Always happy to see an English title and surprise Indian guy actually speaking English. Thank you for making it 2 languages, this way the whole world benefits.
Some of the Lithium Ion cell phone batteries have a large white rectangle next to the terminals. What is the function of that rectangle? Example at or near 0:15
Thank you for your informative video. I have a question. If the original battery has 4 terminals and the replacement battery has 3 terminals, is there any problem using the 3 terminals battery?
I have a pair of true wireless earbuds and I lost it's charger. The earbuds have four terminals places like 🔢. Will they charge if I find the + terminal and the - terminal (2 terminals) out of 4 terminals and charge those two? Or do I also have to connect other two (BSI and BTEMP)?
Hello :) at first thanks for the video. I’m now working on my phone Wiko Tommy , to make a car info display while driving. That phone’s battery has three terminals. I hooked up positive and negative wires along with the Correct position but it does not work. By accidentally I hooked two ( positive with Btemp terminal) up ,surprising and unexpectedly it was on. So can I use like that one ? Positive cable to positive terminal and btemp, then negative cable to only negative terminal. Thank you :)
I want to replace my modem battery which standard old phone battery (square glat type) with 11650 type battery which has more capacity. Is it ok if i just connect + & - only? Is it still working if im not using BSI and BTemp? Thanks.
I want to put a laptop battery with 2 black and 2 red wires in a homemade boombox. Use the power adapter to charge it. Am I right to assume that the adapter doesn't have all the chips to know how much to charge? Meaning the chips which communicate with the battery might be on the motherboard of the laptop?
I have a pet project where i will need to charge a 12volts 10amp bike battery. I have a used mobile radio charger that i intend to use. The charger has 4 terminals: obviously +ve and -ve, then BSI and Btemp(much thanks for your video). I dont have a problem making the +ve and -ve connections to the battery for charging, however question is what should i do with BSI and Btemp terminals? Do you think i can connect them too to get the information they can give and how do i make such connections?
Thank you. I did not want to buy a new battery and decided to go with an external power source for a "sim card wifi hotspot". I measured the thermistor of a cold battery (8k Ohm). With the external power source i used a 7,5k Ohm resistor and it works like a regular battery 😉
So, on this phone I performed a Frankenstein battery swap(actually came out very good and clean) connect the thermister pin on phone to a 1/4 watt 7.5k resistor would stimulate having the original battery connected?
@@johnvanlandingham5730 In my case, i measured 8k Ohm on the Original battery. This, of course could be different for other battery's. You need to measure the resistor from the original battery first. Note, i am not responsible if something goes wrong on your side.. 😉 Be very careful !
Thank you. I am trying to repurpose a cell phone battery to run a analog FM radio. Now I know where the positive and negative terminals are it should be easy.
For who dont understand 4 terminal batteries, some brands like samsung, it has NFC built inside of the battery. Some have 3 because they only have: 5v, temputure sensor and ground (-). You can power on with 5v power supply but most of the times doesnt work because the phone detects an unknown power source without the temputure sensor attached to the middle pin. So most android and java phones will shut off and bootloops. So it kinda dangerous to the phone because the original battery has chips on top of the battery, so it protects the phone with overvoltage, undervoltage and overcurrency. So CHOOSE carefully with well-known battery manufactures like syrox. To fool the phone it connected to a battery; 1: remove your battery if its removable. 2A: buy an exact model of the battery. 2B: (TRY AT YOUR RISK) or get the original battery that has been inside of the phone. 3: get a multimeter and set it to the resistense mode 4: for checking the resistense of the battery, get the red metal end wire to the 5V section, put the ground the middle of terminal. 5: after checking, if the read shows a spesific number of resistense, get the exact resistense of resistor, example if it reads 8.25kOhms, get 8,25kOhms resistor. 6: check the reccomended voltage for the phone (usualy its 3,7 to 4,2V) 7A: get a power source that sets the voltage and current, set it on 4V, its middle of the baterry capacity, like 67%. 7B: chop an unused USB cable and remove the green and white wires, it usually for data transfer. remember we will gonna use the RED(5v) and BLACK(ground) for the phone. 7BA: connect to a 5w charging brick that can found everywhere on the house. DO NOT GET A POWERBRICK MORE THAN 5W SUPPORT, IT WILL GONNA FRY THE PHONE. 7BB: connect the 5V And ground pins to the phone. Set the adjustable power source to 4v. 8: Make sure that anything is not shorted, double check the wires its not touching to the other pins. 9: when you get a right resistor, twist its tiny legs to 5v pin and middle pin. DO NOT TWIST THE PHONE'S PINS, IT WILL GONNA BREAK. 10: now, make sure that your power source is plugged, try to turn on the phone. 11:if you turned on the phone sucsessfully, if you want to data transfer, get an sd card or a right cable to phone. Do your data transfer and youre done! Now your Batteriless phone is real. Do anything to it.
