I am installing this same CAI on my 06 Tahoe z71 5.3l flex. Thank you for this video its a big help. I have a question....did you experience any codes after installation?
Hi there. Thank you for watching our videos and we are glad that this video was able to assist you. As long as you follow the steps properly and disconnect the battery, you should not show a check engine light.
After completion since you have more air flow aren't you supposed to retune to compensate? Every place iI checked said you won't see much of a change unless you do.And what about that MAF sensor screen? it limits air flow.Just removing it gives a horsepower boost.
Gracias batalle pero lo instale lo encargue por internet pero yego sin instrucciones hasta la luz del chet inge se borro en una 2006 silverado gracias y bendiciones
I put the Spectre CAI on my 06 Chevy Silverado. Now its putting off codes.says its running lean and misfiring now...i threw the stock air induction away not knowing this could even happen
Garbage. I going back to factory, factory spend time,money.hours of development and everyone replaces the factory beast mode box with these pieces of str8 shittt...🥴I quess every one likes thier cup of coffee different 😆
I see that you have a long filter that is on the edge of the fender do you worry about water been suck in because is on the edge of the hood? Can you tell me please because I have the same long filter
I have a k/n one on mine and it is true about the rain but all I did was go to a shorter cone filter and that did the trick but going in through high water areas is a whole other story
Garbage. I going back to factory, factory spend time,money.hours of development and everyone replaces the factory beast mode box with these pieces of str8 shittt...🥴I quess every one likes thier cup of coffee different 😆
I feel more comfortable doing it myself gonna by one today was wondering if it was difficult not at all thanks alot💯👌
Thanks for this video!!! …Very simple and straight forward, without all of the extra “blah blah blah” …Made my install easier than expected. 💯
Do they trigger the check engine light. And dose it increases the horsepower
If you watched it all it increases it by 10
Mine triggered the light on my Escalade till i drove for 30 miles and turned it off and on again
I am installing this same CAI on my 06 Tahoe z71 5.3l flex. Thank you for this video its a big help. I have a question....did you experience any codes after installation?
Hi there. Thank you for watching our videos and we are glad that this video was able to assist you. As long as you follow the steps properly and disconnect the battery, you should not show a check engine light.
Does it set off the sensor though?
I just bought one for my 02 Z71 Chevy Suburban a few days ago... haven’t dropped it in yet, I was just making sure I do it right. Thanks.
After completion since you have more air flow aren't you supposed to retune to compensate? Every place iI checked said you won't see much of a change unless you do.And what about that MAF sensor screen? it limits air flow.Just removing it gives a horsepower boost.
I unplugged mine and am going to plug back in tomorrow causes it finally gets tuned but I ran it with the maf sensor unplugged and ran better
excellent video
Gracias batalle pero lo instale lo encargue por internet pero yego sin instrucciones hasta la luz del chet inge se borro en una 2006 silverado gracias y bendiciones
Notaste alguna diferencia con ese filtro?
I bought an intake for my 03 tahoe 5.3L, but never got around to installing it. Now I have a 2006 Yukon denali with 6.0L, will this intake fit?
Absolutely
Thank you for the great information. Well done!
Thanks for the help!!
Thank you so much!!
Yo lo que Hice fue cambiar al sensor más adelante luego luego en la entrada y funciona mucho mejor
Do you happen to still have the link since it says it’s blocked for harmful
How much does this help with the mpg
I put the Spectre CAI on my 06 Chevy Silverado. Now its putting off codes.says its running lean and misfiring now...i threw the stock air induction away not knowing this could even happen
your air to fuel ratio is off, you need to get it tuned.
Garbage.
I going back to factory, factory spend time,money.hours of development and everyone replaces the factory beast mode box with these pieces of str8 shittt...🥴I quess every one likes thier cup of coffee different 😆
I see that you have a long filter that is on the edge of the fender do you worry about water been suck in because is on the edge of the hood? Can you tell me please because I have the same long filter
have you had any problems with it? thinking about getting it
Do you have to disconnect the negative terminal
Yes. As stated at the beginning of our video you would need to disconnect the negative battery terminal.
@@AJPDistributor what happens if you don't
@@Bigred-pz5hi You get fried my guy
@@bryanrios8199 like for real
Did you forget to disconect it?
U should put a close up of pulling the sensor off
Why? It's. Straight forward. Easy as changing your panties
Anyone else have issues getting the intake off of the throttle body?
Warm up your engine first
Forgot to take the negative terminal off what can happen?
Might throw a code at you
Mass air sensor assembly has a screen that restricts air flow and should be removed
Once removed it gives a horsepower boost also so it isnt just the kit that boosts it.The maf screen actually is an air restrictor.
@@larrynew7258 Cold air intake is suppose to lower intake restrictions, so that screen is a great restriction, why is it there?
I think your power gain numbers are off. Like by a lot...
V6??
DID IT DO ANY DIFFERENCE
Jesus Elias not much most likely
@kopfgeldjagar what about sound?
Man u jamming huh
Having the radiator hose touching the I take is the dumbest shit ever it's literally a hot air intake
Using insulation would be ideal 👌
Good luck when it rain!
Y
Because some of the filter being right under the gap between the hood and the fender. Rain gets in between there, especially hard rain.
I have a k/n one on mine and it is true about the rain but all I did was go to a shorter cone filter and that did the trick but going in through high water areas is a whole other story
Garbage.
I going back to factory, factory spend time,money.hours of development and everyone replaces the factory beast mode box with these pieces of str8 shittt...🥴I quess every one likes thier cup of coffee different 😆