วีดีโอ

Amazingly helpful

Must be somewhat irksome to have drilled those two large holes into the Dishy housing when the newer versions of the app allow dish horizontal configuration via software. But no harm done and it working is the important part.

Oh wow, that escalated quickly ;) But we feel your pain. Our ASM hasn't had time yet to throw some really good surprises & plot twists our way (I'm sure they'll happen when we sail her from Samos to the Netherlands in a few months!) but we're both long time liveaboards, each on our own sailboats until recently, so we know what it's like sometimes ... Just wanted to say we very much appreciate you sharing all your experiences - including when it doesn't go as planned. We can all learn a lot from each other this way! 🤗

We did this on a berth to repair a damaged forestay and extend the foil that a PO had cut down due to elongated holes at the motor end. Can't imagine doing this at anchor or on a mooring!

fkuk youre lucky the stick never fell ontop of you!

Buen trabajo Woody . siempre se complica algo al final !!!!! Un gran saludo a la Capitana Irenka y los niños desde Argentina !!!

Caw strewth Woody. It deflates my yachting ego when I watch your maintenance vids and depression sets in. They should be X rated 🤪

wouldn't a gyroscope eliminate the rolling and pitching?

Very well done and good shots...thanks sooooo much

Sexy overalls guys what a palava 😮

Hey Woody, is the turbo and exhaust elbow ok to be done in isolation of the heat exchanger and oil cooler? Presume space a little tight but just need to drop the exhaust box hose?

It's a schitshow of an Idea, this

Did the engine speed go up after cleaning the turbine carbon? Does it emit black smoke when the turbine is running at high speed because of the carbon buildup? My boat has similar problem.

Saved my day and sanity with my black water waste problem...THANK YOU FOR POSTING THIS VIDEO

Great video! Thanks for sharing. Quick question: the Quick 1200w Heating Element F/B3 comes with two gaskets. One is larger and flat, and the other is round and smaller in diameter. Do you use both gaskets or just the larger flat gasket for model B3 40L?

Enjoyed a real hands on... however would it not be simpler to just shit in a 5 gal bucket? Asking for a friend

Very good and clear explanation. Thank you, I will now do the same with mine. Fair winds!

That charger is now 3800!

liked you're fiber glass work ( :

Thanks for that ours is leaking the same but now I am thinking we gotta clean the whole thing instead of just replacing a washer 🙄

Well done

Danke, das war sehr hilfreich. Liebe Grüße aus Germany, Ela& Frank.🙋‍♀️🙋🏻‍♂️

Man, I thought rv maintenance was an ordeal!

Well done. Very easy to understand explanations.

Hi again, I notice you have anodes on your rudder? I’ve never seen this on any other Super Maramu’s? Usually just the 2 anodes on the rudder as the keel is connected to those via the bonding strap in the bilge.

Hi Woody, can I ask is there a reason why you shortened the pole from the end that takes the sheet, rather than the end that connects to the smaller jokey pole?

I have this same job to do, but forward where the eye bolt is for attaching the block to where the pole fore-guy connects. Would you say that G10 board I’d strong enough to tap and the bolt hold there?

Thanks!

Thank you. I’ve just bought a new me boat and there is a 25lt version to check over.

Please tell us you did not use welding cable. They are NOT suitable for marine use

Thank you!

Buy a new toilet???

Many thanks. I'm just about to go through this whole process and found your video. I feel a lot more confident doing this now. Cheers from Sweden 👍

Thanks!

The 3 pole 40 amp circuit breaker you put in between the AC Outlet on your inverter & the load, was it a AC or DC circuit breaker?

Woody, arent there big cable exiting the engine room at the floor and mid way up by the filter? But, then they are all in the cabin step... how do they come together? I am trying to route the WS500 cables and am afraid of hitting one of those big cables.

FYI the type of thermometer you used to check the thermostat cannot give accurate readings of liquids or wet/shiny objects.

Buenos días Cuando se monte manguitos o tubos de goma tanto de toma agua salada o dulce, sobre hierro de fundición o aluminios debe de ponerse grasa en las toma de agua y así conseguimos no se sulfate o oxide los materiales, no debe de hacerse en tuberías de presión superior a 3atm

Best video on TH-cam showing cambelt change on Volvo MD22, Volvo TMD22 / Perkins Prima. Thanks very much for uploading this video. Also good to see it done without any special tools / good mechanic.

BUEN TRABAJO CAPITAN SALUDOS DESDE LATITUD 34 S. ARGENTINA Y BUENA PROA !!!

We kept our old water lock from our Onan generator! Just in case anyone wanted one!!

So much extra work due to a simple seacock mistake. I hope it works out in the long run

Thank you, great video, but I find the language difficult. I hope that if you have time in the future, you will bring these elements above the long one, how they are connected to each other and their role in cooling. I am weak in English.

Ka-Ching. More money 😮

hello mate from the other part of the world :) some suggestions from me :) 1 make another sea cock to have the genset separated and easily used for the main engine in case of emergency ;) 2 see if you can manage to rig that stop solenoid to the alarm system as this could have been easily avoided , that onan is equipped with 3 shut down alarms, low oil pressure , high coolant temp and high exhaust temperature, these only work if the system is connected to a functional shut off solenoid :) if that is not possible to fix or too expensive (ask me how I know ) you can always order a temperature gauge with alarm and install one on the exhaust and another on the engine coolant , whilst you are at it an oil pressure alarm and its all set , sure you can find on ebay or aliexpress etc , keep it up and if you need you know where to reach out :) fair winds and say hi to all :)

Easy error to make. I've done something similar and now always hang a key or a tag on the start switch when I do anything to the engine so I know to check everything before just mindlessly starting it. It doesn't always work with new people who might not realize what the tag/key means but at least you will get a bit of a reminder. It's saved me from having to McGyver in remote locations (which you are exceedingly good at). Glad you got it sorted out and that you didn't have to dive in Salty infested waters to find that adapter!

GRAN TRABAJO WOODY !!!! MUY BUEN VIDEO !!! TE MANDO UN GRAN SALUDO DESDE ARGENTINA

The only issue to be aware of, and I am sure you would know this is condensation on the outside of the freezer when in warmer climates, they just don’t have the amount if insulation that your old fridge did.

Para tornillos se caen muchas veces y no se pueden sujetar para colocarlos, tener plastilina, se utiliza en manualidades de los niños, no arcilla

Thanks!