Brother i have a tablet which runs on 3000 mah battery which got damaged now i have two different cell phone batteries one is 1750 mah and other is 1800 mah so can i salder there positive and negative terminals to the tablet is it safe and would it work
Thanks this video was really helpful as i am making a charger for a small camcorder battery which also has three terminals and i didn't know if the third terminal was to do with charging or not.
Mobile- Gudevening. Can l start my moto w180 basic phone without battery? Some videos guide to connect data cable. Instead of data-cable can l use charger? (It has 4 terminals inside, so the confusion is where do the wires stick, 1st & 4th? Or some other combination) Pl reply.
Anyone know if there is 5 terminals whats the positve and negative terminals. or is there 2 complete circuits and one status terminal in the middle? Its a battery for a total station with a laser. 56wh lasts c 4hours. charges on 18v charger.
Excellent, just what I was looking for, but, I have a 6 wire batery, so far I know is 2 of them are red and the other 2 are black, I do believe that's all I have to know to recharging it, but I have a question, for recharging my battery, can I join the black therminals with each other and do the same with the red ones?
Sorry but its probably not the best idea. Batteries of those new generation tablet can be entirely different from what explained in the video. So it will be best if you do some research first.
i have battery xiaomi BM42 and i want build powerbank with that.. can you give me explanation about connecting the battery to pcb powerbank? because the battery have 4 terminal..
Thank you for not saying "Ok, Guys" in every sentence as I've heard in other videos. Your content is very good but repetitivly hearing that phrase makes me have bad dreams at night!
3 terminals can mean battery status indicator [BSI] or The the third terminal is a battery temperature indicator . but if it's got four terminals then it's a [Bsi ]Battery indicator and the a Battery temperature
Can I use another battery say a Samsung batteri which my phone require 3 terminals only but the battery I look for has 4 terminals? I guess it could be fine since the connector would only connect 3 out of 4. While the fourth terminal would just hit "wall". Should be fine right? Like a outlet who has plus and minus and perhaps 3rd that is GROUND and IF there was a 4th that would just be whatever like data to do say temperature sense, remote control etc. Thanks btw for the info. Didn't know what the ports what called, now I know: terminal!
how could the phone detect if the battery exists with only two poles. it is likely that suppose we already connected resister to mimic the temperature pin's characteristic. the phone still doesn't function (according to sereral verdicts in youtube).
If so, and I'm not saying it isn't: why is there no circuit to stop charging until the battery gets to a certain amount of discharge and start charging again?
Good video, thank you. But the terminals with samsung battery are arranged differently, they are from left edge to going to the right for instance, positive, blank, negative and then blank, why?
Great video!! With Quick and Simple explanations that any laymen could get as its not muddied up with a bunch of tech speak!!! While yes, your accent is heavy. I had Zero issues understanding you, thanks to years of dealing with customer service reps lol jk.
Im trying to find out how to do similar thing and trick the sensor but might ne hard those batteries cave like a little chip or motherboard that tells phone the nattery is good or same volatage what i dont know if how can it be tricked without battery.
Want to learn electronics the fun way?
Checkout my course: bit.ly/3E4qKt0 👈
Use discount code - ⭐ET20⭐ and get upto 20% off!👈
Hi what if the terminal for positive is broken or stops working pls help and now phone can't switch on
is there a way to recharge this battery nowdays with 2 pin recharge?
Can i use Redmi Note 4 batteries on Redmi Note 5? it has the same socket a.k.a it fits perfectly. I wonder if it has the same pin positions? Thank You
Bro please tell me can We use moto g71 Mobile battery in ke novo k8 plus Mobile ?
