- 97
- 644 791
Rist Innovations
United States
เข้าร่วมเมื่อ 13 พ.ค. 2022
This channel is for 3D printing enthusiasts, laser engraving lovers, and woodworkers of all skill levels!
My recent focus has been on 3D printing and now I am including laser engraving/cutting in my bag of tricks.
My goal is to provide useful and entertaining content on these topics and more to help you on your "Maker" journey.
Please join me on this journey so we can learn and grow together!
My recent focus has been on 3D printing and now I am including laser engraving/cutting in my bag of tricks.
My goal is to provide useful and entertaining content on these topics and more to help you on your "Maker" journey.
Please join me on this journey so we can learn and grow together!
Do you REALLY Need a Filament Dryer for your 3D Printing?
In this video I test four types of filaments; PLA, PETG, TPU, and ABS for their sensitivity to moisture by soaking them in water for 7 days! Then I dry them using three different filament dry boxes so you will want to see the surprising results. This video is brought to you by PCBWay, your one-stop-shop for PCB’s, injection molding, 3D printing and other services. Check them out at pcbway.com/g/5uwW1e
#3dprinting #pcbway
Chapters
00:00 Introduction
00:58 Running the Wet Filament Experiment
03:28 Reviewing the Wet Filament Experiment Results
05:58 Comparing 3 Filament Dry Boxes
07:03 Recommendations & Observations
Affiliate Links
EIBOS Polyphemus: shop.eibos3d.com/collections/eibos-prodect/products/pre-order-eibos-3d-filament-dryer-polyphemus
FixDry Double NT1: fixdryofficial.com/collections/collections/products/fixdry-high-value-3d-filament-2-spools-compatible-dryerbox
GratKit Firefly Dry Box: amzn.to/4a4TKxS
My Etsy Store Link: ristinnovations.etsy.com (It's LIVE!)
My recent videos:
"1st Production Peopoly Magneto X 3D Printer Arrived!": th-cam.com/video/gzUffgUqsCs/w-d-xo.html
"TOP 40 Tools for 3D Printing (in 18 minutes)": th-cam.com/video/B5NNg3bjXTo/w-d-xo.html
"BEST Budget 3D Printer: Bambu A1 + AMS Lite Review": th-cam.com/video/E4tcZHAY8ss/w-d-xo.html
"Top 10 Bambu Upgrades": th-cam.com/video/j-bIt8YQH0k/w-d-xo.html
DISCLAIMERS:
Some of these links go to one of my websites and some are affiliate links where I'll earn a small commission if you make a purchase at no additional cost to you. As an Amazon Associate I earn from qualifying purchases.
#3dprinting #pcbway
Chapters
00:00 Introduction
00:58 Running the Wet Filament Experiment
03:28 Reviewing the Wet Filament Experiment Results
05:58 Comparing 3 Filament Dry Boxes
07:03 Recommendations & Observations
Affiliate Links
EIBOS Polyphemus: shop.eibos3d.com/collections/eibos-prodect/products/pre-order-eibos-3d-filament-dryer-polyphemus
FixDry Double NT1: fixdryofficial.com/collections/collections/products/fixdry-high-value-3d-filament-2-spools-compatible-dryerbox
GratKit Firefly Dry Box: amzn.to/4a4TKxS
My Etsy Store Link: ristinnovations.etsy.com (It's LIVE!)
My recent videos:
"1st Production Peopoly Magneto X 3D Printer Arrived!": th-cam.com/video/gzUffgUqsCs/w-d-xo.html
"TOP 40 Tools for 3D Printing (in 18 minutes)": th-cam.com/video/B5NNg3bjXTo/w-d-xo.html
"BEST Budget 3D Printer: Bambu A1 + AMS Lite Review": th-cam.com/video/E4tcZHAY8ss/w-d-xo.html
"Top 10 Bambu Upgrades": th-cam.com/video/j-bIt8YQH0k/w-d-xo.html
DISCLAIMERS:
Some of these links go to one of my websites and some are affiliate links where I'll earn a small commission if you make a purchase at no additional cost to you. As an Amazon Associate I earn from qualifying purchases.
