- 14
- 49 934
Osric Currey
เข้าร่วมเมื่อ 8 ธ.ค. 2016
Closing any K Series 5 Speed manual transmission K20 & K24
This video shows how to close a 5 speed Transmission without having to eyeball where the tapered cone ring is supposed to be positioned.
มุมมอง: 106
วีดีโอ
Waterman Mechanical Fuel Pump with Hi Flow Check Valve.
มุมมอง 12610 หลายเดือนก่อน
If you are (considering) using a mechanical fuel pump, as you’re only source of fuel supply, check out this product to help make your car start much easier after long periods of inactivity.
K24z7 Transmission with Tsx/Accord shifter box & cables with 1320Automoto & K-Tuned bracket
มุมมอง 4.3K2 ปีที่แล้ว
This video provides an option to make some of the K24Z7 & K24z3 transmissions work in different chassis outside of the 2008-2015 models. 
OEM K Series LSD VS MFactory / Quaife LSD
มุมมอง 8K2 ปีที่แล้ว
Functional difference between an OEM Civic Si L-S-D vs an Aftermarket L-S-D such as Mfactory/Quaife Helical Limited Slip Differential.
Separating Honda Civic Wagon RT4WD Viscous Coupler Discs AWD
มุมมอง 5103 ปีที่แล้ว
This video explains the separation process for the viscous coupler that is used in many Honda/Acura cars when converting to AWD.
1000hp K20 AWD Civic on the dyno
มุมมอง 5863 ปีที่แล้ว
Small clip from tonight’s Dyno session. Didn’t record every single run and final sheet isn’t posted. Fully Built JBRE K20 with a 6870 Gen2 with a GearX tranny built by myself. Fabrication done be Brian Extreme Motorsports. The best out there. ✊🏾✊🏾✊🏾 tuned by none other than Derf tuning. Wiring by my brother & myself with a wireworx harness. Setup definitely has more in it. Shout out to all the ...
K20 Crx AWD Turbo at OSW
มุมมอง 2653 ปีที่แล้ว
My first time at the track in Orlando with the AWD setup on the Crx. Hp range at the time was around 600. 24” slicks in the front and 23” in the rear. Time was 9.7@140
K24z7 Shifter Bracket V2 & Installation
มุมมอง 1K4 ปีที่แล้ว
This video introduces the updated version for the adapter plate that is offered for the 9th gen Civic Si transmission. There’s also instructions on how to assemble the bracket to the adapter plate and showing how it functions.
How to remove the counter shaft needle bearing for K series transmissions
มุมมอง 15K4 ปีที่แล้ว
If you do not have access to a bearing puller, this is a very easy and simple way to remove the needle bearing.
How to install a VSS speedo ring gear on a K Series Differential.
มุมมอง 7064 ปีที่แล้ว
This video shows how to get the VSS speedo gear back on the diff without breaking it. (I know it’s been 2 years... lol. forgive me please)
2012-2015 Honda Civic Si K24z7 Transmission case removal
มุมมอง 6K5 ปีที่แล้ว
This video shows you how you can open up your K Series Manual Transmission.
2012-2015 Honda Civic Si K24z7 transmission internals removal
มุมมอง 5K5 ปีที่แล้ว
This video serves the purpose of showing how to remove the internals of the transmission from the casing.
How to remove a Speedo Drive gear (K series) K20 K24
มุมมอง 3.9K6 ปีที่แล้ว
This video provides instructions and assistance with the removal of a K series Speedo gear for those that need to swap it to another LSD
K24z7 Transmission Mount & Shifter setup
มุมมอง 4.2K6 ปีที่แล้ว
This video talks about being able to use a (2012-2015) K24z7 transmission in a 8th gen (2006-2011) Honda Civic Si chassis or even a swapped chassis
Mann saved me some grey hairs. That a like
I bought a k swapped eg years ago and thought they robbed the lsd from the z3 transmission because one tire would spin the opposite way. Now I know I'm stupid 😂
I need this how can i purchase!!!???
Message/email me. 954-914-3428 1320automoto@gmail.com
I need this brackets asap!! Is it in production
Yes. Email me @ 1320automoto@gmail.com or message me 954-914-3428
My hero im very interest about buying the kit SR coul you please answer me the email? il send you a one email
1320Automoto@gmail.com
Thank you so much for showing how to disassemble this transmission!
