วีดีโอ

I wish I saw this before I spent three hours trying to get my 54" sweeper assembled. Turned out I had that first bar on backward. Once I had it together and stored away, I then find this video. The sweeper works as advertised.

Ensuring tire pressure is within spec (or at leas the same left to right) is actually step 1 ;) Also, because the adjustment points aren't on the very outside of the deck, moving one changes the other. Some back and forth is required for all but the tiniest adjustments.

Will this work on x350

would help if you showed changing the actual belt. pointless video

Thank you so much. Killed it dude!

How about my old LA 115? Please.

Great video!!! Very glad to have found this channel. The instructions and closeup shots are excellent.

You don't mention the holes to start the line and hooks to hold it are specifically designated 0.95. But wait, I thought I was supposed to rotate the head such that it stays in place under spring tension before putting the cap on. You seem to hold it down and then put the cap on to avoid it spring out. Not sure which is the right way to do it.

You are the man!

Thank you so much! John Deere needs to contract you to produce more of these handy how-to videos.

Tl 155

How do you remove the very back of the seat not just the seat but the bottom half

How much is for bagger system for a 100 42' deck

Thank u, thank u so much almost half greece spent (tube) until ur video made it clear

Video great explanation and very helpful saves me tons of money

Thank you for the video. Blessings to you.

I do not think this video could be better. You earned two subscribers.

I hope someone didn't ask this in the previous 50 comments (no way to search when there are so many comments?) I removed a drive in (press in) grease fitting. Concerned that the hole is now larger than the original from pulling it out. Should I replace with another press-in or drive-in fitting? Seems to me that they would make self-threading fittings that would cut into the existing press in hole for a better install. I could only find 1/4-28 thread cutting zerk (grease) fittings. These are too small and don't bite into the hole for a press in. Have you ever heard of 5/16 "thread cutting" fittings? I can't seem to find any. Please let me know if I should just use 5/16 drive in fitting to replace. Thank you!

Looking for Release lever on a JD Z520A Estate 60 ... Any Help Please

Do the drive in fittings have all the same size end that gets driven in?

Great,,precise video with clear video imagining.

It is okay to use Stabil stabilizer for daily fuel refills for the X380? Also, should I use the Stabil Storage or the 360 one?

I just installed the step today. I had my share of problems getting the holes to line up like the people commenting below, as in I could not get them to budge. Thinking about the problem, it seemed to me the problem is that you are fighting the weight of the deck pulling on the frame. I have a Z330R, brand new so I might not be doing it right, but I was unable to get the deck lowered all the way to the ground...close but not all the way. So I used 2 - 15" cabinet lifting jacks that I have to lift the deck to take the pressure off the frame. With the deck raised, I was able to slide the frame almost effortlessly to get the holes lined up. I hope this helps.

So…it appeared you measured the rake using the side blade by rotating the blade another 90 degrees so the tip is pointing toward the front of the deck. Is that correct?

Can you show how to install a bumper guard for a John Deere LT155 series? Thanks for your consideration.

You gave me exactly what I needed thank you for explaining everything I got just what you had to work on show me how to do it I appreciate it

How about to showing the clips. Your hand was covering it.

Thank you, I lost the key and was frwaking out thinking it was going to be expensive. 😅 the ignition is only $14.99 on Amazon. A 10 year old can change this thing. Lol tha ks gor the video.

Please Need Video On S240 48" 2023 Transmission Belt All Other Models , But This Particular One

Very good video. Simple and to the point.

I just subscribed to your channel. Yesterday I bought a 2024 JD Z320R from my local Dealer. I plan to mow today with it! Thanks for the video on the mulching kit. I think I will call my dealer and pick one up. So my understanding is that the kit comes with the mulching blades. You didn’t discuss this in your video so maybe I am wrong. Should I also install the mulching blades? Again thank you so much for your videos! You do a great job. My JD salesman said he also followed you! I mentioned you to him. Thanks!

Can I get the part number for that socket you used for the oil filter?

Unfortunately My X350 deck is different.. This vid did not have the same pulley arrangement for my yellow 48" deck.

This is not intuitive on the S140 48inch mulch deck... there are no match holes as you demonstrated on the 42inch deck. Very confusing.

Thanks. I gotta go buy another plastic panel tomorrow. Perhaps we should loosen the bolt in retrospect.

Nice job, thanks.

Very well done videos..Thanks

Thank you! great video that was a big help agree with others not sure I would have got it done first time without Video instructions are very general and lacking the details you cover.

hi, the left motion control lever is stiffer than the right side when you move them from forward to reverse positions, kind of like it is dampened . Is this an indicatation of trouble. How to fix this ?

Great video, but you might want to let people know which way to turn the nuts for raising and lowering the deck.

Nice video helpful only one issue I had is there is a spacer that goes on top of the pulley it fell out when taking apart. Your video has no mention of the spacer. My mower is a z530 r. Thanks good quality video

They make one for the x390 anymore?

$175.00 shipping for a 32 oz bottle?😂 GTFOH. Does Biden run your corrupt company?

cap style oil filter wrench, which one works with the 330r?

Tried to find it on your website and it doesn't come up on any search. Please update video or website

Which bumper will work for my 2023 z720e - BUC10163 or AUC12164 Thank you

What size belt is this? I got the M169500 which seems to be the belt online but it doesn’t work.

I have to check my 350, it seems to mow nice but alot of adjustment threads stick down, and that's where the problem with belt rub starts. From what I've read on alot of these tractors.

Very clear and concise. Thank you

Like