มุมมอง: 882
วีดีโอ
How to Master the Creality Laser Rotary Kit Pro
มุมมอง 1.2Kหลายเดือนก่อน
In this video I will show you how easy it is to expand your laser engraving capabilities using the Creality Laser Rotary Kit PRO. I’ll cover features, unboxing/set-up and engraving full wrap tumblers, drink glasses, jewelry rings, and spherical objects such as Christmas ornaments. This video is brought to you by PCBWay, your one-stop-shop for PCB’s, injection molding, 3D printing and other serv...
1st Production Peopoly Magneto X 3D Printer Arrived!
มุมมอง 21Kหลายเดือนก่อน
I have just received one of Peopoly’s 1st Production units of their new Magneto X 3D printers. I’ll show you the printer’s features, unboxing and assembly, set-up, and making LOTs of parts! I’ll even show you how to install the insulation upgrade kit! This video is brought to you by PCBWay, your one-stop-shop for PCB’s, injection molding, 3D printing and other services. Check them out at pcbway...
TOP 40 Tools for 3D Printing (in 18 minutes)
มุมมอง 4.5K2 หลายเดือนก่อน
The right tool for the right job! I have chosen the top 40 tools to make your 3D printing journey more enjoyable and successful. I’ll also show you where you can get them. This video is brought to you by PCBWay, your one-stop-shop for PCB’s, injection molding, 3D printing and other services. Check them out at pcbway.com/g/5uwW1e #Bambulab #3dprinting #pcbway Chapters 00:00 Introduction 01:09 As...
BTT Panda Touch | Worth the Risk to Upgrade ALL Bambu Lab Printers?
มุมมอง 2K3 หลายเดือนก่อน
The Big Tree Tech Panda Touch is a potentially major upgrade to the Bambu Lab 3D Printers, especially for the P1 Series. The 5” LCD screen is portable, can control the AMS, and it can wirelessly connect and control up to 10 Bambu Lab printers. This video is brought to you by PCBWay, your one-stop-shop for PCB’s, injection molding, 3D printing and other services. Check them out at pcbway.com/g/5...
Mastering the Creality Falcon 2: From set-up to Projects!
มุมมอง 1.4K3 หลายเดือนก่อน
Here is a Complete Guide for the Creality Falcon 2 22 watt laser engraver: Initial set-up, using LightBurn software, installing an exhaust system, and making some cool first projects, brought to you by PCBWay, your one-stop-shop for PCB’s, injection molding, 3D printing and other services. Check them out at pcbway.com/g/5uwW1e ZBANX for Creality Falcon 2 Link: s.zbanx.com/r/1i6gIoi3nyeQ Code: N...
Better than Bambu? | QIDI Tech X-Max 3 3D Printer Evaluation
มุมมอง 9K4 หลายเดือนก่อน
Let’s cover the QIDI Tech’s X-Max 3 special features, performance, and my special upgrade; brought to you by PCBWay, your one-stop-shop for PCB’s, injection molding, 3D printing and other services. Check them out at pcbway.com/g/5uwW1e #QidiTech #3dprinting #pcbway Affiliate Links: PCBWay: pcbway.com/g/5uwW1e QIDI Tech: qidi3d.com?sca_ref=5115614.vooG7cVw1M This Video Other Links: Maker World H...
The 9 BEST Upgrades for your Bambu Lab A1 Mini Printer!
มุมมอง 22K5 หลายเดือนก่อน
Description: I have designed 9 upgrades to the Bambu Lab A1 Mini and AMS Lite that will take your printer to the next level. All of the upgrades are my original designs that you won’t see anywhere else. This video brought to you by PCBWay, your one-stop-shop for PCB’s, injection molding, 3D printing and other services. Check them out at pcbway.com/g/5uwW1e #bambulab #3dprinting #pcbway Componen...
BEST BUDGET 3D Printer: Bambu A1 + AMS Lite Review
มุมมอง 6K6 หลายเดือนก่อน
Bambu Lab's A1 Mini could be the best 3D Printer for beginners, this video brought to you by PCBWay, your one-stop-shop for PCB’s, injection molding, 3D printing and other services. Check them out at pcbway.com/g/5uwW1e #bambulab #3dprinting #pcbway My recent videos: "Top 12 Interviews @ERRF" (Part 1): th-cam.com/video/D-mtpf4CFvY/w-d-xo.html "Top 10 Bambu Upgrades": th-cam.com/video/j-bIt8YQH0...
