วีดีโอ

Hi just done my Honda st1100 slave rebuid , seals new spring , put piston back into slave cylinder housing , tiny bit of break fluid rubbed around both inside & outer piston , but does not spring back can just keep pushing until all the way down any ideas what's wrong please?

Bought one a few weeks ago on sale for $62. I like it.

I have a Central Forge 5 inch that lives on my trailer for the past 8 years and I have mounted a Harbor Freight mini tire changer on it when I needed to. I have actually beat the living stink out of it. It started off a blue color but it now has several different colors on it. I use the anvil quite a bit and have cranked on the tighten handle with a cheater bar if and when necessary. I finally lubed on it yesterday and it is much smoother. It serves the purpose for now, and it lives a rough life and so far has taken all the abuse I can throw at it. I do plan to purchase the DOYLE 4.5 inch soon for an indoor work bench vice.

Where did you go?

SOLD!!!! $20 RN for "Insiders" Ill grab 5 of'em 😝

I just got mine running. I have the same bike. Found your channel from the V4 forum.

I live in Chandler, AZ, just southeast of Phoenix. I have a bought new 1997 Kawasaki Vulcan 750 with 118,000 miles on it, been all over the country on it, had to pull the engine out once to replace the stator, and replace the defective automatic cam chain tensioners with aftermarket manual cam chain tensioners, otherwise no significant issues. Been to the Grand Canyon about 20 times. 90 degrees is a bit warm for me. It's tolerable but not comfortable. To me winter is riding season in AZ. I'd rather ride in 30 degrees that 115 degrees. I don't ride with a windshield. I tried it a few times decades ago, and gave up. They caused severe helmet buffeting, and I just didn't like trying to look through a dirty bug splattered piece of plastic, since my face shield was also dirty and bug splattered. Made it hard to see. I usually just stay in the right lane and around 65. I ride to relax. The cops will give you a speeding ticket until they meet their quota, then they usually don't care. Lots of fast food choices at Camp Verde.

your a G. Keep doing you. thanks for the information. I have the same bike.

Hello Ser, good video about this kit, I just bought m12 3/8 stubby and I want to buy a complete kit, do you recommend this 80-piece Sunex, I have read good things about it.

Nice bike , I have e 1986 v45, love her!! 5k original miles

Why yellow? You have dewalt tools?

I'm about to buy one like this. Looks really handy.

I just bought a 87 honda shadow vt1100 lol and its February 😅 in canada 🇨🇦 These video give me a sense of what i can expect! Cant wait to get driving it

I just picked the Lowest tier 5” multi purpose vise, Now it is Called Central Machinery and it is Grey, but it has 3 feet. Says it in the instructions… Identical to this one. I feel stoked about it, it has very little slop. I did find metal shavings in the Groove that just needed to be pulled out. Not in the way of the threads.

I have a 07 shadow 1100 and mine has 7k miles 70k is just too much I know they run forever but still way to many miles for me

Good video.

I've also revived my new to me 1983 Magna V45 in the summer/fall last year, 0 experience with bikes but lots with late 90's and newer cars. I needed to do a bit of everything, including valve adjustment and I'm surely going to be needing a better condition head sooner or later, she's a little rough. Oh well, first bike and I've made her run quite well!

Just bought one, 86 V45. Found your video to be Very informative and good luck with your Machine, there Great!!!

I noticed there's no fuel gage?? 😮

I went to harbor freight yesterday intending to buy my first cordless ratchet, the quarter inch extended reach. When I picked them up, I was surprised how much heavier and unbalanced the extended reach felt. I went with the standard length, can always buy an extended one later if I need the reach that often. They had a free 2Ahr battery deal going with the ratchet. I also bought the 20 volt impact driver kit which came with a charger and 2Ahr battery plus an additional 2.5Ahr battery for $98.

One important thing missed was that the Clutch fluid line banjo bolts are supposed to be torqued to 25 to 35 nm which is 18 to 25 ft-lbs. This is per the Haynes reference manual for 1982 to 1988 V45 to V65 Magnas and Sabres page 2-9 Also, I believe you've confused the gasket that you replaced as the issue for the cause of the leak. There should have been no fluid in that area where the gasket is. That's only where the piston presses against the push rod. If you had fluid inside there, then the leak was caused by the piston seals being bad. You needed to replace the piston seals and to do that you needed to get the piston removed to get access to the piston seals for replacement. This information is described on page 2-30 of the Haynes manual for the 1982 to 1988 Magnas and Sabres.

John's helmet!

BLAH BLAH BLAAAAAAHHHHHH!

Dope just got one of these a little "methed Up" but it was $300 hahah planing on fixin over this winter

Mine started make this sound since added new oils. Have to check valve cleance etc.

i found that the swwet spot on my 2000 1100 is around 75. seems to level off and run smooth at that speed

I bought the Hercules Extended ratchet. Was having trouble reaching a bolt on my Harley that was hard on my old hands and wrist. Worked great. I have no problems with Harbor Freight tools.

So, what was it?

I disagree I bought the same one ,after a year of very little use it will not open or close, they only warranty them for 90 days so if brake after that it your baby, I will never buy a another vice from Harbor freight. I guess you what you pay for or do you I didn't?

Do you think I'm better off with the quarter inch or the 3/8 on the Hercules

You didn't mentioned on the video...that they are (Lifetime warranty...!)

I have a 2002 with 27,000 awesome bike I have the mustang seat could ride it across the country and your rear end would never be sore your arms get fatigued but nothing else

Hope I have luck with them just bought them have you broke one yet

Have you had pretty good luck with them? No deformation or welds popping loose? Just got mine and can't wait to get that access if you got a hidden oil filter. Wish i had these on that day for my classic Nissan. I could get the tips of 3 fingers on the end of the filter only. Wow. You got a power-troll. 😂 He definitely said his piece. (POS)😅 sadly these are on clearance. I wonder what they are planning. Im lucky i got the last pack.

I feel like the battery on the harbor freight one would get in the way with that square battery vs the milwaukee or the new hypertough ratchets from walmart.

Those new hypertough ratchets from walmart are also hard to beat for the money. 40 bucks for the short one and 60 bucks for the long reach version with charger and battery for both versions pretty solid quality feel also.

If there is air in the high point by the master , just have a buddy help tip the bike to the right , away from the kickstand, pump the clutch a few times and it should work its way to the resovoir. No need to bleed it out by the banjo bolt . Enjoyed the vidoe , found during my frustrations this afternoon !

COCK GUNS!!!!

I have the same design but Irwin record and it's amazing quality and I was lucky, got it from eBay new one for £70

Hercules ratchets rocks but the extended vs standard cancel each other out... Choose your poison wisely...

My exact bike ~ 2005 Shadow Spirit... Great video thank you for posting your journey! M.

The video was going well .... Until you mentioned you ride a Harley lol

I’m down in Saginaw If you wanna ride this summer Lemmie know!

I broke 2 13 mm but i dont know how to get the warranty on tham but the 13 mm the gear broke on me

Just glad you didn’t knock your beer over.

What do you use for a rust proof coating?

I’m thinking about getting two of these to put on top of the auger housing on my snowblower. Do you think it will hold?

Both are made in CHINA so does it matter ? both good I'm sure. Great video.

I know the quick wood clamps are garbage.

I know the quick wood clamps are garbage.