วีดีโอ

Thanks, Drew, for taking the time to make this video. I’ll be laying out a ton of effects on the TRIO 28. I’ve built a number of large pedalboards using wood, so I have a good understanding of setting up proper signal flow and running patch cords. Temple Audio products are exactly what I’ve been waiting for. I’ll be able to approach my next project knowing that I’ll end up what an elegant solution. Between the wealth of information posted by experienced users like you, and resources such as Pedal Playground, I’ll be able to get past any quirks in the building process. Many years ago my dad, who was a highly experienced electrician with an eye for detail, introduced me to beauty of zip ties and their accessories. I wish he was around to see the results of this build. Anyway, thanks for the mini-workshop, and the inspiration to get busy.

then the strymon ojai needs an adapter? cioks dc7 doesn't need one.

what size templeboard is that?

I run with a D1 delay as well. I find i dont actually use all the goodies that it has to offer. Walrus Audio is a great liitle boutique pedal company. They stand by their product.

I have some questions regarding my board what’s the best way to contact you?

how do you hook up both units? I want the Iridium for amps and the stomp for modulation and interface. I also want to disable the iridium every now and then just to use the stomp with other amps. how does the wiring go? thanx

Охрененное сравнение! Спасибо, пойду куплю Rous

Sounds great, what reverb/ambient FX are you using in the opening twenty seconds of the video with the iridium?

Do you use the fx loop for the stereo reverb? Or are you going purely mono into simplifier then stereo out of simplifier?

Does having the power brick mounted under the board run the risk of adding extra unwanted noise

what pedal is making those glitchy octave up cascading reverse sounding noises in the intro?

Nice video, and rad board! Question? Regarding your Goldenface OD, since that's always on, would it have been possible to remove it from where it currently is, move the tap tempo delay into its space, move the Tumnus and the Speculan Tempest (spelling?) down, and then finally put the Goldenface OD on the top?

I bought an HX stomp for direct recording and tried for like 2 years to be happy with the amp modelling, my main amp is a Friedman Dirty Shirley 40 and so I go for that open, warm low to mid gain Marshally thing.. I tried with the stomp, bought a bunch of IRs, etc.. never really happy with it. Bought an Iridium a few weeks ago and was instantly "this is much better, more real, touch sensitive, tone, etc.." I am running it direct with HX Native for some verb/delay. I want to just play it not constantly jacking with it trying to be happy.

Any walkthru of the intro? XD fx / settings used?

Lol. I have the same power supply, compressor, and morning glory.

The video sound is pretty good, beyond my imagination

Hey man, I ordered these cables based on your recommendation, and I got the Amazon cable from the link under the video. I’m sitting down with the board now and I’m trying to power from a strymon Zuma. But the 2.1-2.5 cable doesnt sit tight in the green end of the current doubler. Is there something I may not be doing right? Or was it loose for you too. I noticed it made the Stomp super sensitive, turning on and off, so if there’s a more reliable way, I’d rather try it.

Really great. I too have used Temple Boards for years, and about to build a new one. My key tip is: Use 3M pedal tape. Much better, much easier. But be sure where you place your pedal :-)

3:28 6:28 9:28

will this work w hx fx?

What size board is that?

Don't forget about the excellent " Pedal Tetris " mini program on Temple Audio's homepage . It certainly helps a lot with layout and with which Templeboard to purchase !!!

Do you still have the guitar? If so, you still lovin it? I’m ordering a set this week, but I’m having a very difficult time choosing between grinders, cremas, or a neck crema and bridge grinder🤔

What pedalboard is that underneath? Pedaltrain Metro?

That’s a lot of compression. Thanks for the demo though!

What’s signal path?

If I get a 2.1mm to 2.5mm cable, will this power the Eventide H9?

Hey man I did exactly what you did and it didn’t work for me. (I doubled checked to make sure I had the right cables.) My HX stomp isn’t powering on with your set up. I noticed after that my HX stomp says 3A 9VDC. Could that be the issue? If not, what else could I look out for?

idk if its been tackled in the vid but can you connect stomp via midi to the strymon? stomp acting as a command center?

Cool Channel! very nice!

Cool!

Hi ! , I used the current doubler with the 2.1 to 2.5 cable and it still doesn’t turn on :(

What guitar are you using ? The tone is very nice.

I think i have the same size temple board. I’ve been using since 2015 and it’s such a great pedal board. Highest recommendation.

I love recording and playing with the Iridium it sounds gorgeous. Though I’m highly considering selling all my pedals for the Neural DSP Quad Cortex.

Hey drew. Looking super, um, gangster fresh

The intro alone got a thumbs up and a subscribe. Sooooo lush and creamy!

If you have a pedal that is on all time, like your compressor, try mounting it underneath. Yes there is a screw that will come through but you can have the screw sit between pedals.

Some great pedals there! My tip would be to forget the mounting plates... instead, use that clear gel tape they sell on Amazon. It's thick and reusable, sticks great and easy to remove... a 2" x 2" square is all you need! ...It will also provide more mounting positions. If you have pedal feet you don't want to remove, you can stack the tape higher.

Apparently his site offers a couple mods to improve the quality of components. I wonder if I can even hear the difference.

Hi Drew, how similar and dissimilar is a low output pickup like Crema to a filtertron, such as Powertron? They’re both labeled as single coil style HBs. Thanks!!

Definitely a game changer for me, since i use it my other od and boost pedal only be a decoration for my pedalboard 😀😀 Btw ur tone needs more low its too typical digital multi fx in my opinion...try it maybe ull like it 🍻🍻🍻

Great video! I just ordered an Iridium, and my Stomp is going on Reverb. The Iridium tones are so much better than the Stomp. This confirmed that I'm making the right gear choice.

Wow a real person, not a cartoon. I think you speak very well. Very pleasant experience to watch this great review. Packed with straight to the point information. Just what I was looking for. Thanks!!!

I hate strymon... Currently run volante and iridium, don't see a way not to use them. Hard to argue with the power those 2 bring in a midi setup.

Great video Thx which temple board is that you have here ?

Thanks for this video and your positivity! Really helpful info. I just got an iridium and can’t wait to start recording with it.

Subscribed!

Hi Drew and thanks for the explanation. I have an HX stomp and considering to power it in a different way. In my pedalboard there's only the Stomp and a Wireless receiver (Sennheiser Pedalboard ws set) that needs 500 mA of power, plus a switch and an Expression pedal that are passive. The 1Spot Trutone power adaptor has 1700 mA of capacity. Do you think I can power both my devices in daisy chain with that power adaptor instead of buying an Ojai or DC7 Cioks or whatever? Thanks

if you use Bad Cat or Laney......you're easily set for everything you could want