วีดีโอ

Another tip to spread that pinch bolt from the strut is to slide in couple of 2ps in the slot. Slot the bolt the other side and tighten it. This will spread the hub.

Loving the content. Maybe worth investing in a little pop up gazebo. 😊

Amazing video how much roughly did it cost in parts was this to to?

That's a neat job. Can't wait to see it working. 👍

Great to have the project back. In Germany with my FL2 for Christmas and my webasto is lovely . Looking forward to the next video Scott. Best of luck.

😂 thought you had given up, merry Crimbo an all the best for new year 👍

I cant believe you do all this on your drive!

I bloody enjoyed watching it mate!😊 but I don’t think my anxiety wouldn’t take it if I go through very deep water on flooded road in my normal car! In case the water gets into the cold intake and into the engine causing all sorts of trouble!

What is visible inside just behind the bulkhead?

Skip to 0:39 if you want to see Beavis coming past!😊

Great video very informative, I'm actually a bit scared now trying to do it myself, knowing my luck I'll probably end up snapping them in the engine, but I'll give it a go, PS you could get away with doing a voice over for Jeremy Clarkson You have a voice that's easy to listen to 👍

that video is hard work. watch powerful uk.

really hoping for a miracle next weekend when i'll be able to try to fix my mist and draining problem. THanks a lot, Beavis

You can change it easily then that

Just buy the gap

What's all the correct level oil to use please.

The link has gone for the popper Clips. Have you got another link? Great video, looking to fo this on mine.

Ok so how as it lasted and what does it look like now after a year, please let us know.

I recently got a pair of these … just looking at videos they don’t seem to be much brighter than standard halogens just that they give whiter light but when I install them I will see… I installed them today Dec 20..2024 they give off a whiter light compared to my standard halogens just that those were 100/90 and put a lot of light down road because of the lower wattage on the Philips guess they will be cooler … don’t see much improvement in terms of brightness just that these are whiter and look more modern …. Nam Jamaica

vorrei ordinare il kit della mia landrover freelander 2 del 2007

so the facelift lamp can be retrofited in with an easy swap? No coding or additional wiring needed? i'm shopping around for an L359 and not sure whether to pay the £1k+ premium that the facelift model commands in the used car market.

Just to add my thanks for all this work you have put in creating these videos. I'm an old hand but none the less having this kind of resource is absolutely invaluable. My 2011 Evoque is going back together nicely with the new plugs. I must say I've never seen so much design and engineering go into a fuel filter mount!. All the very best and thanks again.

That approach to glow plugs works fine on the older basic on/off systems. All the more modern cars are different. Even my freelander 1’s glow plugs are controlled by the engine ecu not the ignition switch. The factory manual states on the freelander 1 that the ecu decides whether or not to use glow plugs and for how long to heat them, the ecu’s decision is based on the battery voltage and coolant temperature. In cold weather or anytime the engine ecu can keep the plugs on for a few minutes after startup in order for the engine to run smoothly and to reduce emissions. So for this system to work well you need 4 good plugs, a good battery and a good temp sensor. To maximise its starting potential in cold weather wait ten seconds after turning the ignition on, then crank it. Mine starts within 2/3 compressions even when it’s frozen.

I need the number of the bell

Very nice explanation. Were you battling to start when hot and cold? I've got an issue with my FL2 where it doesn't want to start when hot, no faults have been logged

Worked for me !! Thx from Brazil !! 🍺

si può avere tutto il kit in italia? e quanto costa?

Hi. Tnx for the video. On my evoque 2013 2.2 diesel ptu started to make noise. Inside is all black and have some space on part where drive shaft come. What is the problem?

Hi, are these still in stock, I’ve got your grill mounts before and they were ace, would love to have some of these brackets for the roof bars.

Thank you for doing this. It was a pain in the a*** to figure out the clip Lego thing. Then I watched your video and it all made sense..😂

Thanks for the help, I bought this from Ebay and the seller didn't send me the brackets!

Wait so the legislation allows you to have led high beam?

The Phillips will probably last longer than the Halfords.

Na -3 ne moze da upali, sta bi da je bilo -4 ili -5 recimo ,😃😃😃😃, tebi čovječe auto nije u redu

You gave me an idea by put the volt meter on!! I actually fitted the volt meter today and it actually looks good and it’s not too bright while driving at night! Where did you rewire the voltmeter to? I’m worried about having the flat battery the next day as it’s always on.

IT WORKS!!! 2012 Facelift Auto. Don’t know how you worked this out but you are a hero! 🦸‍♂️

great video do you have a video on servicing the haldex unit plus oil spec and quantity?

Im having these fitted on my Picanto. Dark roads the current ones are like candles.

Excellent video series, thanks Scott

At 1:28:06 I bet the pedestrians were like “don’t be such a child with that bloody horn!!”😅😅 I did the same thing by drive through the tunnel, and I’ve been insulted by one of my family member in the car saying “you’re such a child!!”🤣🤣

Thanks for the video. It worked really well. I put some masking tape on the paintwork to avoid scratching and used a stiff feeler gauge to push against the locating catch. Thanks again.

Save the claw hammer for nails . I pulled out the 10 pound sledgehammer. Think I’m gonna try a spring compressor to get another inch to get the bottom of the strut out tomorrow. The sway bar was hitting the knuckle. It won’t go down anymore. Don’t really want to mess with this control arms. But we’ll see and may have to do it like that. Thanks for your video.

A rubber o ring has come off the windscreen washer pipe it's inside the light. You can see it in the video it mat leak from there too making you think it's the seal

How much was the clutch replacement out of curiosity? my dual mass is getting noisy

Starts at 2:50

I don’t understand why people think it’s clever to steal rear light clusters from other people’s cars? People have no life but to commit crime by stealing something that doesn’t belong to them….🙄🙄

Ill do that in the summer. What years are without the swirls, as ill look for some 2nd hand ones (without swirl)

The grease is more for high impact areas, bolts, arms, springs etc.

Looks good can it program the keys like the autel

Bonjour je m’appelle Rachid je veux votre aide pour avoir le livre mécanique freelander 2 190 c sd4 2011 svp