Top 12 Supplier Interviews at ERRF 2023 (Part 2)
มุมมอง 2387 หลายเดือนก่อน
This video series contains my top 12 supplier interviews from the 2023 East Coast Rep Rap Festival (ERRF). Part 2 includes the last 6 links below, brought to you by PCBWay, your one-stop-shop for PCB’s, injection molding, 3D printing and other services. Check them out at pcbway.com/g/5uwW1e #ERRF #3dprinting #pcbway Part 1 Peopoly Interview Video: th-cam.com/video/HqS217RaUyk/w-d-xo.html Peopol...
Top 12 Supplier Interviews at ERRF 2023 (Part 1)
มุมมอง 3487 หลายเดือนก่อน
This video series contains my top 12 supplier interviews from the 2023 East Coast Rep Rap Festival (ERRF). Part 1 includes the first 6 links below, brought to you by PCBWay, your one-stop-shop for PCB’s, injection molding, 3D printing and other services. Check them out at pcbway.com/g/5uwW1e #ERRF #3dprinting #pcbway Part 1 Peopoly Interview Video: th-cam.com/video/HqS217RaUyk/w-d-xo.html Peopo...
The Secret of the Peopoly Magneto X: Linear Motors for 3D Printing
มุมมอง 3.7K7 หลายเดือนก่อน
This is the launch of the NEW Peopoly Magneto X 3D Printer using magnetic linear motors. Since there aren't any stepper motors, belts or rollers, Peopoly believes that this printer will be quieter and require less maintenance than typical 3D printers and it will reduce the post-processing of 3D prints! The 400 mm x 300 mm x 300 mm build volume will be able to handle many sizes of models. Curren...
Ep. #1: 3D Printerman Rescues Disorganized Hairdresser!
มุมมอง 2K7 หลายเดือนก่อน
Ep. #1: 3D Printerman Rescues Disorganized Hairdresser!
The 10 BEST Upgrades for your Bambu Lab 3D Printer!
มุมมอง 269K8 หลายเดือนก่อน
The 10 BEST Upgrades for your Bambu Lab 3D Printer!
Fixed my Bambu Lab 3D Printer Upgrade for only a Penny!
มุมมอง 8K8 หลายเดือนก่อน
Fixed my Bambu Lab 3D Printer Upgrade for only a Penny!
BEST Beginner's Guide to 3D Printing: Easy Steps to Get Started Quickly!
มุมมอง 1.6K9 หลายเดือนก่อน
BEST Beginner's Guide to 3D Printing: Easy Steps to Get Started Quickly!
Which is BETTER: Prusa MK4 or Bambu Lab X1 Carbon 3D Printer?
มุมมอง 73K10 หลายเดือนก่อน
Which is BETTER: Prusa MK4 or Bambu Lab X1 Carbon 3D Printer?
Comprehensive Guide: Bambu Lab X1 Carbon w/AMS 3D Printer Set-up
มุมมอง 38K11 หลายเดือนก่อน
Comprehensive Guide: Bambu Lab X1 Carbon w/AMS 3D Printer Set-up
BEST way to mount anything to hollow core doors!
มุมมอง 27Kปีที่แล้ว
BEST way to mount anything to hollow core doors!
ANOTHER Simple Woodturning Project that SELLS!
มุมมอง 145ปีที่แล้ว
ANOTHER Simple Woodturning Project that SELLS!
How to Easily make a Beautiful Chess Set- The Board and all the Pieces!
มุมมอง 293ปีที่แล้ว
How to Easily make a Beautiful Chess Set- The Board and all the Pieces!
Here are Absolutely the 6 Most EFFECTIVE Pocket Hole Joints!
มุมมอง 142ปีที่แล้ว
Here are Absolutely the 6 Most EFFECTIVE Pocket Hole Joints!
Here is the GOOD, the BAD, and UGLY about Pocket Hole Joinery!
