วีดีโอ

You use this for support interface or whole support ?

Did you have any ventilation or filtration? TPU gives toxic fumes when printed.

Hi, I. replaces the fan, but they don't move. Any clue where I should looking next? Thanks!

Thank you so much

if its in the middle its 0.025

Is the K factor saved to the new filament preset which is made after the extrusion multiplier calibration?

LOL the resin printer ROOK

Hello thanks for the good explenation, bud i get stuck, i have the creality cr10spro v2 with mainbord Creality 3D V2.4 and in visual studio there are a lot of creality mainbords but not mine, is there an solution for this, thx

Dude, thank you for this video. I printed a skull that has celtic markings all over it using the "support for PLA" product and it was awful. Its still stuck in all the small gaps even after using tons of force to get it off. Just not a good experience there. So I bought some PVA to try for a reprint. Glad to see it worked out here.

This is one of the best 3D printing tutorials on TH-cam!!!

I ordered TPU and i wait them Until now i print pla,pla with silver powder and pla plus. The pla with silver powder its the most strong from the others pla

Finally got it working! This is exactly what i needed, thank you so much

Great video! Fixed my problem. Thank you!

If you don't know, you should fill the plate with multicolor jobs, you could get maybe 6 of the frogs and the poop would be the same as if you only did one.

Lol this project took a minute, he had long hard by the time he finished it

thank you for sharing the design process and journey. Make me miss my Nardi wheel.

How infill density did you use?

hi thanks for the info do you have to change any settings on your Bambu printer? I have the same printer and looking to print high speed overture filament, thanks.

Excited to get an Extruder! Where can I get them shipped to Wisconsin?

Hi, what sofware are you using to generate the different segments with different settings? That looks super usefull for testing new materials or even different brands.

I can’t find anyone online that can help me, what if none of these print at all. Is it adhesion issues? Sunlu is a POS lately. Everything prints fine with other brands and same exact settings.

I have my TPU 99% tunned but bridging I cannot still fix... I have an ender 3 v2 modded for direct drive, klipper and orca slicer.

1) some beautiful hair ya got there 2) greatly helpful to see the process and cool to see the ams taken apart!

I know this is a year old but it’s still an excellent tutorial. Thank you for the crash course in messing with code. I think that’s about as deep as I want to go.

what connectors did you uses looking for the right size

I don't think you needed all of that support for the little lip, but it looks nice anyway

Hi, sorry to bother you, it’s the first time I try to compile my own firmware and I’m practically a novice at using visual studio code. Each time I open the file I get an error on dev containers, the same error you get when you open the file. At 6:17 in the video. In addition I get a lot of errors on the define function and I don’t know how to fix anything of this. Obviously with this situation it gives me an error message when I try to compile. Can anybody help me?

Are those stepper motor current levels peak current or RMS?

You have any issue using cardboard with the AMS?

no blabla only good content. Thank you 🙂

I've been using 3d printers for a good while. I see my speed top off after the bottom layer is done and it stays that way till the end where at the last 3 to 6 layers it slows. So this doesn't apply to all printers. Most new printers, print like mine with very little down time on speed accept for complicated prints.

How do you decrease the step?

I had read that the flexibility of the high speed isn't nearly as good as the "regular" Overture TPU. Since you've used both, what do you think?

Please pay attention... The Automatic Calibration for Flow Rate on Textured PEI Plate is not supported, and it's not recommend performing the Flow Calibration on it, to avoid print quality issues. The texture of the plate can interfere with the LIDAR calibration resulting in bad calibration results.

Obviously an alignment issue with the printer itself, thats the reason im here and its only a couple weeks old, can see the belt is rubbing against the top of one of the pulleys, even started to wear the belt.....2 weeks old, not impressed tbh hopefully this trick will fix it or its going back

Thanks great video. I know how hard they are to put together.

I did this and mine is still making the same noise any ideas ?

THANK YOU !

Pretty good, thanks.

Mines is making a cracking popping noise on center of y axis ?

I think you have something off in your vref calculation. I may be wrong but I think vref = 1.385*Imax.

vearyy!! good!! video!! learn me veary much and you are talking whit experisens

this is super cool! Perfect for anyone who is working, tinkering and generally gets very immersed in an activity but still needs a connection to the outside world and avoid a very disgruntled significant other!!!

No unnecessery bloat. Straight to the point and shown with good example. Subscribed!

So, after watching your video and learning more about Marlin, I took a look at my 4.2.2 board. On the SD slot it has a decal "T8" what stepper driver is this? FYI My machine is an Ender 3 Max Neo, the number on my chip set is GD32F303RET6.

Thanks mate !

That was incredible. Every part of that fascinated me. Great product, great video. A craftsman in his natural element.

I think this idea is really neat! This would be helpful to have for significant others that are always in the garage 🤪

Thank you very much i have designed with this the gearing for my hand crank generator

quite useless without telling the print settings here...