2:52 How about Samsung S5 battery? Is It same kind? Becose it has 4 pins but 1 has a plusmark and 3 a minusmark?
Always happy to see an English title and surprise Indian guy actually speaking English. Thank you for making it 2 languages, this way the whole world benefits.
Some of the Lithium Ion cell phone batteries have a large white rectangle next to the terminals. What is the function of that rectangle? Example at or near 0:15
Thank you for your informative video. I have a question. If the original battery has 4 terminals and the replacement battery has 3 terminals, is there any problem using the 3 terminals battery?
Lol that's the Great Scot music played over NCS
Ryt lol
Ye
Great tutorial. I didn’t know the role of the processor in charging. For prolonged battery life, Chargie USB stick is the real game changer.
great video... I got a quick clue about batteries having more than 2 terminals...Thanks bro.
I have a pair of true wireless earbuds and I lost it's charger. The earbuds have four terminals places like 🔢. Will they charge if I find the + terminal and the - terminal (2 terminals) out of 4 terminals and charge those two? Or do I also have to connect other two (BSI and BTEMP)?
I thought it would be to do with balance charging! Very interesting though! I suppose phone batteries are typically one cell.
Awesome video, just what I was looking for. Is there a way to tell which terminal is the BTEMP and which is the BSI?
Hello :) at first thanks for the video. I’m now working on my phone Wiko Tommy , to make a car info display while driving. That phone’s battery has three terminals. I hooked up positive and negative wires along with the Correct position but it does not work. By accidentally I hooked two ( positive with Btemp terminal) up ,surprising and unexpectedly it was on. So can I use like that one ? Positive cable to positive terminal and btemp, then negative cable to only negative terminal.
Thank you :)
Great question. Too bad it wasn't answered😕
I want to replace my modem battery which standard old phone battery (square glat type) with 11650 type battery which has more capacity. Is it ok if i just connect + & - only? Is it still working if im not using BSI and BTemp? Thanks.
I want to put a laptop battery with 2 black and 2 red wires in a homemade boombox. Use the power adapter to charge it.
Am I right to assume that the adapter doesn't have all the chips to know how much to charge? Meaning the chips which communicate with the battery might be on the motherboard of the laptop?
I have a pet project where i will need to charge a 12volts 10amp bike battery. I have a used mobile radio charger that i intend to use. The charger has 4 terminals: obviously +ve and -ve, then BSI and Btemp(much thanks for your video). I dont have a problem making the +ve and -ve connections to the battery for charging, however question is what should i do with BSI and Btemp terminals? Do you think i can connect them too to get the information they can give and how do i make such connections?
Thank you. I did not want to buy a new battery and decided to go with an external power source for a "sim card wifi hotspot". I measured the thermistor of a cold battery (8k Ohm). With the external power source i used a 7,5k Ohm resistor and it works like a regular battery 😉
So, on this phone I performed a Frankenstein battery swap(actually came out very good and clean) connect the thermister pin on phone to a 1/4 watt 7.5k resistor would stimulate having the original battery connected?
@@johnvanlandingham5730 In my case, i measured 8k Ohm on the Original battery. This, of course could be different for other battery's. You need to measure the resistor from the original battery first.
Note, i am not responsible if something goes wrong on your side.. 😉 Be very careful !
Thank you. I am trying to repurpose a cell phone battery to run a analog FM radio. Now I know where the positive and negative terminals are it should be easy.
Please Do a video of non removable phone battery terminals
that was very helpful , thank you sir , I subscribed to your channel , keep up the good work
Anyway to trick the bsi or btemp to think its conected even if you dont have original battery?
*So is it safe to use phone battery + and - pins as a replacement battery for simpler li-ion powered devices?*
For who dont understand 4 terminal batteries, some brands like samsung, it has NFC built inside of the battery. Some have 3 because they only have: 5v, temputure sensor and ground (-). You can power on with 5v power supply but most of the times doesnt work because the phone detects an unknown power source without the temputure sensor attached to the middle pin. So most android and java phones will shut off and bootloops. So it kinda dangerous to the phone because the original battery has chips on top of the battery, so it protects the phone with overvoltage, undervoltage and overcurrency. So CHOOSE carefully with well-known battery manufactures like syrox.
