วีดีโอ

I was just given one of them because I bitched so much about the keyboard on a cell phone. I hate cell phones. My fingers are too big or I'm not smart enough to hit dead center. The Bauhn works but it just another thing to have to carry. I've got a real keyboard on my desktop.

I just bought this from Walmart and most of the cords in this video were not included. Can you tell me what power cord it uses?

did you upgrade the power supply? what wattage and model is your power supply? thanks

well, mine is windows 11 pro tho

hey um you should check the Audiocrazy AC-RC89BT (ASIN B09Q5YG83D) boombox it's surprisingly good

DEAR SIR WHAT CAN I DO WHEN HP EliteDesk 705 G4I built it in the HP AMD Radeon RX560 4GB gives 3 long white beeps after 4 shorts red beeps when turned on,Thank you very much for your reply !!!!

Usually those pulleys are made of brass not copper. Traditionally heavier pulleys have been used to stabilize the speed ad and wow and flutter.

Can someone confirm which HP power supply you need to turn this on? I know the 65 watt standard one doesn't work, Just got a 120 watt in the mail, thinking I need to get the 150 watt is the hot ticket?... Thank you. 3 long beeps, 4 short beeps tells me its a power issue. Cheers! thank you

i have a HP elitedesk 705 g3 mini, will it support the discrete graphic upgrade?

I like this video, have a simular setup. Have a Dell 5070 extended with a AMD 6400LP. Surprised its runs so well, tested it with some gaming. Didnt expect a j5005 to be able to game with 10 wat tdp and only 8 pcie 2.0 lanes and 45 watts for the gpu.

Not cleaning that greenboard under the hdmi card hurt my feelings.

Great choice in dvd lost in space the original series I have 2 Portable dvd players the first one dates back to 2003 a ventura brand looks as new as when I bought it 21 years ago the screen is only small but it does the job ideal for camping I'm so glad they are still making them because I still buy dvds I have hundreds of them

What's happened with storage 😢

Interesting tool! Its been a while since I cleaned my mechanical keyboard, so its probably time to remove the key caps and give them a good wash! Thanks for the video!

Very calming voice, congratulations

Watching YT at 3am. “Metal flywheel in a cassette tape player”

After dropping spectrum and going with T-Mobile's I bought a third-party Gateway which makes a huge difference plus with an external antenna I went back to Spectrum because there was offering a really great deal getting a gig of speed for 55 a month but as some people experience with Spectrum there's always an issue following month they jumped it to 65 a month am I supposed to be guaranteed for 2 years yes I can call and complain however it would just be a never-ending story like it has been in the past an inconsistent speeds just as much as T-Mobile and if you have a good router you can use no IP with T-Mobile and you don't have to worry about your devices not working properly when it comes to connecting

Thanks for the info on the Fiio! I'm new to collecting cassette tapes/players, how did you copy from a CD to a cassette?

Do you think this will work with Fedora/Ubuntu?

Best short I have ever seen.

Probably better off with a EGPU connected via oculink.

The manual mentioned a blue light. It doesn’t happen. Having trouble pairing.

You can update this to Win 11. I have 3 of there units and just recently installed Win 11 on one of them without a problem. On another note - I have the 35W versions and I was having issues with 2 of them where the fan right from the start spins up to max RPM and stays like that forever. It becomes terribly noisy at that point. The only workaround is to remove CMOS battery, then fans behave normally then, but only until you have the device connected to power, after disconnection the problem returns. The problem is known and described over the internet as well. I was wondering - have you ever encountered this? Can you also post what RAM modules you have?

does this work with an IPAD? that's what I bought it for LOL

Very helpful, my keyboard do not have charging hole, but if you open the side a bit you can see the port, i guess is factory flaw.

Nice!

hello I have a 705 G5 model will this modification work? G4 looks the same inside there is also a connector. But won't the bios block the start?

It took me two days and I sent it back

i love the g1-g4 market on ebay for these things, one day ill eventually buy one for batocera or somthing for fun, thanks for the upload.

I have an HP EliteDesk 705 G4 SFF, can I play games on it? 8GB RAM, A10-9700 CPU

At the start of 2021 I wanted to get a new turntable . I still have my current and only champion of all my turntables since January 1983, a Technics SL-B10. It’s been a lifelong companion. Nevertheless I’d had my eye on inexpensive ones and the C3 from Crosley caught my attention with its design. I got one at the start of the year. Out of the box I felt dubious about it. It was supposed to be brand new but it appeared to possibly be a return. Just something about the packaging. Anyway I was happy to have one to try out finally. One thing, the plinth is pretty solid. The arm and controls were disappointing in quality but functional. The C3 setup is the way most basic AT3600L systems are these days. Mine had issues the I eventually fixed after going further down the Crosley rabbit hole of fixing issues. The counterweight was the first difficulty to over come and it was never working right until the last year of the C3's life. It’s a solid piece. Moreover it's trouble is the way it’s attached to the arm. The part that holds it on is very flimsy or bendable to enable the counterweight to screw into place. It never worked right. I had to somewhat force the counterweight on and guestimate where the correct weight would be and then check it with an electronic scale. A I generally maintained it that way until perhaps over two years after buying it. At some point last year I was able to fix the part holds the counterweight in place to work right. I thought the sound was great after it was all setup. I've been a P-Mount listener for most of my adult life. I like the difference in sound of the AT3600L in comparison or to just change it up. The auto stop worked perfectly on most albums but there are quite a few longer sides that cutoff before the end. At some point it started triggering early and that was another side door I fell into finally fixing. The speed out of the box was too fast 33.7 plus and 46.02. Ok for non-critical listening but I can tell the difference. Again I toyed with the speed controls on and off for the same amount of time I did on the other stuff before I got it exact and/or within 2% of its exact speed. I had various stylus’s on it. The original factory conical and then I bought the LP Tunes elliptical version. Then an AT conical to play with. The LP Tunes one is a bit quieter in my experience. The motor was pretty decent to my ears. It seemed to get quieter as time went by. It was a daily driver for a time but I still have my Technics from 1983 fully maintained but the C3 was aesthetically pleasing in my view and to play records on. A little over a month ago the C3 went kaput. IDK why but everything on it was working great and then the AutoStart started going out again and then one day I went to play a record. Turned it on and it spun up and died. I checked everything including power but I’ve had enough of working on it. It was geeky fun at times in the 3 and half years I used it. It was dependable to play some records on. When it was right. That's my C3 story. I only wish it was still working as part of my rig. I eventually may get something better/different.