Can the transmission form the k24z7 fit directly with the k24z3 from the 2010 Honda accord coupe ?
Yes. The K24z3 uses the same exact transmission housing
@@Ocurrey1320 thank you 🙏 trying to do full bolt ons , the civic so lsd transmission and a tune . I’m curious how much power I can get in my accord with that alone . Maybe a turbo as well in the future .
Great trick. Worked like a charm. Thanks.
Hey I’m looking to build a k24 for my 9th gen just to straight swap in once it’s ready. If I get a k24a would the z7 trans bolt up? Would I need to get a k24z3 or z7
Just not sure what all a 8th/9th gen transmissions differences are still new to the Honda world
The K24z7 and K24z3 transmission are identical in case design. Both bolts up and have the same bolt pattern
@@Ocurrey1320 thank you so much. And thank you for keeping up with your community you just gained another sub You just made my week💙
@@iankeller8448welcome to the Honda world! Hope you like it here!
@@iankeller8448thanks for subscribing!
Where can I buy the plate you sell I need it really bad
Send me a message. 954-914-3428
Where can I buy?
Send me a text. 954-914-3428
So if I install this on my 9th gen si with gearx 1-4 my speedometer should read of off the stock vss location? It reads zero allowing me not to get vtec
No. The 9th Gen reads VSS completely different from 02-04 Rsx/02-05 Civic Si… Pretty much Digital vs Analog. Your car reads the VSS off of the 3rd gear. What’s happening is your VSS is either too far from the 3rd gear.. or it already touched and is damaged. You need to properly shim the VSS when you put in aftermarket gearset such as that one. Remove your shifter mechanism and look down in there and see how close or far the sensor is from the gear.
Oh man, I'm glad I found your channel. I'm running a K24z in a 2012 Accord and I'm researching on what manual trans I can use for this engine. No one is really making content discussing the Z engines. I'm gonna watch your trans swap video tomorrow. I want to do a 12 si 6 speed but they are high dollar. What about buying a K24z2 manual trans and dropping in the RSX type S gears into the case? I'm open for any help in the right direction.
What’s kind k series transmission is the 2nd one ?
Both are identical. K24z7. 12-15 Civic Si. At @ 1:40 it states it
How much for the bracket u made
Thanks Legend
👍🏾. 🤜🏾🤛🏾
Osric, you have a fantastic product and a great depth of knowledge. I plan on picking up this bracket from you as time progresses. What i wanted to know is, i have this K24Z7 trans that i will be pairing with a JDM K24A. Am I strictly limited to the 04-08 TSX cables and shifter box? Or would I be able to use the 03-07 Accord OEM Box 54100-SDA-A01? I ask because the TSX box is discontinued.
You can actually use either of those boxes. They both achieve the same result.
Does this work for b series too?
Honestly never tried. I don’t see why not though
Anyway, to remove the bearing without pulling it apart like that?
Unfortunately not. But it is very easy to separate and to put back together
I have a 2000 civic with a k20z3 and a k24z7 transmission with rsx shifter cables and I have an rsx shifter box and k24z7 shifter box with the stock selector
What should I do to make my setup work
@@Broken_Ek you will need an Rsx Shifter Mechanism from a Type S. And then K-Tuned has a bracket to make it work
@@Ocurrey1320can you send me the link to the ktuned bracket
Bought this bracket last week. The bracket fits very well. Everything straight bolted up. Thank you!!
Thank you for your support!
Do you sell that kit?
Yes I do. Email me @1320automoto@gmail.com
will this work with 2017-2022 civic 6 speed
Unfortunately, no. The configuration of the shifter cables for that year transmission is different and not compatible.
@@Ocurrey1320 ok thankyou will the internals fit inside a 04 accord 5speed case?
@@bpoman1234 No sorry they won’t
Hi, are you talking about the helical/torsen type Mfactory LSD or the Clutch /plate type (1.0,1.5,2.0) Mfactory LSD?
I had to remove it from my car because it made so much noise when turning
I have a 05 rsx type s and I’m swapping a k24a with a 2013 SI 6speed trans what is needed to make this possible?
