NON RUNNER £30K BENTLEY ARNAGE 6.75L GAMBLE PART 2
ฝัง
- เผยแพร่เมื่อ 5 เม.ย. 2022
- Westminster auto spares +44 7501 615748
USE CODE :- SR10 for 10% discount on your Car Vertical Check. Get 10% off car vertical with this link bit.ly/SalvageRebuilds
Click here if you would like to buy us a coffee :- www.buymeacoffee.com/SalvageR...
For all sponsorship, Business /media enquiries please email :- rebuildssalvage@gmail.com
Please note Rob and Chris cannot be contacted on the above email as we do not have access. If you would like to get in touch please use private message on Instagram and always include your contact number. We do not have any other social media including Twitter , facebook , Marketplace , etc
In this video we continue work on the non runner Bentley Arnarge 6.75L
Working at our fully equipped workshop in Kent we carry out tasks including Panel beating , Body work , Mig Welding , Sheet metal Spot Welding , Fabrication Chassis Repairs , Sand Blasting , Engine and Mechanical repairs , DPF cleaning , Restoration and Structural repairs on the Celette Jig frame machine.
We do hope you enjoy this video and Check out our other videos on all kinds of vehicles including Barn finds , Quick flips , First wash , Repairs , Salvage , Restorations , Will it run , Fail , Accident damaged , Cat S , Cat N , Cat X Copart auction bargains , Non Runner , Banger ,Flood damage , insurance write off , fire damage , smoke damage , electrical fault , stolen recovered , Unfinished project and anything else that arrives at the #Salvagerebuildsuk workshop. #RobandChris .Please note We do not ' cut and shut ' and have no videos on this subject.
Please check out our back catalogue of some previous projects on various different makes and models including Ferrari, RS Turbo , Lambo , Land Rover , MG , Caterham 7 , Ford , Cosworth , Vauxhall , Fiat , Peugeot , Mercedes , Range Rover ,Bentley , Morris , Renault , Citroen , Honda , Toyota , VW , Series 3 , Evoque , GLA , Golf , 500 , Fiesta , Astra , Polo , Motorhome , Auto sleeper Camper , GTI , LSE , Lamborghini , Gallardo , LP 570-4 , Sierra , Midget , 360 , Transit , Crafter , Transporter , T5 , Combo, Berlingo , Partner , Mini , Beetle , Vivaro , Hilux , Sport and many more!
If you have a vehicle for sale that you think will be of interest to us please message Rob via Instagram and please include a contact phone number. We buy all sorts of vehicles , Boats and classic cars including Austin , Morris , Healey , Mg , Sunbeam , Talbot , Opel , XR2 , XR3 , XR4 , Bentley , Jaguar XJ6 XJ12 XJS , E Type , XKR , BMW E36 , 205 GTI , VW GTI , Viva , Astra GTE 2.0XE , Red Top , Triumph TR , VW Golf Beetle , Rover , MGB , 2CV , Midget , Nova , Chevette , Capri , P100 , lancia , Cortina MK1 Mk2 MK3 MK4 MK5 , GT6 , Jensen , Lotus , Bedford , J type , Minor , Datsun , Toyota , Sunseeker , Princess , Fairline , Windy , Hardy , RIB , Shetland , Fletcher , Bayliner , Searay , Pilot , Shakespere and many more!
We do receive quite a few questions regarding tools and equipment that we use for various jobs. Unfortunately there is to many to list but some of the brands we use include Snap-on, Blue-point , Makita , Sealey , Clark , Esab and Sykes-Pickavant .
If you are interested in a specific tool, please put your question in the comments section of the relevant video
Working at our fully equipped workshop in Kent we carry out tasks including Panel beating, Body work, Mig Welding, Sheet metal Spot Welding, Fabrication, Chassis Repairs, Sand Blasting, Engine and Mechanical repairs, DPF cleaning, Restoration and Structural repairs on the Celette Jig frame machine.