To fool the phone it connected to a battery;
1: remove your battery if its removable.
2A: buy an exact model of the battery.
2B: (TRY AT YOUR RISK) or get the original battery that has been inside of the phone.
3: get a multimeter and set it to the resistense mode
4: for checking the resistense of the battery, get the red metal end wire to the 5V section, put the ground the middle of terminal.
5: after checking, if the read shows a spesific number of resistense, get the exact resistense of resistor, example if it reads 8.25kOhms, get 8,25kOhms resistor.
6: check the reccomended voltage for the phone (usualy its 3,7 to 4,2V)
7A: get a power source that sets the voltage and current, set it on 4V, its middle of the baterry capacity, like 67%.
7B: chop an unused USB cable and remove the green and white wires, it usually for data transfer. remember we will gonna use the RED(5v) and BLACK(ground) for the phone.
7BA: connect to a 5w charging brick that can found everywhere on the house. DO NOT GET A POWERBRICK MORE THAN 5W SUPPORT, IT WILL GONNA FRY THE PHONE.
7BB: connect the 5V And ground pins to the phone. Set the adjustable power source to 4v.
8: Make sure that anything is not shorted, double check the wires its not touching to the other pins.
9: when you get a right resistor, twist its tiny legs to 5v pin and middle pin. DO NOT TWIST THE PHONE'S PINS, IT WILL GONNA BREAK.
10: now, make sure that your power source is plugged, try to turn on the phone.
11:if you turned on the phone sucsessfully, if you want to data transfer, get an sd card or a right cable to phone. Do your data transfer and youre done! Now your Batteriless phone is real. Do anything to it.
Amazing man. Thanks for the detailed explanation :)
Thank you. I never asked this.question until today
thanks for the share it's exactly what i needed to know quickly.
is it possible to bypass the battery and connect directly a psu or similar to the motherboard for testing it, in case of diagnostics on the mobo?
Awesome presentation. Great video. I studied back in the 80s. Love electronics.
Very Helpful, Thank you
Can I charge mobile battery by giving 5volts directly to the + & - pins from SMPS of my PC.
I've been wondering for a long time.
Brother i have a tablet which runs on 3000 mah battery which got damaged now i have two different cell phone batteries one is 1750 mah and other is 1800 mah so can i salder there positive and negative terminals to the tablet is it safe and would it work
Any info?
Mogul 6 terminal batteries ?
hi there "🙋
how to use 3 terminals battery for 4 terminals pins smartphone?
is any tips tricks or hack for it ?
thank you 🙌
Thank you sooo much.. quick and easy answers. 🤗
Thanks this video was really helpful as i am making a charger for a small camcorder battery which also has three terminals and i didn't know if the third terminal was to do with charging or not.
Mobile-
Gudevening. Can l start my moto w180 basic phone without battery? Some videos guide to connect data cable. Instead of data-cable can l use charger?
(It has 4 terminals inside, so the confusion is where do the wires stick, 1st & 4th? Or some other combination)
Pl reply.
Whats the video making software name?
Its Videoscribe
exellent i realy enjoyed your information
❤Thank you, no battery no phone usage.
Anyone know if there is 5 terminals whats the positve and negative terminals. or is there 2 complete circuits and one status terminal in the middle? Its a battery for a total station with a laser. 56wh lasts c 4hours. charges on 18v charger.
how do i charge direct a li-po polymer rechargeable with 3 wires, RED/black/ and white 3.7 volts 4100mAh
Battory Baki ke 2 terminals kese pata kare ke bsi he ya btemp he ?? Or mobile pcb pe bhi kese pata kare ki vo terminals konse he ???
Hi Sr !!!!
Can u guide me in to convert a mobile batry to power bnk
Mean i need construction advise
please note that some batteries have NFC circuit and they use one terminal for that
Super simple explanation thanks much!
This is great video
you are great sir,
Thanks bro, this video is very informative and knowledgeable
Probably greatest video for this theme, thank you for info 👍😄
Basi mins "id",or bst mens "thd"??in inbuilt battery...
Thanks brother Thankyou very much your video and AUDIO QUALITY SUPER
Well said....Thank you...