I wanted to see this for a long time

Test with Batocera

Hi HWN like the channel and it’s name. I just received mine on Friday to replace a Crosley C3 that gave up the ghost. I’ve got some remarks for your C3 video after I address the Mykesonic. Right out of the box setup went well. Everything appeared within spec but my first concern before the unit arrived was the pitch/speed. I’d read on an Amazon review that the adjustments were outside the unit. Since viewing all the pics available of it, it appears there are no adjustment controls. I assumed they were in the usual spot with holes on the bottom. Turned out not to be true upon arrival. Anyhow, mine works great except 33 setting is 33.61-33.71 and 45 setting is worse at 46.88. I’m teetering on sending it back and going with other units that I know I can adjust easier with a jewelers driver. After examining the underside I might be able to take the bottom panel off to be able to adjust the speed but I don’t know that for sure and I kinda hate opening it up right now being new with whatever warranty. I’m currently running it on 45 by itself thinking maybe it’ll burn in I’ll check it in a few hours. Doubtful it’ll help. I’m curious if you had opened up yours at all? Before I saw your video, I saw the VWestlife video which he did take it apart and you can see where the holes are on the motor but he completely disassembled his for further examination. I’m not gonna go that deep. I was hoping somebody might be able to tell me if I take that panel off the bottom if it’ll help? It almost looks like you have to take it out of the frame. I can’t tell without diving in. I sent a question to him, but he’s a busy guy, as we all are so I wasn’t expecting an answer overnight. Thank you so much for your videos. I’m a subscriber now. Looking forward to some more and exploring your channel and I’ll have some comments for the C3 one lol.

Have had T-Mobile internet for over a year now. No issue whatever. Live near San Antonio Texas in the Hill Country. I would of asked for a new box to make sure that was not the issue. When we had a land line service, if lighting struck near by it would fry the box. Husband and I Zoom and stream at the same time, have 2 cell phones, 2 laptops and a desk top. Had way more problems with our land line and way more expensive. Being grandfathered in with T-Mobile for $50 a month has been worth it for us as other service companies raise prices.

I would like to see the compressed air duster, is it as strong as a can or air or just for of hot air?

I got sick & tired of hearing "go ahead"after less thzan 5 minutes

Lenovo M720Q is better. You can use a standard Graficcard. I use a M910X with i9-9900T and a RTX A2000 with 64gb RAM and 4TB NVME with BazziteOS and PS5 Controller.

Did you exchange the standard power supply?

What's your USB's file system? Mine cant seem to be detected by the projector.

I initially installed T-mobile in February 2024, spent hours, and got download speeds of .4 mb/s and nothing would load, defective gateway, and returned it, got last years model, 2023 but never got around to crawling under my desk and again attaching everything as Frontier after 2 weeks of no internet service finally came back on, then immediately the phone went out for 2 weeks. Note: although you get 2 weeks to try it out T-mobile, that two weeks starts the moment they ship the gateway to you and if you put in 12 hour work days, and do not install it immediately, you may get a week or less to try it out. Since Frontier here in Los Angeles county, again is currently having an area wide crash now estimated to be 3 days or more before they can get the internet back up again, I installed the new old stock T-Moble 2023 model, initially got 125 mg/s but then it soon came down to around 40 mb/s, still better then Frontier's 6 mb/s, yet nothing would download at all on multiple different web sites, even after waiting about 2 minutes to download. Garbage. Now, throughout the day, the internet speed varies between 36-70 mb/s, still much better than Frontier, but I ran a test in the initially late morning, and speeds varied between 70 and 124 mb/s, and thus all over the place. I will wait a few days to see if any firmware is downloaded to the gateway, and whether that may make a difference, but when there is an almost 3 1/2 fold speed difference throughout the day, that is problematic. Down the street on the same street, Frontier fiber optic is extremely fast, but on my end of the street, no fiber optic is available, now for many years, nothing planned and it truly sucks, and, the internet speed has decreased by 10% over the last 6 months from Frontier. Internet access is very variable depending on location from street to street. By the way, the cable truck is frequently seen in my neighborhood due to problems. Just saying.

Not worth it if you don't live in the USA. The shipping is as much as the card itself..

Useless gimmick product

I see Davinci Resolve, i click like

Does it support displaylink driver? Please reply

if you find the battery life, can you share that info. on the instruction manual it says 1-3.5 hours and it takes up to 4 hours to charge, which doesn't look right. not sure if it is a typo on the manual.

Another important thing to consider is the top bezel cover. I bought a 705 g4 with the 2400GE with the goal of doing this. However, my unit came with a solid top. For optimum ventalation, you should try finding one of the mesh tops that are on the 65 or 90w models. The tops from the 800 g4s will work, but if it's not a g4, don't bother. It won't fit.

Not sure if it's been said, I'm to lazy to read through the comments, but if you do this, make sure you buy the 150W power supply, the 65W isn't gonna cut it. Also.... getting Linux running on this particular machine was a HUGE pain. so if you don't know much about it, stick to windows.