We do hope you enjoy this video and Check out our other videos on all kinds of vehicles including Barn finds, Quick flips, First wash, Repairs, Salvage, Restorations, Will it run, Accident damaged, Cat S, Cat N, Cat X Copart auction bargains, Non Runner, Flood damage, insurance write off, fire damage, smoke damage, electrical fault, stolen recovered, and anything else that arrives at the #Salvagerebuildsuk workshop. #RobandChris
Please check out our back catalogue of some previous projects on various different makes and models including Ferrari, Land Rover, MG, Caterham, Ford, Cosworth, Vauxhall, Fiat, Peugeot, Mercedes, Range Rover, Morris, Renault, Citroen, Honda, Toyota, VW, Series 3, Evoque, GLA, Golf, 500, Fiesta, Astra, Polo, Motorhome, Auto sleeper Camper, GTI, LSE, Sierra, Midget, 360, Transit, Crafter, Transporter, T5, Combo, Berlingo, Partner, Mini, Beetle, Vivaro, Hilux, Sport and many more!
We do receive quite a few questions regarding tools and equipment that we use for various jobs. Unfortunately there is to many to list but some of the brands we use include Snap-on, Blue-point, Makita, Sealey, Clark, Esab - ยานยนต์และพาหนะ
"Depends how much you're going to waffle" Chris with the comedy gold again 😂😂
We all love a bit of Rob waffling haha
😂😂😂
Alot...But we all love it. 😄😄😄🦘🦘🦘🦘🦘🦘🦘
Just had to laugh .. Robs got plenty of bunny…
Beat me to it Tyrone - I laughed out loud when Chris said that !
Lambo's , Bentley's , Vans , convertable's classics , scap runs , This shows got the lot keep em coming loving it.
Also shipping containers and ride on mowers. They've also done motorbikes and a jet ski.
Sewing machines next!!
And food mixers.
Rob's reaction bit like a lottery win, looks like another SRUK miracle is on the cards and once again Chris's dry comments are gold.
Chris was dam right about the reverse polarity absolutely love the passion you two have for this car a big well done.
It’s so bad that people are making you feel hounded when you are always so busy! They need to remember TH-cam is secondary to your actual business! Love seeing Rob getting so excited when a non-runner starts 🤣
Rob looks so happy
Guy's don't have to explain to us. Just keep doing what you are doing.
I personally love them.
I always feel made up for you guys when it all goes together.
I could feel your genuine joy when that turned over. Glad it’s going in the right direction now.
As ever, loving the channel and content. You often mention about video lengths being too long but I’d rather watch you and Chris for an hour than some rubbish on Channel 4. Far more entertaining!
Never seen Rob so happy dare i say even more than when he got the Lambo , watching him all excited and buzzing made the video for me. Great video as always guys thank you.
Great news on the Bentley lads!!!! With regards to the way things are filmed, I’m extremely happy as I’m sure a majority of the subscribers are with the way you do it. You both put in so much hard work and I’m just grateful this channel exists and we get to see what you do.
Absolute top video, love the true reactions Chris “depends how much your going to waffle 😂, your reaction every time when an awkward motor starts is priceless & finally how big is your black book of contacts 👍👍
Probably on volume 101 of the black book.😁
I must admit Chris’s comment did make me laugh 🤣
I love Robs reaction when they get the motor’s going,.. I’m sure Chris is just as amused,.. great stuff guys 👍👍🤣
Nice. Nothing like that feeling when a car you've spent days on making little headway finally kicks into life. Good going guys. Made up for you both on this one.
Rob, I agree with Barry I grinned when Chris said " It depends how much you're going to waffle" classic. Also was the mileage 19148 miles. Great video as always gents.
You're excitement when it fired into life is why I love this channel! It shows how genuine you are! Glad the Bentley is finally getting closer to being back on the road!
Hearing you cheer when it started up, and then seeing your huge grin just made my day. Your perseverance has paid off. The great thing about your videos is that they are so honest. No one else does three videos a week. Keep up the great work.