มุมมอง 186ปีที่แล้ว
Here is the GOOD, the BAD, and UGLY about Pocket Hole Joinery!
Clever Miter Saw Upgrades I should have done sooner- Some NEVER Seen Before
มุมมอง 680ปีที่แล้ว
Clever Miter Saw Upgrades I should have done sooner- Some NEVER Seen Before
Enhance Woodworking Projects using Pewter - The EASY Way!
มุมมอง 183ปีที่แล้ว
Enhance Woodworking Projects using Pewter - The EASY Way!
How to install 7 of the BEST table saw upgrades = Improved Performance
มุมมอง 6Kปีที่แล้ว
How to install 7 of the BEST table saw upgrades = Improved Performance
How to make the ULTIMATE Featherboard Hack for your table saw!
มุมมอง 738ปีที่แล้ว
How to make the ULTIMATE Featherboard Hack for your table saw!
New ULTIMATE Push Stick: Beautiful Form and Function made for all Woodworkers!
มุมมอง 2.3Kปีที่แล้ว
New ULTIMATE Push Stick: Beautiful Form and Function made for all Woodworkers!
Surprisingly the ONLY Push Block and Feather Board woodworkers need!
มุมมอง 2.4Kปีที่แล้ว
Surprisingly the ONLY Push Block and Feather Board woodworkers need!
Well congratulations I see many videos but this one is very important about safety because I see many people don’t appreciate the fingers because don’t use proper protection specially for kik back wood which can kill you and many people taja that for granted thanks my friend it was honestly very good video I hope other people see this and realise how important is working whit wood how dangerous become in the process I like to keep my fingers first an my life work whit wood is enjoy situation convert a piece wood in something amazing to the eyes of someone people any way I will take all this vídeo especially this one today to Colombia to show my friend to see because few years back have and accident and finish up in hospital piece wood stack in he chest kick back in Colombia no carpenter use this safety measures the can no afford tha is to expensive there but you can make your self any way I say hello from London England 🏴 thanks again 🙏👌
I’m glad you liked the video. Thanks for taking the time to provide your detailed feedback!
Looks like the light is sold out at amazon.
Do you need both sets of corner brackets (lines 6&7) ? Looks like they are essentially identical other than the number of screws required to fasten them.
That’s a good question. The 4-screw corner brackets have T-nuts that can only be mounted by sliding in the end of the extrusions. The 2-screw version allow you to rotate the T-nuts in the extrusions without having to slide them down from the end of the extrusions. I hope this answers your question.
@@ristinnovations it does, from an assembly standpoint, you would need to make sure you slid in all your t-nuts at the very beginning if you stuck with the four screw version. Since you need two sets worth of brackets, it makes sense to buy both. Thank you for your reply!
I can't believe people are debating if owning something that needs to be constantly fixed is preferable to one that just works so you can use it....
Another printing newbie here to thank you for such a detailed quick start. You've got yourself a sub!
I’m glad you found the video helpful. Thanks for your feedback (and sub)😊
👍🏾👍🏾👍🏾👍🏾👍🏾Ty for this vid
Thanks for your feedback!
Thank you for the input keep it up!!✌
Thanks for your positive feedback!
hi, thanks ! can you share your setting to engraver all of this ? thanks
Can this fit a creality ended 3 s1 pro ?
I agree and just bought a Prusa MK4 factory reassembled and it works great.
Very informative 💯🙏🫶
I’m glad you liked it!
Great Video - special greetings to chef Luigi with his great cooking skills.
Lol, Chef Luigi is my “twin”😊. Thanks for your comment!
I like it, great video but i gonna try to build a fullly enclosure
Sounds good. I think Bambu Lab doesn’t recommend a full enclosure because the electronics wouldn’t be protected so you may want to look into that further.
HAHAHA!! Love the chef performance. Thank you SO much for this valuable information. Really helpful.
I’m glad you liked my twin, Chef Luigi😂. Thanks for your positive feedback!
Great video! Thanks for sharing the results you found. I just bought a Bambu X1C and transitioning out of pla filament.
You are welcome! Good luck with your X1C.