Honestly, I would just recommend getting the internals swapped over into the RSX casing. The rear mount will not bolt up and the only solution for the shifter cables is to purchase the K-Tuned Bracket for the Race Spec Cables and you have to swap out the shifter mechanism for the Type S one. And still find a solution for the rear mount/bracket situation
Nice work man, saved me the headache of having my mechanic do the work😂
Hi can you help me find a shift cable for a 5 speed accord 2.4 four door
Car-part.com
Still no results
@@angelosweeting1933you can also try EBay, Facebook marketplace, offer up. They are all over. I sourced mine from a local junk yard. It came with a transmission I purchased from them
Can a 2007 accord own work
It is not showing up on ebay for that year
So this transmission will work with 04-08 TSX engine and chassis?
No. It will not work with the Tsx chassis for those years. The driver side mount will not match up.
@@Ocurrey1320 ok thanks. Could I use the 04-08 TSX or 03-07 accord transmission case with 9th si gears and lsd?
@@tongtyyang yes you absolutely can. However be advised…… Your Cruise control will only work in like 3 years. 2 3 5 if I’m not mistaken. Certainly not 6th. The ratio is too far away from the OEM TSX 6th gear ratio and the RPM/Speed being put out won’t match what’s registered in the ECU for those gears since the ratios are different. If they are close close, it will work. But when it’s too far apart, nope
@@Ocurrey1320 much appreciate it
Your only fix for this would be Flashpro for the TSX
I say your video and I was wondering can a civic 8th gen cable work with a TSX type-S selector mechanism?
When is a time you recommend swapping out the bearings?
When the input shaft bearing goes or when you cook a bearing and send shrapnel though the case would be my take. Probably optional even with the input shaft bearing bad.
Just received the adapter plate today and worked using Z3 trans bracket and cables. Thanks again 🙏
Happy to hear that man! Enjoy!
@@Ocurrey1320thanks for the great video, do u think I can use the stock k24z7 shifter cables/bracket with a kswap shifter box?
@@lucabellantoni5350 unfortunately not. The cables will only bolt properly to either one side. So either the K swap box and K24z7 cables will bolt up and the tranny side won’t, or the tranny side will bolt up and the K swap box side won’t.
You’re making it harder than it seems with that lsd by cocking it. Stick your thumb in the hole and pull straight out
It’s really interesting, because I have the K20Z4 (European version of the K20Z3) swapped into my EK chassis. I used the K-tuned TSX shifter (KTD-TSX-AC2) with the K-tuned Civic SI shifter cables (SFT-CAB-611) on the OEM gearbox bracket and it almost works, but not quite. The gearbox side cable behind the bracket is just 5-10 mm short of movement to fully go into third gear. When the engine is not running it seems to go in, but when running it pops out. Could you confirm that this is the reason why you use the bracket setup as shown in this movie? Also, the bracket that you use, is not compatible with some of the shifter cables, because that bracket has a different way of mounting.
Your problem seems to be that you’re mixing Tsx and Civic Si Parts that are basically OEM replacement and since the cables don’t have any adjustment capability, things will be a little off. You can either use Race Spec cables that will adjust, or change the setup so that the shifter box and cables are for the same transmission style and it will work properly. My bracket was designed to bridge a gap between this transmission and different chassis options
Euro friend here! I’m using a k20z4 trans in my k24 swapped eg, currently running the hybrid racing k20z3 no cut shifter mated with fn2 cables but i dont like it. From the video the bracket Made by Osric looks like it has the same bolt pattern of our k20z4 cables bracket so using it with the old k tuned tsx cable bracket should work.
@@Ocurrey1320 i’m gonna reach you out via mail Because i have few questions about the bolt pattern.
@@trdbus4769 I currently doin a fn2 swap into an eg chasis and hybrid racing recommended their fd2 shifter cables with the z3 no cut shifter box
@@danjko888 when i reached out to them last year they were not sure if the fn2 or fd2 cables would work. Now i’m waiting for parts using the bracket in the video mated with stock tsx/accord shifter and cables.