Rob……that feeling when the ‘B’ started on the first turn of the key…..I was right there with you fella 👍🏻 There’s no better feeling than hearing a motor spring into life after so much toil & frustration. Just….keep on doing what you’re doing (Chris as well)…..2 absolutely decent, genuine, straight up blokes, doing a great job, with no bull 🙏🏻❤️
Love the car and love your work, the amount of passion that you put into these cars are amazing. Keep it up
As always, top notch video and a great update. One of the features of this channel is the format and fact that it’s raw - don’t need any GoPro or fancy editing, just keep it real as you do. Thanks for the ongoing efforts in providing excellent content, stay safe Gents, Cheers 👍🏽🙂
You can’t beat or pay for all this enthusiasm. Always brilliant to watch your vlogs and see the real joy in doing what you love. Flipping marvellous. Cheers Colin
Bravo for keeping to your standards Rob and putting content out rather than nonsense. Cracking update.
Absolutely fantastic as always.
Rob, you and Chris don't have to explain yourselves. You both do a job 100 percent. Joy to watch.
Fantastic video, as always. 👍🏻
I’ve said it before, you guys do a fantastic job of entertaining us and acquiring projects to keep us entertained thank you both for all your hard work and dedication to this channel which I know makes you far less money than it would in the USA 👍🏻🏴
It’s alive , well done chaps for sticking with it , it’s been a long haul but your honest standpoint and joy when it fire up … I was jumping up and down with you !!!
Brilliant to be back on the Bentley,been waiting for this one , nearly there guys with this one, compulsive viewing,credit to you both,for fantastic videos ,thanks guys
Great to hear the big Bentley fire up even if it was only for the briefest of moments.
Keep up the good work guys 👍
Brilliant gents. It’s great to see progress being made and the car coming to life.
What a long journey this has been. It shows the complexity of these cars, and the work ( and cost ) involved in resolving any issue.
Great job guys……
Cheers
Yes amazing work and results it was lovely to hear it strike up for a few seconds . Can’t wait to see the next one . You don’t have to explain to us Rob we understand how hard it can be especially on this car. Thanks for sharing this and keeping us updated take care and hope you and Chris have a nice week.
Fantastic! Your excitement when it fired up was brilliant. Two of the most genuine guys on TH-cam.
Always gives me a laugh and a great big smile when you get an awkward one started. Been really looking forward to this one. 10/10 as usual guys 👌
Yessssss your on it now lads 👊, im sure all your subs appreciate how much effort you put into the videos, its so time consuming but sooooo worth it 👏👏👏👏👏👏 keeps us hooked 👌👌👌
Good things come to those who wait guys, and you're videos however you do them are definitely worth waiting for. Learnt so much in such a small amount of time. So thank you both and look forward to catching up on your older ones 👏👏👏
Love the variation on the vehicles, it really keeps my interest up and your enthusiasm Rob when that motor fired was infectious. Love the channel
Well done, guys, I'm really chuffed for you. It's great that you managed to stick with it and not just return it when you ran into issues. Looking forward to seeing it finished. It looks in such good condition that I reckon it should creep into your or Chris' collection?!?
"depends how much you're gunna waffle" 😂😂 class 👌
Totally fried that ecu, definitely toast 😂
Love your enthusiasm when it fired Rob, massive step forward!!
Good luck getting the rest sorted 👍
This is just wonderful. Well done for explaining so well the efforts you have made to get this car running.. Loving it!
Rob always love your enthusiasm when something fires up that's been causing you both grief.
Great news you have some brilliant people helping with this car.
I'm impressed that you have stayed with it for so long, I would have given up by now. Big up to Chris - suggested it might have been a reversed polarity problem in the very first video. He's a clever old so and so and no doubt about it. Hope you make a good profit from this one. You guys deserve it for your dogged determination and running around all over the place.