I own Prusa clone printer (not that hard to make since it is open source). I used bear frame for it, dragon hotend, every part I have is slightly better, despite stepper motors - these are the same. It costed me less than 500 bucks. And the hardware is slightly better than stock. So for me clones are way to go - but of course it comes with quite a bit of tinkering and basicaly zero consumer support since I`m not anyones consumer lol.
And I forgot to mention, it`s ugly AF since printed parts are made from brown filament - looks like crap, quite litteraly.
It sounds like you have quite a talent to assemble your own printer!
@@ristinnovations friend of mine does actually. I own it but I am not the one who assembled it :D
PLA and especially silk variations of PLA become brittle when they have absorbed moisture and this can be fixed by drying the spool. I've had extreme examples where the silk PLA filament kept breaking during a single print to the same spool after drying being trouble free.
Hi Steve, you bring up a great point regarding the silk PLA. Thanks for your feedback.
Thanks for the information! I was thinking about getting a filament drying box, but I have only recently started 3D printing, and haven't progressed beyond PLA yet. I also live in the UK, where it isn't often too humid (wet, but not humid!) I keep my opened filament in vacuum sealer bags with dessicant, so only ever have one roll out at any time (no AMS on my A1 Mini!) I will just carry on as I am for now!
Hi Paul, In your case it sounds like you have a great system for managing your PLA. If you expand to other materials you may need a filament dryer, but I agree with you that for now you don’t need a dryer. Thanks for your ongoing support of watching my videos😊
Thanks Ken! I like following your channel, as you keep things simple enough for beginners like me to understand! 😳 Keep up the good work! 👏
Luigi! 😂
I’m glad you liked him😊
Thanks for your video. When using the " PTFE Extruder Bracket" is it then still possible to close the lid on top of a X1C printer?
Yes, I have my glass top on my printer and it has been working great for several months. Thanks for your comment!
Hey, can we get those lazy suzan plans/parts list? Looks like something I could saw pretty easily, if I just know the dimensions and turning piece. And wonderful review. The X-Max 3 is now my top contender for a printer upgrade! (I have a VERY old CR10 that I've optimized, but I want to print large ABS/ASA armor pieces for my son and myself with less warping & drama)
The dimensions of the plywood are 2’ x 2’. The lazy Suzan part is from McMaster Carr, P/N 18635A52. Thanks for your comment!
@@ristinnovations You're welcome. Thanks for replying!
Thanks for the video!
You're welcome!
how you able to not get images distorted when printing on surface. On my test i'm getting distorted image i.e. 40x40mm imagine yet on surface X axis no issue on height yet width on Y axis it can be as much at 70mm wide..
That seems very strange. I recommend that to contact Peopoly about your issue. I have found them to be very responsive to my questions.
I own a Ankermake M5, which so far has been a great printer and fairly reliable. But now, I actually want to add a Prusa MK4, so I can learn to build one and learn more about 3D printing. I build a lot of RC cars and good with building in general, so I feel like I want the challenge to build the MK4 and then have both the Ankermake M5 and Prusa MK4
Few other bits of information that may help someone with the decision. X1C: - The filter works ONLY when the internal fan is on, so it will be useless when you most need it - when printing ABS - The first layer sensor works only with a smooth bed. - The LAN only mode locks you out of any firmware updates. - The AMS unit is not compatible with some spools, there is a hydra mod for it but you will loose the warranty if you do it. - The "logs" that the printer sends "home", where decoded and they contain everything including stl files you print and camera snapshots. - There is a sweet spot in 3d print speeds, the faster you print the weaker the parts, speed is not always important - Every time there is a new prusa you have the option to upgrade your printer, with bambu your only option is to sell it. The list is much longer but that're the main things that made me pick MK4 over x1c. Shame I had to wait a year for MMU3, a touch screen and input shaping.
Thanks for taking the time to provide your detailed comments!
My understanding is that the customer service is horrible for Bambu Labs.
Excited to see what Prusa does in their next gen printers(Mk5 and beyond) now that the Bambus are out
Creality K2 multi colour, 350 cube, enclosed out in a few Months
10:58 that workout, at 5:00, increased your working speed 😊
ROTFL 5:00
Basically a P1P/P1S with AMS. Would be great if a color display could be added to replace the displays on P1P and P1S.
