วีดีโอ

Saved our lives today! Thank you!

Perfect instructions! This worked with the LG pump from Amazon. Thorough and great step by step. I would add, our pump housing was not secured with a clip, but rather 3 bolts.

Thank you. Great video. You filled in several key points/functions in the de-install and install that Roma glanced over. Also noteworthy is the whole machine and the repair is visible in your video. The benefit with his is he showed and explained comparisons to the older with the newer machine. Watching both filled in the gaps.

Please tell me this motor run clockwise and anti clockwise

Thanks for explanation. May i have a question, what for is the hose that You connected last and goes up?

This was awesome, saved me some cash for a repair call.

Thank you for this video . Made my job super easy !

I feel bad you don't have a drill but thank you for the video

Thanks GTR^2 for the detailed disassembly and assembly. Got mine fixed and down to 58~63dB down from mid 90s. So much quieter and such a relief. One comment. The spring loaded locking nut is keyed. I struggled to get it back on until I realized that the bottom has to be positioned a certain clocked direction or you will not be able to compress it down and lock it. A note to others who might want to go through this procedure.

Our pond is apx 3500 gallons. Can we use the smaller barrels, or should we go to 55 gallon?

Nice video. Thanks for sharing. Minor point- the part with the rotating shaft is the rotor and the housing has the stator. Thanks again!

I was able to change the pump from the underside by removing the the plastic cover bottom left front (filter basket and drain hose). The is 1 screw at bottom front (may need to gently pry bracket out to get screw driver shaft on the screw head) and 2 other screws underneath you can see through the rectangle cutout underneath (I also cut some of the plastic bottom for easier access to the bottom side screws during reassembly). Then all you need to do is remove the hoses and rotate the pump assembly out and disconnect the wires to the recirc pump and the drain pump. Both pumps are easy to get to. This saved me from removing the front panel and you don't need a socket set to remove the pump bracket.

❤❤❤

❤❤❤

❤❤❤

Thanks for your help …. Fixed mine and the blue color is gorgeous.

They look like common goldfish to me. I do not see any barbels on these. You do have some nice goldfish. They look very healthy too.

Nice filming! 👍

How many gallons was your bog and same for your pond? Thanks

None of them are koi...

Thanks man, saved the day. Or should I say, saved my wallet from having to buy the wife a new machine.

What power is your air pump used please

Another happy customer!!! Best self-help video on TH-cam.

Outstanding video. My machine sounded like a 747 taking off and now its back to sounding quiet.

Another happy viewer here. Quiet as a mouse (relative to the 747 taking off it was anyway!). Deffo a bigger, creamier crema too. THANKS!

My wife and I just took our machine apart and replaced the bearing...it works and is so quiet! Like you, the small vertical spring in the front popped off...wasn't sure where it went until we re-watched the video. Thank you for posting.

Excellent video. Thanks! I bought my machine 6-7 years ago. When the noise started I putted in the basement and haven't used for 4 years. Accidently got your video searching for my daughter Nespresso repair. I use the link for the bearing and the seller comes with 12 pieces for $13 CAD in Amazon. Parts town Canada is asking for $34 for 1 piece. Took me 20 minutes to repair and my machine is better then when was new. Thanks again!

I am not a mechanical person at all and am so thrilled I figured this out, thanks to your video. After much trial and error (and very helpful comments), I have my coffeemaker back! I thrifted it for $10, so it has only cost me $18 after this repair (and, I suppose, the astronomical cost of pods). I’m enjoying some Golden Caramel coffee as I wrote this. Helpful hints: - The cover is easier to remove if you spread the back and front on both sides. I gently used flathead screwdrivers to help me keep the back spread as I worked to spread the front and pop it off. - The stainless piece on the water tube needs to have the mouth of the C aligned with a small divot on the place it rests, with the post standing up. If you do not do this your coffee will taste like gritty water. (I had to take it all apart again to fix this). - The front spring arms coil around the post and face outwards on the white plastic piece, not inwards towards the center spring. - The nut over the ball bearing was extremely tight and can be loosened with a ratchet (be careful not to strip the plastic).

How do you clean teh bog filter?

Why are the barrels kept step by step? Can we keep all 3 barrels at the same level?

Great Video...was about to toss the machine as the bering had completely seized. QUESTION: Have it all back together and running smooth, but now with a new Pod installed it is making very weak coffee with no froth...any ideas?

can i please have all the plumbing parts sir. please please

Wonderful video

What are you thoughts regarding cleaning the Gravel after time?

I changed the bearing out in my identical machine in less than 15 minutes, with thanks to your video. Thank you very much for uploading. Fixed for $5 :).

We did the whole process and placed in a new bearing, the machine worked fine until it did not make coffee but just watery mix. So we took it all apart and checked to make sure everything is seated fine. It seemed like the machine was not sucking water through the lines anymore. We did a reset according to the Nespresso instructions. Still nothing. Has anyone encountered that problem?

Good video, Thx.

a

Can you come do this to mine🥺

Thank you! Great video that helped me fix this issue.

Thank you so much for this video!! You gave such clear and detailed instructions. It was easy to follow along (with strategic pausing 😅) and now I have a machine that sounds like it is fresh out of the box. It’s so quiet and I am so great full!!

OMG thank you so much

Much quieter now! However, the coffee is much weaker. I tried doing g the factory reset which seemed to make a difference with only a few cups. Tried the reset again and no luck. Any suggestions?

Nice video great set up

How do you clean it out?

Thank you so much. Our bearing had metal shards and I am ordering a replacement. The Amazon link to bearing is helpful. Subscribing to your channel and looking forward to watching the Koi pond videos.

Sick bogg, but Who made the music!!??

Thanks for your clear guidance . Regards Peter

How often do you need to clean the bog and how to do it?

Just looking at turning my brick built above ground level pond in to a bog filter to waterfall in to a larger ground level pond. From the UK and a wooden built filter container would last about 2 years max. Really helpful video. Out of interest, would you know the best plants to choose for our climate? 👍