Great video salvage rebuilds, amazing that it runs, you do a great job Rob with all the editing and putting out the videos, don't change anything 👍👌😀
Thanks a lot for whatever effort you put in Rob & Chris. It just shows how easy it is to fry an electronic component if your not 100% correct in your emergency starting process. I call my workmate The Nose because me can smell the burnt processor’s through the casing. Hope all the resets go okay with the battleship of a Bentley.
Been waiting for this update for months. The style & quality of your updates are positively infectious. Keep it up fellas
Never heard Rob so excited when he was getting the car plugged in 😂😂 brilliant video
Hi Rob and Chris
The look and smile on your face says it all mate 👍
I'm made up for ya both it's worth the wait and effort all good things and all that.
Another cracking video guy's proper.
Great video guys and a very welcomed update on the Bentley - well done, really looking forward to the final episode and seeing it run 👍👍
Rob the utter relief and delight on your face says it all - Let’s hope the immobiliser key & Cct work out - worth checking the battery output as this caused many spurious faults to be thrown up on earlier projects but all being well looks like you both have got a well deserved result 👍👏👏👏👏💥
Patience always pays off in the end.
Defo looking forward to the next one on this.
Keep up the great videos Rob and Chris 👍
238K Subs and all done on a mobile phone! Amazing, shows how good your content is. Loved this update on the Bentley. I am sure Rob will enjoy driving it for a bit when it is fixed.
Looks like a major turning point in getting the Bentley up and running has been reached. Thank you for all of your quality content it is keeping me entertained whilst in Greece.
Quite frankly, those Bentley "Specialists\dealerships" should be ashamed of themselves. Why don't these overpaid people want to own the problem and desire to get to the bottom of it? To plug in and say "No communication, can't help" says it all. They haven't got a clue if "computer says no". They know nothing. They should be consulting with the factory and expanding their abilities and knowledge. Shame on them.
Like most dealerships they are all just fitters that work there.......computer says no......😂
They cannot be bothered unless you offer them 'loads a money' even then I think they would be clueless. 🥺
Absolutely,in an ideal world they should at least have a working 'Test' one to temp fit to the car like we've just seen to rule things in/out
@Paul Desmond. Yeah, "fitters" replacing failed or broken parts. Not proper motor engineers/electricians/technicians in the 21st century. Can't see them graduating into the world of electric vehicles, can you? Stay safe and well.
they don't get enough ecu work to specialize - if the first fault is no coms then you are opening up a hornets nest that needs someone like diag dan to fault find it - if you watch his channel, you'll see that the most unconnected issue can cause the most unsuspected faults.
Absolutely made up for the pair of you ! Hearing that thing fire made my day, still can’t believe a car like that doesn’t have a fusible link to protect the ECU from frying but like you say maybe somebody stuck 24v up it ! Great vid guys , wish you all the luck in the world with this one 👍
Wtf why would anyone do that . Don’t touch anything if you are a fool
I love your videos and have been patiently waiting for this update for months. I've no idea why this car has me so intrigued but can't wait to see it fully working again. Keep up the good work guys.
The lovley way you boys tackle these projects with such a methodical analytical aproach...
Using those years of experience. you where always gonna crack this one.
Excellent news about the Bentley lads. Must be a huge sigh of relief being so close to completion.
I love your passion Rob.
Don’t change your filming, it’s great and real the way it is. The way you and Chris are honest about the ups and downs of the job is the reason the channel is so popular.
I love how excited you get Rob when it turned over. Don't get me wrong I'd be the same, it just put a smile on my face. Keep it going guys, great work and great commitment
Lovely car, I've always loved those shape bentley's.
Love how excited you both still get, the energy is fantastic 😍.
I was very happy to see the update on the Bentley. I love the Arnage, and hope to own one at some point. Bentley probably has a record of the correct program to push into the ECM. I was really excited to see it run as well, even if the computer shut it right down again. I'm looking forward to the next update! I am watching and learning as you go. Nice job so far!