Big Tree Tech offer the "Panda Touch" LCD screen for the P1P/P1S, however you need to be aware of firmware compatibility between Big Tree Tech and Bambu Lab.
Im getting a printer for work and I'm really torn between the value of the P1S Bambu with AMS and Prusa MK4. I really want one that has an enclosure but also is extremely quiet for office printing.
It sounds like it's a tough choice for you. Both printers are reliable and will produce high quality prints so it's a matter of the other aspects that are important to you (open-source vs. closed-source, price, etc.)
why didn't you call steve first before wasting all this time :).
LOL, That's what I should have done!
Are they shipping the insulation upgrades pre-installed now? I just received mine earlier this week.
That is my impression. You will be easily able to see once you unpack your machine. There should be a cover plate on the bottom of the printer that hides the power line wires and the platen should have a silicone rubber padding on the underside.
So Bambu has enclosure/camera which gets it 5. Prusa has neither and gets 4? what would it take to get a 3 or 2 then? SHouldn't that be 0?
I was including the optional Prusa enclosure with my scoring. I don't think Prusa offers a camera so that is one reason why I rated it less than the Bambu Lab. Thanks for the comment.
Minor thing. Putting the Hygrometer in the dessicant container at the front gets an artifical reading being so close to the dessicant. If you put one in there and one inside the AMS you will see very different readings.
You are probably right about that. I have found the hygrometer gives a good indication when the desiccant needs to be replaced/refreshed.
Bambulab should not get 2 for open source. They are fully locked down and don't even allow firmware upgrade when when not connected to their servers. They should get 0 in that category.
That is a fair statement. That is the beauty of my scoring system is that each person can modify it to more closely match what features are important to them.
would a pro not be the ability to print a print without connecting to the communist cloud?
really great
Slave is a Crazy Name 😂
I watched your youtube channel and I see that you are making amazing content. I really like your videos. Even your audience also likes it, But you deserve more audience on your channel. I analysed your youtube channel and I see that your SEO (Search engine optimization) score is very low. That's why you can't grow up on youtube. I am a professional digital marketer and expert in youtube SEO. After SEO your video will rank on search engines and you will get a targeted audience on your channel. SEO helps videos to get reach. That's a youtube algorithm. Let me know if you want to know more about it.
I just refuse to order the Bambu printers because, like any other Chinese products, they will always be a lower cost because of their dominance in manufacturing. To me its more of just stopping the China machine, a lot of us should be more conscious about where greed has taken the world.
In your video you say that PRUSA has live support and shows a video of people with headsets on. This is not true. They support via chat. You also mention about people who like to work on things and show a guy working on a PC which is different than building a 3D printer
I was just using stock video to provide a broad overview/concept.
I don't know, the cloud stuff and closed source concept are a big no for me. I want to be able to fix stuff on my own and tinker with the firmware.
I have a Prusa MK3.5 and it has been a great printer. I am looking to upgrade and naturally coming from the Prusa Ecosystem I was planning on getting a MK4. After looking everything over I have decided on the Bambu P1S. It just makes sense when you do a cost benefit analysis. The economy is bad with no signs of improvement and I want to get the best deal for my hard earned money.
I think the Bambu P1S is Bambu Lab’s best value. It is fully enclosed so you can print a variety of materials, but it doesn’t have the cost of the X1C. I hope you have a good experience with the P1S.
Thanks for the video
I'm glad you liked it!
Thanks for all the work you did in compiling and presenting these great upgrades. Your links to printed and purchased materials are extremely helpful! You have a new subscriber. 👍
Thank you for your positive feedback and for becoming a subscriber!😀
Hello there! Your TH-cam channel is absolutely fantastic, and your content is top-notch. While your channel and each video are performing well in terms of SEO, there's definitely room for improvement, particularly in the Title, Description, and Tags sections. Additionally, focusing on promoting your videos to specific social media groups could greatly enhance your subscriber base and viewership organically. Thank you!
Interesting printer, thanks for sharing
Thanks for your comment!
Good to see the upgrades! Thank you!