True Reach-In-Cooler Not Cooling
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- Found an interesting one with this reach-in-cooler having weak suction valves in compressor, causing the pressure to slowly drop lower and lower. I appreciate everyone watching. Please consider liking video and subscribing.
![Megan Thee Stallion - Neva Play (feat. RM) [Official Video]](http://i.ytimg.com/vi/TpYTyAaTRts/mqdefault.jpg)
![Warhammer 40k: Space Marine 2 | เพื่อจักรพรรดิ ! [ตอนเดียวจบ]](http://i.ytimg.com/vi/4M0ckYMA4-U/mqdefault.jpg)
When your leak detector is worth more than the prep table 😂
When you upgrade to that style of drier, you need to add a little extra refrigerant. Sporlan has a chart for the amount the drier holds.
Yeah thats definitely good info to know. appreciate the feedback
@@HVACRSTRONJAY Btw good video.
Running kinda hot with the torch turn it down so you don't cook the joint.
I like my copper well done 😁
I had to fast forward could not watch it
He had it glowing cherry red with no nitro flowing
Cap tube was like dang man you killing me
Rookies whata do they think they know it all after a year of changing parts lol
When you see the frost on suction line at back the system is over charged. I think the old compressor has no problem.
When You opened the system if there’s no any or little gas in the system somewhere is leaking. Normally inside of the box at evaporator side. You will get callback after a couple of months for sure.
This was recorded in early 2020, so far they have had no issues but I see your point and appreciate the advice. 👍
I’m sorry but your leak check was not sufficient
30 years doing this you missed a leak
200 PSI would have found your leak trace gas with 404a as well
134a is hard to hit on 404 isn’t
I also think there was nothing wrong the compressor pulling over 4 amps and called it weak or bad valves doesn’t make sense
Don’t always trust tech support haven’t called them in years
You are young and cocky some day you will figure it all the mistakes over the years
How much would a repair like this cost ? Parts and labor combine
I didnt see any nitro, did you use any when u braze?
Why didnt new compressor require a capacitor ? What was the big notch indent on top of compressor for?
Nextech
Can you help me with my gdm-26? Fridge is 80 degrees, it was working well a couple of days ago. Fans and compressor all appear to be working.
Email me at hvacrnovice@gmail.com
@@HVACRSTRONJAY sent thanks
I wonder how much you charge for all these work!!??
usually just an arm and a leg
@@HVACRSTRONJAY can you give me ballpark figure...thx
Email me at hvacrnovice@gmail.com
are True coolers reliable?
I see alot of true coolers have issues but on the flip side they are usually easy to fix or not that expensive. But like all units its how much of a beating they get and if they get them tuned up regularly.
@@HVACRSTRONJAY like cleanign the dust off the coils or more tune up necessary?
100% If you take care of that true cooler it will take care of you.