A while back I was watching another youtuber here in the US working on a Bentley Continental that had been vandalized with sugar in the fuel tank. He was a young guy and had not yet learned that what sometimes appears to be the hard way to do something turns out easier and better in the end, than the 'short cut'. I watched this kid spend hours in the 'boot' scooping out the tanks from the access panel in the boot. He burned out a few fuel pumps and clogged several filters trying to purge the system. I finally told him he should just remove the fuel cells and the lines from the car, and wash them out with soap and hot water outside the car. Filter the fuel and save that for the lawn equipment. He would have been hours ahead and money saved, but kids don't always listen. Sometimes they need to learn on their own. I also could not believe that he didn't change the oil before starting it. At least he did not say that he had. He took a dangerous chance with that W12. Once he got it started it appeared to run just fine. He got lucky.
Absolutely love this channel and you guys are such decent, likeable characters! I wish more people were more honest like you these days. Great update on the Bentley, it’s such an old skool bruiser and bags more character than the new ones lol. Great video fella
Always good to hear the excitement in your voice Rob when something works. Will be great to see it finished.
Chris is such a perfectionist - he even puts the packaging back in box neatly 👍👍👍👍
Good workshop practice. Clear up as you go along.
Great video lads.👍
Loved this two parter.It was an edge of the seat marathon of "is it gonna or not" tension. I so wanted t see this beautiful lady of the road breath into life again . So close too! As ever Rob, yours and Chris's honesty, dedication and enthusiasm shine. I cant wait to see the conclusion of this lady's story and hear both of you fill the garage with cheers of triumph. all the best, Kenny.
I watched you guys from the start and when that started I had my own cheesy grin for you. Made up it started and the pure pleasure in your voice said it all.
Keep it up guys, my life here in Australia is waiting for your next video....
Just keep up the great work, love you guys.
I don't want to put any sort of damper on the Bentley, but reverse polarity from a car battery can do all sorts of major damage. The burnt missing bits inside the ECU were the protection diodes which just evaporated. Good news that the ECU change has proven okay for most of it, but I think there may be many other problems caused by the battery reversal.
I think I may have mentioned this in the last video on this car. My friends Brother did the same thing on a Mercedes, it blew the big main fuse and fortunately that was all. There is a term in the electrical world it is called 'Descrimination' too complicated to go into here but provided it works as in the theory I think we may be OK. The wipers and other things work so I am hopeful.👍
Fuses hopefully limited other damage. Clearly there are other small bits the autoelectricians are looking at, wiper motors etc.
Good news is in short supply at the moment so thanks for sharing your joy, chaps. I've never heard you yell like that before when an engine has fired up, Rob, your enthusiasm is so infectious.
Hi guys, I'm an elderly man nowadays but I've been around cars all my life in an amateur way, built a few rally cars, reshelled a few fords, did a lot of rallying as a driver and organiser ect, now I'm retired I can't begin to tell you how much I look forward to your videos, your two great lads, so infectious and honest, keep up the good work, you make my sunshine 🌞🌞
Love watching your videos guys.
I do awkward repairs on circuit boards, and micro soldering repairs, I would gladly try and repair the old one for you, what do you have to lose? Let me know.
Another option is I could swap the chips between the two boards for you, that would get it working with the old data…
Send me your Adress and price to instagram I’ll get it in the post 👍
Yep a good electronics guy with all the test gear could repair this .. got to be worth a go .. at least the board isn’t potted ..
I transferred the data on a Porsche Cayenne ECU which is very close to the Bentley ECU reading straight off the board with a piggy back to transfer imob coding data rather than send the car 600 miles to get it recoded. The mileage can also be corrected over OBD2 on these vehicles using a digiprog 3. Porsche and Bentley electrical systems of cars of this age share many common components.
Alternators rectifiers are prone to partially fail injecting AC into the system, on mine causing a fault on the AC controller showing 'high voltage on pin 31'. Much of the dash is also shared with a cayenne.
9th Slava Ukrani 💛💙 Absolutely delighted you got that sorted out... made my day.
