 turbo is most definitely more $$, unless you use junk parts. These PRL kits with a nice turbo are close to $9,000CAD.
how much you charging for an E-tune ? NA with only CAI and catback exhaust
When will we see more of this car
awesome build. How much this whole build cost to make that power?
Wish the fg2 was made in Japan 🇯🇵 so it would have more aftermarket support like the rsx-s.
$15k CAD budget work for this build? Already have flashpro
I need u to tune my 8th gen when I throw the turbo kit on!!! Fuck sick broo
I only have Prl turbo or cxracing
Do you know how the oil pressure was? How was it with the stock oil pump?
You are killing my wallet now I have to do this to mine.
Nick ive heard LHT performance even say older S2k with lots of miles do sometimes get more HP then newer ones they might have good break in on those miles not sure but go HONDA! lol
What was the max injector duty cycle you hit at peak horsepower with those 1000cc's??
Are you still keeping the a/c components in this build? I’m thinking of taking all my a/c out to reduce weight.
Not worth it.
@@AZ-hf9ow but #racecar
Removve AC at all cost
How much cost you all this set up in usa
What oil should run boosted
@Nick, how is the car holding up
So far?? I have a PRL kit i bought brand new. Installed in 2016 car had about 160,000kms on it. Have just over 187,000 now. Running the GTX30r numbers were 420whp 310wtq.
Why do you low mileage owners act like that's a lot 😵😵😵 fuck man I got a 160,000 MILES on mine that's like 250,000kms
@@repingers9777 I’ve got 577,000 kms on my 06 LX sedan. (360,000 miles) original drivetrain. Hell all fuel components are even untouched 😎
Any heat issues against the firewall?
Can you leave link I want to get the whole kit too
Hey nick, are the old boltons for sale?
Rebuild the engine , pistons and rods brand new timing everything and new cams
With some good oil - castrol edge 530 full synthetic
That engine will last for Everrr
what final drive and gearing are you on?
whats the website to get full kit?
who did your honda build??
How did the turbo alone add 200 WHP?
It sure did, on a bone stock engine. K series are incredible!
@@chrisdonnelly5904 mu 2008 Si burned oil like a mofo man.
@@Robbie2Fly I would like your comment but that sucks man! You know I've heard over the years a lot of people have had issues with otherwise very healthy, low mile k series burning oil like crazy and some just dont. It's really kind of bizarre to me!
did you run coolant through the turbo?
How much did u pay for the whole setup
Still running?
What turbo kit is this?
on 91 oct or E-85?
turbo 8th gens si prl turbo gt35r dyno
AC ON OR AC OFF?
Are you running 91
My tuner is in Montreal. Be trying to tune my for almost 2 years now. I have a dyno just wondering if you would be open to tuning wireless?
Yes i do offer remote dyno tuning - I do it for many shops - I would be happy to remotely dyno tune your setup - If you email me i would be happy to discuss - nick@tuningbynick.com
Nice and rusty just like mine
Did you change anything internally?