Excellent, just what I was looking for, but, I have a 6 wire batery, so far I know is 2 of them are red and the other 2 are black, I do believe that's all I have to know to recharging it, but I have a question, for recharging my battery, can I join the black therminals with each other and do the same with the red ones?
Cant say. What is the application of the battery?
@@THEELECTRONICGUY It is from an old tablet, pix I think?
Sorry but its probably not the best idea. Batteries of those new generation tablet can be entirely different from what explained in the video. So it will be best if you do some research first.
Places that mean if a cell phone battery has four connectors one of them is bsi?
Very useful video bro........
What is T & D points working almost in handycam batteries... Please make a video
I enjoyed your video. It was very helpful. Thank you!
I am glad you like it!
i have battery xiaomi BM42 and i want build powerbank with that.. can you give me explanation about connecting the battery to pcb powerbank? because the battery have 4 terminal..
Which terminals are for charging the battery, and what for the other two??? Please explain
Thank you for not saying "Ok, Guys" in every sentence as I've heard in other videos. Your content is very good but repetitivly hearing that phrase makes me have bad dreams at night!
3 terminals can mean battery status indicator [BSI]
or The the third terminal is a battery temperature indicator .
but if it's got four terminals then it's a [Bsi ]Battery indicator and the a Battery temperature
thank you
thank you friend all the best
Great info !
What's the c rating on cellphone batteries
Can I use another battery say a Samsung batteri which my phone require 3 terminals only but the battery I look for has 4 terminals?
I guess it could be fine since the connector would only connect 3 out of 4. While the fourth terminal would just hit "wall". Should be fine right? Like a outlet who has plus and minus and perhaps 3rd that is GROUND and IF there was a 4th that would just be whatever like data to do say temperature sense, remote control etc.
Thanks btw for the info. Didn't know what the ports what called, now I know: terminal!
great and simple thanks .
good explanation easy simple
great scott sound :), good video though!
Is great scott the producer of the intro music? 😳
What if the terminal for positive is broken solution pls cause phone cant switch on
Enlightening. Good Job.
nIce drawings too. Well done
What about NTC terminal ? 🤔
This information was very helpful to me. Thank you.
Good info keep it up
thank you for this imformation bro
how could the phone detect if the battery exists with only two poles. it is likely that suppose we already connected resister to mimic the temperature pin's characteristic. the phone still doesn't function (according to sereral verdicts in youtube).
or my question might be wht the phone bothers to detect the existance of battery as long as it can get the power from usb port.
*why*
So will a 3 terminal phone not work with 2 terminal batt?
Simple and clear explanation. Subscribed your channel. 👍👍
Can explain new battery like example like oneplus 3 battery which side negative/positive BSI Btemp,How to know which is which?
The bateries ive seen say where the positive and negative are other wise youll need those machines that detect electricity currents or something.
Realy informative vid thk u
Very informative
nice information...
Sirji superb
good video&editing also
So, why do I only get a few milivolts when I test (multimeter) a 100% charged 4 pin battery on the 1 and 4 pins. Or on any pins for that matter.
Thank you, Now I don't have to wonder anymore
Very informative, nice now I know, thank you.
If so, and I'm not saying it isn't: why is there no circuit to stop charging until the battery gets to a certain amount of discharge and start charging again?
Good video, thank you. But the terminals with samsung battery are arranged differently, they are from left edge to going to the right for instance, positive, blank, negative and then blank, why?
How to repair bsi smartphone battery
For Lg g5
How can how can 4 pin battery repair
…Very helpful!
Great video!! With Quick and Simple explanations that any laymen could get as its not muddied up with a bunch of tech speak!!! While yes, your accent is heavy. I had Zero issues understanding you, thanks to years of dealing with customer service reps lol jk.
:)
What happens if I don't connect bsi terminal of mobile battery to my project
Thnx a million for info
thanks for informed
Excellent video. thanks for the nice information.
Sir, please explain how I can use 3 pin battery in 4 pin portable mobile battery
Sushma Shakya solder some cables on the terminals idk
Im trying to find out how to do similar thing and trick the sensor but might ne hard those batteries cave like a little chip or motherboard that tells phone the nattery is good or same volatage what i dont know if how can it be tricked without battery.