Fair play for not just giving up and handing it back. I'm sure it will pay off for you and it has provided great content. Well done Gents..
Pure gold! Better than any Netflix show.
It has it all: drama, comedy, suspense... and no acting, just raw life unfolding in front of our own eyes
Great news on the bentley,look forward to all your videos on the channel,all your end products are 100% thank you Rob & Chris.
Thanks for keeping it real guys. The moment it turned over was so awesome. Can't wait for the next one.
Chris, you are a natural narrator/communicator. Right across the country, I bet this one made everyone's day.
Awesome, like the idea of a RobCam!! But understand how you work and that’s what makes it special!! Great update!!
Awesome! Lovely to see Robs big cheesy grin, hear the waffle, enthusiasm and genuine delight, and how nice of the Patricks to extend that kind of generosity, especially considering the current state of domestic and world affairs :-) Cheers.
Fantastic result looks like you have almost got that Bentley sorted. Ref the videos they are decent enough on your phone I always look forward to see what you are fixing. Thanks to you both.
Hi there lads, so good to see the progress and the wonderful help / assistance you have had from the different specialists to get this car engine running (if only for a moment or two!!) so now looking forwards to the next video / report. Keep smiling!!😄
So worth the wait I genuinely thought you'd move it on but I'm so glad you kept it and got it to a running state which is great once it's all done it'll be worth it. Looking forward to seeing it on the road it's literally Blenheim palace on wheels haha great work again lads
Absolutely Brilliant video and lessons learnt.
So much for the Specialist that came out and achieved nothing.
A Good Auto Electrician is the way to go and can't wait for the next video 👍
Westminster Salvage is awesome. I bought so many parts for my Arnage and Turbo R, Carl and I became friends! He shipped everything to the US. Highly recommended!
Fabulous progress. Loving the update and evident emotion. And the phone style videos are brilliant.
Perseverance wins the day. Well done to both of you for sticking with this.
Throughly enjoyed the videos boys! Was on tenter hooks waiting for it to start but the excitement in Robs voice when it did was epic!! Great job! Look forward to your next video… will see you there….In the next one!! 💕
The fact that you can get three videos of this high quality out every week and all filmed on your phone is amazing. Keep doing what you're doing lads.
I was going to ask my grandkids to email my on my Ipad when I’m gone, the answer to “what happened to the Bentley that Salvage Rebuilds were fixing?” I cant believe that circuit board could not be fixed by a competent electronics guy. Well done guys another enjoyable video.
Great video guys. I think you will get this one sorted out in short order and will be hopefully behind you soon. Thank you for caring so much about your viewers!!
I just love the fact that everyone else was beaten by this, even Bentley!! You kept going and its pretty much done
Iv'e been following you guys for a long time, you will not be beaten by anything at all. Always fantastic video's, well done guy's
I’m so happy for you guys to now know it runs! Just sucks about that ecm but hearing it run for a few seconds was quite the treat.
Well done guys, so pleased it’s moving forwards! Can’t wait for the next chapter….keep going, you’re nearly there!
Rob your enthusiasm and tenacity to get this lovely motor going is brilliant. Best of luck.
Glad to see you finally getting somewhere guys, I know that feeling having to wait wen someones that good at there job, keep up the good work and cant wait to see it finished 👍👍👍👍
The joy in your voice Rob, honest passion.
Fantastic result guys! Well worth the wait. Looking forward to seeing the final instalment.
Delighted to hear the good news on the Bentley . Love the vids , haven’t watched one yet that I didn’t enjoy . Great channel
Can't beleive you edit all this on your phone, it must have a huge memory! Patience pays off on this Bentley to get it fixed, looking forward to the outcome. Brilliant update as always, thank you.
Brilliant video Rob and Chris, love the big yes from you Rob and Chris just knows his stuff.
Congratulations…I been waiting since Christmas Eve for this so finish it off and keep us informed. It’s so exciting as I have been in this position so many times and know how it feels when you finally crack it.