Yoo, thank for the video Osric, something is rattling around down on the undercarriage, I've a feeling I may have either chipped a gear or the input shaft (still learning how to drive stick 😅) from my earlier attempts at driving, I'm doing some research on doing a tranny rebuild incase I have to, I'd rather not pay the $3-$5k if I can help it. Hoping maybe I just burned the clutch (got the infamous clutch smell a couple of times) the rattling seems to go away with gas so it might be a pulley but it sounds like it's coming from underneath at least when I sit in the cab, car's srill driving fine but the rattle got me worried for sure
Thanks
Greetings guy. Is it possible that a 2012 honda accord shift cable can work on my 2012 acura tsx
Yes the transmission case/shifter cable bracket is exactly the same
Where did you find the shift cable from
Do you think I could take the internals from a 2002 rsx type s and put those in a 2012 si transmission casing and that it would work??
Yes they are all interchangeable. Old to new and new to old. Just make sure you check for the distance between the 3rd gear on the countershaft and the speed sensor to make sure it is not touching or too far away depending on whatever K series internals are being used.
@@Ocurrey1320 okay thank you 🙏
@@Turbook247 you’re welcome 👍🏾
I have a picture of the gap I put inbetween the speed sensor and 3rd gear I’m not sure if it’s enough space tho anyway I could send you a picture?
@@Turbook247 just get it as close as possible WITHOUT them touching.
m factory 1-4 drag kit is good for 500 -650 max hp street car ?i want gear kit for my turbo fn2 typer .is ok or just not?
I really need this in my slow 7th gen k24 accord. It will bolt and I can even use my shifter box and cables, but what do I do as far as a tranny mount for the 7th?
What is better mfactorY or quife for high 600-800HP on streets. For the best traction on both wheels. Thanks
Neither will be "better" per sé. They both will get the job done and have about the same longevity for that hp range. You can't go wrong with either decision you make.
I have a 2012 si tranny going into an 2000 civic em1. I have the 06-11 stock shifter cables… can I use this, the stock shifter cables and pair it with hybrid racings no cut z3 shifter? Many thanks
Do you use red or blue loctite or non on the final drive bolts?
I’ve done blue and I’ve done it without. Don’t really see the need for red. If you’re going by OEM spec according to the manual, it makes no mention of a form of loctite being used. The bolts should be tightened to 83ft lbs of torque. You shouldn’t have an issue either way if done properly.
Do you know the torque specs for the countershaft hex bolt? Is it 89lb/ft?
@@headported 87ft lbs
thanks
@@Ocurrey1320 Dry no loctite on that bolt right?
Thanks for this!
You’re welcome!!
does the k24z7 work with the ekk2 mounts in? or is it still not compatible at the moment
No. You would need the EKK5 mount kit The EKK5 mount kit works with the 08-13 Accord, 09-14 TSX and 12-15 Civic Si manual transmission
@@Ocurrey1320 ok cool i might send you a text didint want to bother you so i asked here in case some one else knew
@@Ocurrey1320 can you bolt in the k24z7 trans in a ek with EKK5 mount kit?
@@crxthermal yes.
These videos are awesome. You have such a good way of walking through it. Just wish you had a vid for putting it back together!😂
Thanks! I'll definitely make a video on that for everyone real soon.
do you have the part number for the Ktuned bracket? and where i can buy your adapter?
The K-Tuned Part number is CSI-CAB-BIL To purchase my bracket, contact me directly at 1320automoto@gmail.com, or text me at 954-914-3428
2015 accord cvt solutions? Has anyone swapped that out or completed an engine n trans successfully yet?
I'm planning on doing a trany swap from a 2015 acura tlx 2.4l 8 speed auto into a 9th gen accord 2.4l cvt
@@AccordzDIY sweet how much for that or an auto swap for turbo possibly 🤔
That’s nice bro but I’m having a hard time finding a link to buy this
Just email or text me. Ocurrey1320@gmail.com 954-914-3428
just saved me in a pinch thanks for the info 💪🏽💪🏽💪🏽
Is a oem lsd or the m factory lsd better? Or do they perform the same? Thanks!!
The stock K series diferentials are not good at all unfortunately, the aftermarket ones are redesigned and perform lots better, even the one named somehow like black(something) costs arround like 600 euros and perform waaaay better than stock